A/990FC Absolute Fieldbus Encoder

Budget-friendly price Request a quote
CANopen (C2) or fiber optic (CF) | Hollow shaft Ø10 H7, housing Ø90 | Internal star coupling | 16 bit; 30 bit in 16384 turns | 10–30 V DC | IP65 shaft (IP66 sealed)

The ELCIS 990FC (A/990FC) is a CANopen absolute encoder, single-turn and multi-turn, with a hollow shaft Ø10 and a housing Ø90. It has a patented internal star coupling (like the mod. 72).

The A/990FC is a single-turn or multi-turn absolute encoder with a CANopen/CAN (C2) or fiber optic CAN (CF) interface, a CAN transceiver (ISO 11898), and a transmission speed of up to 1 Mbaud. It allows selection of 4096, 8192, 16384, 32768, or 65536 steps per turn and 1, 4096, or 16384 turns, with a maximum of 30 bits in binary code, and two LEDs indicate the status.

Constructed with an aluminum housing and a hollow stainless steel shaft of Ø10 H7 (optional Ø9.52, Ø8, Ø6 or others upon request). It features IP65 protection on the shaft side (IP66 in the sealed version; output side depending on the connection), withstands impacts of 30 G and vibrations of 10 G, and operates from -40 to +85 °C with 98% humidity (non-liquid state).

  • Hollow shaft with internal star coupling and max. compensation of ±3 mm axial, ±0.05 mm radial and ±2° angular.
  • Interface CANopen / CAN either CAN fiber optic, with CAN transceiver (ISO 11898) up to 1 Mbaud.
  • Resolution of up to 16 bit per turn and 30 bit in 16384 turns.
  • Programmable parameters: cams, 2 limit switches, speed, baud rate and CAN identifier.

Technical Frequently Asked Questions

What compensation does the star coupling of the A/990FC allow?

According to the manufacturer, the maximum compensation of the coupling is ±3 mm axial, ±0.05 mm radial and ±2° angular.

What resolutions and laps can the A/990FC be configured for?

It allows you to choose 4096, 8192, 16384, 32768 or 65536 steps per revolution and 1, 4096 or 16384 revolutions, with a maximum resolution of 30 bits at 16384 revolutions.

What parameters are programmable in the CANopen interface and what connections are available?

Direction of rotation (complement), resolution per revolution, total resolution, preset value, cams, 2 limit switches, speed, baud rate, and CAN identifier; transmission mode: polled, cyclic, sync, or cos. The CAN fiber optic (CF) version is the same as the (C2) but with a fiber optic connection. Connections: 3 IP65 cable glands (3PG), 3 IP65 cable glands with LED (3PG-D), 2 IP65 cable glands Ø 9–13 mm (2M20), 5-pin IP65 round connector (1BW), two 5-pin IP65 round connectors (2BW), and fiber optic connector (1HW).

Properties

FeatureSpecification
Mechanics
HousingAluminum · Ø90 mm (customizable upon request)
WeightSingle turn 1400 g · multi-turn 1500 g
AxisHollow Ø10 H7, stainless steel. (op. Ø9.52, Ø8, Ø6 or others)
Maximum continuous RPM / starting torqueStandard: 5000 rpm • 65 gcm. Sealing: 2500 rpm • 115 gcm (intermittent: +30%)
bearing life>10⁵ h at 1000 rpm
Electric
Shaft/outlet protectionIP65 shaft (IP66 sealed) · output according to connection
Power supply / max. consumption.10–30 V DC · 2.5 W
Light / sensors / LSB frequencyLED (life ≥ 100,000 h) · IR photodiodes · 800 kHz
Division accuracy±½ LSB (<13 bit) ±2 LSB (13–16 bit)
Max resolution.16 bit/turn · 30 bits in 16384 turns · Binary code
Steps per lap / number of laps4096 to 65536 steps/turn · 1, 4096 or 16384 turns
InterfaceCANopen / CAN (C2) · CAN fiber optic (CF) · max. 1 Mbaud
Protection and environment
Impact/vibration resistance30 G (11 ms) 10 G (10–1000 Hz)
Operating/storage temperature-40 … +85 °C / -40 … +85 °C
Humidity98 % (without liquid state)
ReferenceConfiguration
A/990FC-12-12-10-B-C2-0-3PGA990FC121210BC203PG4096 steps/rev. · revolutions: 4096 · shaft Ø10 mm · Binary · CANopen / CAN · 3 cable glands · IP65
Other combinations of resolution, power supply, electronics and connection are available upon request: please contact us and we will confirm the exact reference.
ELCIS A/990FC absolute fieldbus encoder
Dimensional drawing of the ELCIS A/990FC absolute fieldbus encoder

Related documentation, cases, and guides

Other products

Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Square flange □63.5, shaft Ø9.52 h7 | Up to 8192 steps (13 bits) | Parallel, SSI or analog (mA or V) | 5, 15, 8–24, 18–28 or 10–30 V | IP65 shaft (IP66 sealed) | Gray, Binary, Excess or BCD
NESA Environmental Meters
Heavy | Liquid, solid, and mixed precipitation | 200/400 cm² | 1500 mm | 0.1% fs | 0–2 Vdc, 4–20 mA, RS485 / Modbus RTU | 10–28 Vdc
DPF Sensors logo
HIGH temperature transducer
LVDT Manufacturer Logo Schreiber Messtechnik
Angular and Rotational Sensor | 1 to 64 Rotations | Metal Housing Ø 22 mm | IP68 | Analog and SSI Output | Floating Shaft or Magnet
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Wire diameter 0.51 mm | Stroke 500, 750, 1000 or 1250 mm | Potentiometric output (divider) | Potentiometer 1 kΩ | Linearity ±0.25 % fs | IP50 potentiometer (IP54 mechanical) | Connection length 1 to 5 m
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Dual shaft Ø6 mm, servo flange | Front centering Ø31.75 h7 | 1 to 10000 imp/v | NPN, PNP, push-pull or line driver | 5–30 V | IP64 shaft (IP65 sealed) | 100 kHz (300 kHz optional)
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Through shaft Ø6, 8, 10, 12 or 15 mm | Housing Ø59 mm | 1 to 3600 imp/rev | NPN, PNP, push-pull, driver, 1 Vpp | Power supply 5–30 V | IP64 shaft (IP65 Z-seal) | Anti-rotation pin Ø5 mm
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Low profile Ø68 mm | Servo clamp mounting | Ø6 h7 stainless steel shaft | 1 to 10000 pulses/revolution | NPN, PNP, push-pull, driver, TTL | 5–30 V power supply | IP64 shaft, IP66 seal
LVDT Manufacturer Logo Schreiber Messtechnik
Magnetostrictive Transducer | Ranges up to 1500mm | Outputs 4-20mA, ±10V | Pressure 300 bar (optional 600) | Accuracy 0.1% | Integrated Electronics
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Hollow shaft Ø6, 8, 9.52 or 10 mm | Housing Ø72 mm | 1 to 25000 imp/revolution | NPN, PNP, push-pull, driver, 1 Vpp | Power supply 5–30 V | IP64 shaft (IP66 sealed Z) | Star-shaped, compensates ±3 mm axial
Shopping Basket