DPF-CX300

Linear Range 0-5mm | Sensitivity 4mV/µm | AISI 4140 Stainless Steel | Probe -30 to 180°C | Driver -20 to 80°C | M16 x 1 Thread | Frequency DC-10kHz | Linearity <1% | PEEK Tip | PTFE Cable

NDIR CO2 controller sensor (4000 ppm) RS485 output with LED signaling

Power supply 5V | Shaft Ø10mm Stainless Steel | Weight 600g | Protection IP65 | Bearing life 1.5×10^9 revs | Max RPM 3000 | Starting torque 18 gcm | Temperature 0-70°C | Pulses/rev 25000 | Frequency 100kHz

Safety tilt controller for platforms.

NCTE Rotary Torque Sensor | 4000 Series | 1,000 Nm | 5,000-10,000 RPM

Housing Ø37 mm | Shaft Ø 5 mm / 6 / 8 mm Stainless Steel | Operating Temp. 0 – +70 °C | Resolution 2 to 8 bits (4 to 256 positions) | Max. Load 0.5 Kg | Max. Frequency 50 kHz | Weight 100 g | Vibration 12 G (10 – 2000 Hz) | Impacts 50 G x 11 ms | Power Supply 5V | Protection IP65 | Bearing Life 1.5×10^9 Rev

Housing Ø80 mm | Shaft Ø 6 mm / 9.52 / 10 / 11 / 12 mm Stainless Steel | Operating Temp. 0 – +70 °C | Resolution 2 to 13 bits (4 to 8192 positions) | Max. Load 5 Kg | Max. Frequency 50 kHz | Weight 650 g | Vibration 12 G (10 – 2000 Hz) | Impacts 50 G x 11 ms | Power Supply 5V to 30V | Protection IP65/IP66

Pressurized LVDT | 20 mm Range | M18x1.5 Insertion | Withstands 315 Bar | IP67 | Integrated 4-20mA/0-10V Output

Precision Mechanical Support for Laser Aiming Range: Mechanical adjustment of +/- 4° on two axes for stable readings at long distances

ATEX Certification | Electrochemical Technology | Titanium and Zinc | RS485 Modbus and 4-20mA