Dual Resolution Incremental Encoder I/115K
- Manufacturer: ELCIS Encoder
- Category: Encoder, Incremental Encoder, Dual Resolution Incremental Encoder, SENSORS
In demanding industrial environments, the need for redundancy and precision in angular measurement is critical to avoid unplanned downtime. This transducer eliminates the dependence on a single signal channel, ensuring operational continuity in the event of isolated electronic failures in one of the two independent internal outputs.
The technical solution integrates two internal incremental encoders with fully galvanically isolated electronics. It supports up to 6000 continuous RPM and offers multiple output configurations, from push-pull to line driver, allowing flexible integration into existing control systems without compromising data integrity.
Constructed with an anodized aluminum base and lid for efficient heat dissipation, it features an 11mm diameter stainless steel shaft supporting radial loads of up to 15 kg. Its housing protects the internal components against dust and impacts, meeting standard IP65 or IP67 ratings (optional). guemisa.es.
- It integrates two internal incremental encoders with electronics that are fully galvanically isolated from each other.
- It supports up to 6000 continuous RPM with bearings with a lifespan of 1.5 x 10^9 turns.
- It features a stainless steel shaft Ø11mm supporting radial loads of up to 15 kg.
- It offers multiple output configurations from Push-Pull to 88C30 Line Driver.
Technical Frequently Asked Questions
How does the I/115K model differ from the base I/E6 series?
The I/115K integrates two independent, galvanically isolated internal encoders, whereas models like the I/E6 are typically single units. Furthermore, the 115K offers more versatile power supply configurations and native IP65 protection in the standard version, compared to IP67 or IP00 options in other formats within the ELCIS range.
What alignment precautions does the I/115K shaft require during installation?
The Ø11mm stainless steel shaft supports up to 15 kg of load, but it is vital to avoid angular misalignment that generates excessive bending moments. It is recommended to use flexible couplings to isolate external vibrations and to respect the starting torque limit of over 30 gcm to avoid damaging the sealed bearings.
What connectors and output options are available for the I/115K?
The electronics allow for NPN, PNP, Push-Pull PRO, or 88C30 line driver configurations, depending on system requirements. Additionally, IP65 single-connection adapters, terminal blocks, and special options such as shatterproof discs or sealed bearings are available upon request from the manufacturer, ELCIS.
Properties
| Feature | Specification |
|---|---|
| Sensor Type | Incremental Encoder |
| Main Application | Industrial Automation |
| Feeding | 5V ±5% / 8÷24V (depending on version) |
| Axis | Ø11mm Stainless Steel |
| Weight | 1500 g |
| Maximum Load | 15 kg (Radial/Axial) |
| Maximum RPM | 6000 RPM Continuous |
| Starting Torque | >30 gcm |
| Bearing Life | 1.5 x 10^9 Turns |
| Impact Resistance | 50G x 11ms |
| Vibration Resistance | 12 G (10 ÷ 2000 Hz) |
| Operating Temperature | 0 ÷ 70 °C |
| Pulses/Revolution | 1÷10000 + 1÷2540 |
| Maximum Frequency | 100 kHz (Option 300) |
| IP protection | IP65 Standard / IP67 Option |
| Light Source | LED >100,000 h Useful Life |
Other products
