IKTR Resistive Linear Position Sensor | Spring-loaded probe
Resistive linear position sensor with spring probe • up to 200 mm • ±0.1 % FS
- Manufacturer: DPF Sensors
- Category: Displacement, SENSORS, Potentiometric linear sensors
The IKTR resistive linear position sensor it's a industrial linear potentiometer with spring-loaded probe, designed for accurate linear displacement measurement in automation applications, OEM machinery, test benches and position control.
Its robust construction in anodized aluminum, along with its resistive element of low thermal drift carbon film, It provides a reliable, stable and long-lasting solution for demanding industrial environments.
Main features
- Spring-loaded probe for permanent contact
- Available travel lengths: 10, 15, 25, 50, 75, 100, 125, 150, 175 and 200 mm
- Linearity: ±0.1 % FS
- Repeatability: 0.01 mm
- virtually infinite resolution
- Nominal resistance: 2 kΩ / 5 kΩ depending on range
- Robust body in anodized aluminum
- 3-wire cable output (1 meter)
- Lifespan: up to 10 million operations
- Wide temperature range: -40°C to +120°C
Applications
- Industrial automation
- Linear actuator control
- Special machinery and OEM
- Test benches
- Linear travel measurement
- Mechanical position control
- Hydraulic and pneumatic systems
This model belongs to our range of resistive linear position sensors, developed to offer reliability, precision and long service life in industrial applications.
Properties
| Technology | Resistive linear position sensor (linear potentiometer) |
| Drive type | Spring-loaded probe |
| Effective route | 10 / 15 / 25 / 50 / 75 / 100 / 125 / 150 / 175 / 200mm |
| Damping travel | 2 mm at both ends |
| Nominal resistance | 2 kΩ (10–25 mm) / 5 kΩ (50–200 mm) |
| Linearity | ±0.1 % FS |
| Resolution | Infinite |
| Repeatability | 0.01 mm |
| Maximum speed | 5 m/s |
| Maximum current | ≤ 1 mA |
| Maximum voltage | 40 Vcc |
| Temperature range | -40 ºC … +120 ºC |
| Shelf life | 10 × 106 maneuvers |
| Body material | Anodized aluminum |
| Resistive element | Low thermal drift carbon film |
| Electrical outlet | 3-wire cable, 1 meter long |
Manufactured by DPF Sensors, a brand specializing in industrial linear displacement and positioning sensors.
Other products
LVDT displacement sensor, pencil type, diameter 8 mm, repeatability better than 1 micron, ranges 2.5, 5 and 10 mm.
58 mm square flange | Resolution up to 8192 steps/revolution (13-bit) | Gray, Binary, Excess, and BCD codes | Parallel, SSI, or analog (mA/V) output | Power supply: 5 V, 15 V, 8–24 V, 18–28 V, or 10–30 V | Ø6 h7 stainless steel spindle | Max. radial/axial load: 2 kg | Shaft-side protection: IP64 (IP66 sealed) | Max. continuous speed: 6000 rpm (8000 rpm under torque) | Operating temperature: 0…+70 °C
Process relay v/i. Digital setpoint with numerical preselectors
Housing Ø44 mm | Aluminum base and steel cover | Front centering Ø20 h7 | Solid shaft Ø6 h7 | 1 to 2500 pulses/revolution | Max. frequency 100 kHz | Power supply 5÷24 V | IP54 protection | Weight 100 g | Operating temperature -10 … +70 °C
ATEX Certification | Electrochemical Technology | Titanium and Zinc | RS485 Modbus and 4-20mA
Solar radiation sensor, pyranometer
Signal duplicator – isolator 0/±10V input: 0/±10V (24V/20mA) isolated output 2 x 0/±10V power supply 24VDC (20.. 30V) isolated
Isolate 4/20mA or 0/20mA signals, 2 channels, do not need auxiliary power supply, they are placed as a simple transformer, double
Amplifier for proportional solenoid valves – intensity regulation (Torque)