Single-turn Absolute Encoder A/359Z

Budget-friendly price Request a quote
Hollow through shaft H7 up to Ø15 | Ø59 | Up to 8192 steps (13 bits) | Parallel NPN open collector | 5, 15, 8–24, 18–28 or 10–30 V | IP64 shaft (IP65 sealed) | Gray code only

The ELCIS 359Z (A/359Z) is a 2-13 bit through-shaft optical single-turn absolute encoder, similar to the 359ZM model but without coupling.

As an optical single-turn absolute encoder, with LED source and phototransistors, the A/359Z offers up to 8192 steps per turn (13 bit) in Gray code, with parallel output and open collector NPN stage, via a 1 m cable with radial output.

It has a Ø59 mm housing and a hollow through shaft H7 made of stainless steel of Ø6, Ø8, Ø10, Ø12 or Ø15 mm for 4 kg of radial/axial load, withstands impacts of 50 G and vibrations of 12 G, and works between 0 and +70 °C with IP64 protection on the shaft side (IP65 in sealed version).

  • Resolution of 2 to 13 bits: until 8192 steps per lap.
  • Hollow shaft intern of Ø6 a Ø15 mm.
  • Five power ranges: 5 V and 15 V ±5 %, 8–24 V, 18–28 V and 10–30 V.
  • Impact resistance of 50 G (11 ms) already vibrations of 12 G (10–2000 Hz).

Technical Frequently Asked Questions

What resolutions does the A/359Z offer?

In Gray code, 8, 16, 32, 64, 128, 256, 512, 1024, 2048, 4096 or 8192 steps per revolution. Other resolutions available upon request.

What hollow shaft diameters does the A/359Z support?

Hollow through shaft H7 of Ø6, Ø8, Ø10, Ø12 or Ø15 mm; other diameters available upon request.

What connection and output does the A/359Z have?

Parallel output with 10 mA open collector NPN stage, via 1 m cable (CV, IP65) with radial output (R).

Properties

FeatureSpecification
Mechanics
Exit stageNPN open collector 10 mA (standard)
HousingØ59 mm
AxisThrough hole H7: Ø6, 8, 10, 12 or 15 mm, stainless steel (customizable upon request)
max radial/axial load.4 kg
Electric
InterfaceParallel (standard)
Exit-side protectionIP65 (CV cable)
Feeding5 V ±5 % · 15 V ±5 % · 8–24 V · 18–28 V · 10–30 V
Max. consumption.200–400 mA according to number of bits (customizable upon request)
Max frequency.50 kHz (customizable upon request)
Exit codesGray
Max resolution.8192 steps/turn (13 bit)
Protection and environment
axle-side protectionIP64 standard • IP65 sealed • IP53 low torque
max. continuous RPM6000 standard · 3000 sealed · 8000 low torque (intermittent: +30 %)
Impact/vibration resistance50 G (11 ms) 12 G (10–2000 Hz)
Operating/storage temperature0 … +70 °C / -30 … +85 °C (customizable upon request)
ReferenceConfiguration
A/359Z15-G-512-5-CV-R-03A359Z15G5125CVR03Ø15 shaft · Gray · 512 steps/revolution · 5 V ±5 % · NPN open collector 10 mA · Parallel · 1 m cable · IP65 · radial output
ELCIS A/359Z Single-Turn Absolute Encoder
Dimensional drawing of the ELCIS A/359Z single-turn absolute encoder

Related documentation, cases, and guides

Other products

Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Thread Ø 0.51 mm | Stroke 1000, 1500 or 2000 mm | Pot. 1 kΩ, 4–20 mA, 0–10 V, 0–5 V | Incremental option (I) | Supply 5, 12 or 24 V ±5 % | Linearity ±0.25 % fs | IP54
DPF Sensors logo
Resistive linear position sensor with spring probe • up to 200 mm • ±0.1 % FS
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Section 18×46 mm | Stroke 70–1240 mm | Resolution 5, 1 and 0.5 µm (x4) | Line driver output (VD) | Power supply 5 V ±5 % | IP53 (IP64 with compressed air) | Accuracy ±10 µm (opt. ±5 µm)
Disibeint Electronic, manufacturer of level sensors and control relays
CONDUCTIVE ELECTRODES WITH BUILT-IN AMPLIFIER
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
B10 flange Ø115 | Shaft Ø10 h7 | 1 to 10000 imp/rev | NPN, PNP, push-pull, line driver | 5–30 V | IP65 shaft (IP66 sealed) | ATEX II 2 GD, Ex d IIC T6/T5
DPF Sensors logo
Pressure transducer + temperature sensor
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Contactless, separate actuator | Hollow shaft Ø4, 5, 6, 8 or 10 mm | 8 to 2048 pulses/rotation | Line driver 26LS31/ET7272, NPN | Power supply 5, 8–24, 18–28, 10–30, 5–30 V | IP67 shaft | 30000 rpm, 1 MHz
Official logo of Novotechnik, manufacturer of linear sensors, position transducers, and industrial encoders
Output 0 … 10 V or 4 … 20 mA | Profile 18 x 18 mm | Stroke 25 … 150 mm | Linearity ±0.075 … ±0.2 % | Repeatability ±0.002 mm | 16 … 30 V | IP40
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Shaft Ø4, 6, 8, 9.52 or 10 mm H7 | Flange Ø59.5 mm | 1 to 2540 impedances/revolution | NPN, PNP, push-pull, line driver | Power supply 5–30 V | IP53 shaft side | Elastic, electrical zero alignment
B&C Electronics – Italian manufacturer of industrial water sensors and analyzers
ST315.21, Measuring range 0 to 2,000 mS, extendable and submersible. Working range 0 to 40°C
Shopping Basket