NCVR DB INOX * with level relay
CONDUCTIVE ELECTRODES WITH BUILT-IN AMPLIFIER
- Manufacturer: Disibeint Electronic
- Category: SENSORS, Level Sensors, Level Sensors for Liquids
General purpose level control for conductive liquids. The amplifier is integrated into the head itself, reducing costs and installation time and facilitating start-up.
Properties
- Compact electrode holder for low-height tanks
- Process connection: DN25 flange. AISI316 (1.4401) stainless steel
- Electrical connection: Junction box. PBT
- +70 ºC. 5 kg/cm². IP67
- With 2 electrodes: 1 level point control
- With 3 electrodes: maximum/minimum control
- Polyolefine PE coated electrodes option
Other products
Multipurpose Blanking Plate for OEM Customization Range: Virgin chassis without pre-drilled holes (boreholes) for extreme industrial adaptations
Incremental sensor | Direct motor mounting | Hollow shaft Ø6 to 12.7mm | 5V to 30V power supply | Push-Pull or NPN output | IP65 side protection | Max speed 6000 RPM | Starting torque >15 gcm | Weight 95 grams | Bearing life 1.5 billion revolutions
Power supply: 5V DC | Shaft diameter: 4-8mm (Steel) | Output: Push-Pull | Protection: IP54/IP65 | Bearing life: 1.5 x 10⁹ revolutions | Pulses per revolution: 1-2500 PPR | Maximum frequency: 100 kHz | Weight: 180 grams (Standard) | Temperature: -10-70 °C | Connection: Terminal block
I/38 Miniature Incremental Encoder
Wire displacement sensor, ranges from 100 mm to 1200 mm, with output signal in 5 Kohm resistance, 0-5 / 10 Vdc, 4-20 mA, RS485 or pulses, option with IP67 environmental protection
Dual Inductive Metrology | Limit 10,000 N·m | 12,000 RPM | PCD Flange 196.0 mm | Accuracy 0.05% | Inertia 0.0463 kg·m²
High Capacity Inductive Torque Transducer (20,000 … 30,000 Nm)