SPt-50×6-x)M

The BPSE load cell, used to measure compressive forces in industrial applications, especially test benches. Measuring ranges from 500 kg to 350 tons.

THERMOHYGROMETER H. Rel., Dew point, Temp., Wet bulb

I/63SC – Incremental Encoder Ø 63 mm, “servo-mount” for direct coupling, configurable resolution up to 25000 ppi

Safety relay for protecting power systems from 230VAC errors due to 400VAC faults.

Power supply 5-30V | Anodized aluminum base | Anodized aluminum cover | Weight 2300g | Stainless steel shaft Ø11mm | Max load 15kg | IP rating 67 | Max RPM 3000 | Starting torque 200gcm | Bearing life 1.5×10^9 revolutions

Weight 600g | Shaft Ø10mm Stainless Steel | Maximum Load 3kg | IP Standard 65 | Maximum RPM 6000 | Starting Torque >25 gcm | Bearing Life 1.5 x 10^9 revolutions | Operating Temperature 0 ÷ 70°C | Pulses/Revolution 1 ÷ 90000 | Maximum Frequency 100 kHz

Power supply 5-30V DC | Shaft Ø9.52mm Stainless Steel | Weight 155g | Max RPM 6000 | Starting Torque 18 gcm | Bearing Life 1.5×10^9 revolutions | Impact Resistance 50G x 11ms | Operating Temperature 0-60°C | Pulses/Revolution 1-1024 PPR | Protection IP54/IP65

ORP probe by immersion in PVC tube. Length 720 mm. With SZ275 probe

CONDUCTIVE ELECTRODES

Dual Output | 4-20mA + AC Output | Configurable Speed Range | 2Hz-1kHz Frequency | 12-32V DC Power Supply | -25 to 90°C Temperature | IP67 Protection | Stainless Steel | Insulated Base | 3-pin Connector | 62GB