B&C SZ161 pH Sensor
Budget-friendly price Request a quote
pH sensor for range 0 to 13pH with BNC connector Compatible with all controllers on the market
- Manufacturer: B&C Electronics
- Category: Water quality, SENSORS, pH and Redox Probes
B&C Electronics SZ161 pH sensor. Measurement range: 0 to 13 pH. Accuracy: ± 0.1 pH unit. Response time: < 10 seconds (95% response). Glass body with ring junction, 110 mm long and 12 mm in diameter.
Temperature: 0 to 100 °C. Maximum pressure: 10 bar. Connector: 1.5 m cable with BNC. Slope: 59 ± 3 mV/pH unit at 25 °C. Zero point: pH 7.
Applications: laboratory and wastewater treatment. Compatible with portable instruments and in-line or submersible measuring systems. Submersible installation with SZ860 or SZ880 fittings, lengths from 720 to 1170 mm.
Properties
- Measuring range: 0 to 13 pH
- Temperature range: 0 to 100 °C
- Body material: glass
- Maximum pressure: up to 10 bars
- Connector: 1.5m cable with BNC connector
- Dimensions: 110 mm in length and 12 mm in diameter
- Application: Laboratory measurement and wastewater treatment.
- Submersible installation: with SZ860 or SZ880 accessories, with lengths from 720 to 1170mm
- Curve: 59 ± 3 mV/pH unit at 25ºC (slope 168 to 183 mV)
- Zero Point: pH 7
- Displacement (asymmetry potential): 0 mV ± 25 mV
- Accuracy: ± 0.1 pH unit
- Response time: < 10 seconds (95% response)
- Stability: < 3 mV drift/24 hours
- Glass membrane impedance: < 300 Mohm at 25ºC
- Reference junction impedance: < 30 Kohm at 25ºC
- Operating temperature range: -5 to -100ºC
- Working pressure range: 150 psi at 25°C
- pH electrode solution: pH buffer with added chloride
- Reference type: Annular ceramic, sealed
- External reference electrode solution: Polysaccharide gel, 4M KCI with AgCI
- Alkalinity error: < 0.05 pH at pH 10 for 0.1M Na+
This sensor is suitable for applications in contaminated liquids, portable and laboratory instruments.
Related documentation, cases, and guides
Other products
Output ±10 VDC | Defined stroke 5 … 20 mm | Linearity ±0.1 … ±0.3 % | 24 VDC ±20 % | IP67 with EEM 30-70 connector
High-Durability Industrial Connectivity for Electrical and Data Transmission Range: 5 Meters in length with certified IP65 protection
Mounting feet | Stainless steel Ø10 shaft | 10 to 3600 pulses/rev | Max. frequency 180 kHz | NPN, open collector, push-pull | Power supply 5–24 V | IP52 shaft, IP64/IP65 output
Inductive toroidal conductivity probe with 4-20 mA output and RS485 Modbus RTU. Configurable ranges from 4 to 2,000 mS/cm and TDS up to 1,000 ppt.
Conductivity range from 0 to 20 mS/cm. Output 4/20mA
Analog voltage output | Shaft Ø 6 mm | 3 M4 threaded holes | Max. Ub 42 V | IP40 | 3, 5 or 10 turns
Ø58 mm, servo, Ø10 h8 shaft | Up to 30 bits in 16384 revolutions | SSI or SSI with preset (S1, S4) | RS422/RS485 line driver | 10–30 V power supply | IP64 shaft (IP66 sealed) | 800 kHz step frequency
Black platinum electrodes, K=1cm-1 (2 to 2,000mS) Diameter 12 and 110 lake, body material PVidrio and epoxy, temperature, up to 70ºC, BNC connector with 1.5m long cable
Inductive (Dual-Frequency) | 500 N·m – 4,000 N·m | Up to 40,000 RPM | PCD Flange 105.0 mm