DPLVDT-20-xx
LVDT displacement sensor, ranges from 10 to 40 mm, with or without probe, with separate electronics.
- Manufacturer: DPF Sensors
- Category: Displacement, SENSORS
LVDT displacement sensor, ranges from 10 to 40 mm, with or without probe, with separate electronics.
Available ranges 10, 15, 20, 25, 30 and 40 mm, with the separate amplifier that allows output signals in Vcc, mA and RS485. The combined error is better than 10 microns, with a linearity of up to 0.1% FE
IP68 environmental protection
Properties
Other products
Inductive Differential | Ranges 24 mm to 360 mm | Frequency 10 kHz | 30.0 mm PCD Flange (Support) | Housing Ø 10/12 mm | IP68 / M12 Optional
Isolate 4/20mA or 0/20mA signals, 4 channels, NO auxiliary power supply required (FOUR CHANNELS IN THE SAME BOX)
3-way isolator: ± 0/10V input, isolated excitation (24V/20mA), isolated output ± 0/10V, isolated 24VDC (20.. 30V) power supply
I/38S Miniature Incremental Encoder, shaft diameter 6.35×10, housing diameter ø 38×45.5, Pulse range: 1÷2540
Multiplexer for 4 or 8 3-wire Pt100 or Pt1000 probes at the output of the same probe
Universal 2-way galvanic converter/isolator. Input: 0…500 mV, 0…700 V, (solar spatial up to 1500 V) / 20 mA, PWM. Multiple output: 0/10 V (0/5 V DC) and 0-4/20 mA.
Aseptic Optical Telemetry | 110,000 – 150,000 N·m | 7,000 RPM | PCD flange 400.0 mm | Inertia 2.4909 kg·m²
Inductive Transducer | 1,000 N·m | 20,000 RPM Limit | 101.5 mm PCD Flange | Class 0.02% | Inertia 0.0033 kg·m²
Universal converter for potentiometric position sensors (100 Ohm/500Kohm). Multiple outputs: 0-4/20mA, 0/10V and ± 0/10V. Power supply: 24.. 230VAC-DC (±15%) isolated.