CSxx sensor-datalogger shielded cable
- Manufacturer: Nesa
- Category: NESA Accessories, Sensor accessories, SENSORS
The NESA CSxx is a shielded cable for connecting a sensor to a data logger, available in versions for standard sensors and for heated sensors. It features a 7-pin IP68 connector on the sensor side and ferrules on the data logger side; the CSxx and CSxx-S versions use a PS2 connector or ferrules.
It is constructed from a material with high thermal and mechanical resistance. References CS05 (5 m), CS10 (10 m), and CSxx (xx m) are available in a customized version (-S) and a heated version (R). In the heated versions, two wires of a larger cross-section (0.75 mm²) supply the heating element at low voltage, typically 12 Vdc.
Key points
- Shielded sensor-datalogger cable, for standard or heated sensors
- IP68 7-pole connector on the sensor side
- Pins on the datalogger side; in CSxx and CSxx-S, PS2 connector or pins
- Lengths of 5 m (CS05), 10 m (CS10) and xx m (CSxx)
- Heated versions CS05R, CS10R and CSxxR: 0.75mm² heating wires, normally 12 Vdc
- Usable with third-party acquisition systems, e.g. PLCs in industrial settings
Technical Frequently Asked Questions
What lengths and versions are available?
CS05 (5 m), CS10 (10 m) and CSxx (xx m), each in standard, customized (-S) and heated versions for heated sensors (R).
What connectors does it have?
A 7-pin IP68 connector on the sensor side and ferrules on the datalogger side. In CSxx and CSxx-S models, the datalogger side has a PS2 connector or ferrules.
What is the heated version like?
Use two wires of larger cross-section (0.75mm²) for low voltage heating, normally 12 Vdc, for heated sensors such as VV1R, DVR, PL400R and PL1000R.
Properties
| Feature | Specification |
|---|---|
| Cable and connectors | |
| Product type | Shielded sensor-datalogger cable |
| Connector on sensor side | IP68 7-pin connector |
| Datalogger end termination | Toe caps |
| Datalogger side in CSxx and CSxx-S | PS2 connector or pins |
| Material | High thermal and mechanical resistance |
| Use in third-party systems | Third-party acquisition systems (e.g. PLCs in industrial settings) |
| Versions and lengths | |
| Version for standard sensors | CS05, CS10 and CSxx |
| Customized version | CS05-S, CS10-S and CSxx-S |
| Version for heated sensors | CS05R, CS10R and CSxxR |
| CS05 Length | 5 m |
| CS10 Length | 10 m |
| Length of CSxx | xx m |
| Heating (R versions) | |
| Heating wires | 2, of larger section |
| Heating wire section | 0.75 mm² |
| Heating voltage | Normally 12 Vdc |
| Example heated sensors | VV1R, DVR, PL400R and PL1000R |
Pins and colors: standard sensors
| Pin | Color type 1 | Color type 2 | UTA-N | ANESB-B | All other sensors |
|---|---|---|---|---|---|
| 1 | Yellow | Black | Pt100 (I+) | Out (VV) | / |
| 2 | White | White | Pt100 (V+) | OUT (DV) | Out1(+) |
| 3 | Green | Green | Pt100 (V-) | Ground signal | Out1(-) |
| 4 | Gray / Orange | Gray / Orange | Gnd | Gnd power supply | Gnd |
| 5 | Red | Red | +Vdc (10÷30V) | +Vdc (10÷30V) | +Vdc (10÷30V) |
| 6 | Blue | Blue | RH (+) | — | Out2(+) |
| 7 | Brown | Brown | RH (-) | — | Out2(-) |
Pins and colors: heated sensors
| Pin | Color type 1 | Color type 2 | ANESBR-B | All other sensors |
|---|---|---|---|---|
| 1 | Yellow | Blue | Out (VV) | / |
| 2 | White | White | OUT (DV) | Out1(+) |
| 3 | Green | Green | Ground signal | Out1(-) |
| 4 | Gray / Orange | Gray / Orange | Gnd power supply | Gnd |
| 5 | Red | Brown | +Vdc (10÷30V) | +Vdc (10÷30V) |
| 6 | Red [0.75mm²] | Red [0.75mm²] | Heating (+) | Heating (+) |
| 7 | Black [0.75mm²] | Black [0.75mm²] | Heating (-) | Heating (-) |
| Reference | Configuration |
|---|---|
| CS05CS05 | Description: Shielded sensor-datalogger cable, with ferrules on the datalogger side and a 7-pin IP68 connector on the sensor side. Length: 5 m |
| CS05-SCS05S | Description: Custom shielded sensor-datalogger cable, with ferrules on the datalogger side and a connector on the sensor side. Length: 5 m |
| CS05RCS05R | Description: Heated shielded sensor-datalogger cable, with ferrules on the datalogger side and a 7-pin IP68 connector on the sensor side. Length: 5 m |
| CS10CS10 | Description: Shielded sensor-datalogger cable, with ferrules on the datalogger side and a 7-pin IP68 connector on the sensor side. Length: 10 m |
| CS10-SCS10S | Description: Custom shielded sensor-datalogger cable, with ferrules on the datalogger side and a connector on the sensor side. Length: 10 m |
| CS10RCS10R | Description: Heated shielded sensor-datalogger cable, with ferrules on the datalogger side and a 7-pin IP68 connector on the sensor side. Length: 10 m |
| CSxxCSxx | Description: Shielded sensor-datalogger cable, with PS/2 connector or ferrules on the datalogger side and a 7-pin IP68 connector on the sensor side. Length xx m |
| CSxx-SCSxxS | Description: Custom shielded sensor-datalogger cable, with PS/2 connector or ferrules on the datalogger side and a connector on the sensor side. Length xx m |
| CSxxRCSxxR | Description: Heated shielded sensor-datalogger cable, with ferrules on the datalogger side and a 7-pin IP68 connector on the sensor side. Length xx m |

Related documentation, cases, and guides
Other products








