B&C SZ1025 pH Sensor
Budget-friendly price Request a quote
Combined glass/gel reference pH electrode, epoxy body, 9m cable.
- Manufacturer: B&C Electronics
- Category: Water quality, SENSORS, pH and Redox Probes
B&C Electronics SZ1025 pH Sensor. Combined glass/gel reference electrode with epoxy body. Measurement range: 0 to 13 pH. Accuracy: ± 0.1 pH unit. Response time: < 10 seconds (95% response).
Temperature: 0 to 60 °C. Maximum pressure: 7 bar. Dimensions: 110 mm in length and 12 mm in diameter. Contains potassium chloride (KCl) solution and does not require electrolyte addition.
Application: swimming pools and spas.
Properties
- Measuring range: 0 to 13 pH
- Temperature range: 0 to 60 °C
- Body material: Epoxy
- Maximum pressure: up to 7 bars
- Connector: 1.5m cable with BNC connector
- Dimensions: 110 mm in length and 12 mm in diameter
- Application: Measurement in swimming pools and spas
- Zero Point: pH 7
- Accuracy: ± 0.1 pH unit
- Response time: < 10 seconds (95% response)
- pH electrode solution: pH buffer with added chloride
- Reference type: Annular ceramic, sealed
- External reference electrode solution: Polysaccharide gel, 4M KCI with AgCI
Related documentation, cases, and guides
Other products
Conductivity ranges from 10mS to 2,000mS 4/20mA output
Through-hole shaft Ø30–50 H7 | Ø170 h5, anti-rotation pin | 18000–90000 imp/rev | NPN, PNP, push-pull, driver, TTL | 5–30 V | IP65 shaft (IP66 sealed) | 100 kHz (500 kHz optional)
Incremental output | No rear overhang | 100 imp/revolution with latching | NPN, PNP, push-pull, driver | 5–28 V power supply depending on version | IP64 shaft side (IP00 terminals) | Phoenix MS terminals, axial output
LEVEL RELAYS FOR CONDUCTIVE LIQUIDS
Incremental output | Emergency stop, optional handle | 100 imp/revolution with latching | NPN, PNP, push-pull, driver | 5V or 8–28V power supply | IP64 shaft (IP65 output) | Optional enable push button
Wind speed sensor, industrial anemometer made of metal or carbon fiber, with different types of output signals
4 electrodes, K=1cm-1 (2 to 2,000mS) 1″ BSP thread, PVC body material, PT-100 for temperature measurement, up to 80ºC, 7pin connector
Thread Ø 0.51 mm | Stroke 750 or 1500 mm | Pot. 1 kΩ, 4–20 mA, 0–10 V, 0–5 V | Incremental option (I) | Supply 5, 12 or 24 V ±5 % | Linearity ±0.25 % fs | IP54