Monitran MTN/2285 4-20 mA Vibration Speed Transmitter

Budget-friendly price Request a quote
4-20 mA proportional to RMS speed | Two-wire for PLC, DCS and controllers | 12-32 V DC | 2 Hz to 1 kHz ±10% | Faraday cage electronics | Stainless steel | IP67 (IP68 on 2285W, IP65 on 2285STC)

The Monitran MTN/2285 is a general-purpose speed transducer with a standard industrial 4-20 mA two-wire output, proportional to the RMS speed (mm/s) and sensor range, which connects directly to PLCs, DCSs, and other industrial controllers. It is powered by 12-32 V DC, has a frequency response of 2 Hz to 1 kHz ±10%, and a transient sensitivity of less than 5%. The internal electronics are housed in a Faraday cage and isolated from the body to minimize noise.

La serie se compone de seis variantes con carcasa de acero inoxidable: MTN/2285-2P (conector MS de 2 pines), MTN/2285-4P y MTN/2285-4PZ (conector M12 de 4 pines; cambian los pines de la señal), MTN/2285C (cable integral ETFE con sobretrenzado de acero inoxidable), MTN/2285W (sumergible, IP68, cable integral de poliuretano) y MTN/2285STC (salida lateral con salida de temperatura de 10 mV/°C, IP65). Guemisa es distribuidor oficial de Monitran en España.

Key points

  • 4-20 mA output proportional to RMS speed, with optional speeds of 0-10, 0-20, 0-25, 0-50 and 0-100 mm/s
  • Dynamic range of 50 g peak, temperature sensitivity of 0.08%/°C and operating temperature of -25 to 90 °C
  • Seis variantes: conector MS de 2 pines, conector M12 de 4 pines (4P y 4PZ), cable integral, sumergible IP68 (5 m máx., 0,5 bar) y STC con salida de temperatura de 10 mV/°C

Technical Frequently Asked Questions

What output does the Monitran MTN/2285 have and what speeds does it support?

4-20 mA DC two-wire output proportional to the rms speed (mm/s) and the sensor range, with optional speeds of 0-10, 0-20, 0-25, 0-50 and 0-100 mm/s, powered by 12-32 V DC.

Which variant of the MTN/2285 can be submerged?

El MTN/2285W: sellado IP68, cable integral de poliuretano de hasta 100 m y profundidad de inmersión de 5 m máx. (0,5 bar). El resto son IP67 (MTN/2285-2P, -4P, -4PZ y C) o IP65 (MTN/2285STC).

Which variant also measures temperature?

The MTN/2285STC, with side output: in addition to the 4-20 mA output proportional to the RMS speed, it delivers a temperature output of 10 mV/°C; its frequency response is 2 Hz to 800 Hz ±10%.

Properties

FeatureSpecification
Measure and signal
Exit4-20 mA DC proportional to the rms speed (mm/s), two-wire
Measurement ranges0-10, 0-20, 0-25, 0-50 and 0-100 mm/s rms (optional speed xx)
Temperature output (MTN/2285STC)10 mV/°C
Frequency response2 Hz to 1 kHz ±10% (MTN/2285STC: 2 Hz to 800 Hz ±10%)
Mounted base resonance5 kHz (nominal) (MTN/2285-2P, MTN/2285W y MTN/2285STC); 18 kHz (nominal) (MTN/2285-4P, MTN/2285-4PZ y MTN/2285C)
Dynamic range50g peak
Cross-sectional sensitivityLess than 5%
Temperature sensitivity0.08%/°C
IsolationElectronics in a Faraday cage, isolated from the body
Food and environment
Feeding12-32 V DC (4-20 mA)
Operating temperature-25 to 90 °C
SealedIP67 (MTN/2285-2P, MTN/2285-4P, MTN/2285-4PZ y MTN/2285C); IP68 (MTN/2285W); IP65 (MTN/2285STC)
Immersion depth (MTN/2285W)5 m max. (0.5 bar)
Housing materialStainless steel
Mechanics and connection
Connection (MTN/2285-2P)2-pin MS connector; MTN/MH002 mating connector
Connection (MTN/2285-4P)Conector M12 de 4 pines (pin 2 velocidad +, pin 4 velocidad −); conector de acoplamiento MTN/MH008
Conexión (MTN/2285-4PZ)Conector M12 de 4 pines (pin 1 velocidad +, pin 3 velocidad −); conector de acoplamiento MTN/MH008
Connection (MTN/2285C)ETFE integral cable with stainless steel overbraiding; standard length 5 m, maximum 100 m
Connection (MTN/2285W)Integral polyurethane cable, length to be specified in the order; maximum length 100 m
Connection (MTN/2285STC)ETFE integral cable with stainless steel overbraiding, length to be specified in the order; standard length 5 m, maximum 100 m
Mounting¼" UNF female or Q/F female (MTN/2285STC: ¼" UNF female, M6 x 35 mm or M8 x 28 mm)
Tightening torque8 Nm
Dimensions (according to plan)Ø27,0 mm; 28 mm entre caras; alto 57,0 mm (MTN/2285-2P, MTN/2285-4P y MTN/2285-4PZ), 43,0 mm (MTN/2285C, sin cable), 75,0 mm (MTN/2285W, sin cable)
Weight140 g (MTN/2285-2P, MTN/2285-4P, MTN/2285-4PZ y MTN/2285C); 150 g (MTN/2285W); 440 g (MTN/2285STC) (nominal)
ReferenceConfiguration
MTN/2285-2P-xx MTN22852PXXVariant: MTN/2285-2P · Mounting: ¼" UNF female · xx = optional speed (0-10, 0-20, 0-25, 0-50 or 0-100 mm/s rms) · 2-pin MS connector
MTN/2285-4P-xx MTN22854PXXVariant: MTN/2285-4P · Mounting: ¼" UNF female · xx = optional speed (0-10, 0-20, 0-25, 0-50 or 0-100 mm/s rms) · 4-pin M12 connector
MTN/2285-4PZ-xx MTN22854PZXXVariante: MTN/2285-4PZ · Montaje: ¼" UNF hembra · xx = velocidad opcional (0-10, 0-20, 0-25, 0-50 o 0-100 mm/s rms) · Conector M12 de 4 pines (pin 1 +, pin 3 −)
MTN/2285C-xx MTN2285CXXVariant: MTN/2285C · Mounting: ¼" UNF female · xx = optional speed (0-10, 0-20, 0-25, 0-50 or 0-100 mm/s rms) · Integral ETFE cable
MTN/2285CQ-xx MTN2285CQXXVariant: MTN/2285C · Mounting: Q/F female · xx = optional speed (0-10, 0-20, 0-25, 0-50 or 0-100 mm/s rms) · Integral ETFE cable
MTN/2285Q-2P-xx MTN2285Q2PXXVariant: MTN/2285-2P · Mounting: Q/F female · xx = optional speed (0-10, 0-20, 0-25, 0-50 or 0-100 mm/s rms) · 2-pin MS connector
MTN/2285Q-4P-xx MTN2285Q4PXXVariant: MTN/2285-4P · Mounting: Q/F female · xx = optional speed (0-10, 0-20, 0-25, 0-50 or 0-100 mm/s rms) · 4-pin M12 connector
MTN/2285Q-4PZ-xx MTN2285Q4PZXXVariante: MTN/2285-4PZ · Montaje: Q/F hembra · xx = velocidad opcional (0-10, 0-20, 0-25, 0-50 o 0-100 mm/s rms) · Conector M12 de 4 pines (pin 1 +, pin 3 −)
MTN/2285STC-xx MTN2285STCXXVariant: MTN/2285STC · Mounting: ¼" UNF female · xx = optional speed (0-10, 0-20, 0-25, 0-50 or 0-100 mm/s rms) · Integral ETFE cable
MTN/2285W-xx MTN2285WXXVariant: MTN/2285W · Mounting: ¼" UNF female · xx = optional speed (0-10, 0-20, 0-25, 0-50 or 0-100 mm/s rms) · Integral polyurethane cable
MTN/2285WQ-xx MTN2285WQXXVariant: MTN/2285W · Mounting: Q/F female · xx = optional speed (0-10, 0-20, 0-25, 0-50 or 0-100 mm/s rms) · Integral polyurethane cable
Monitran MTN/2285 4-20 mA Vibration Speed Transmitter
Dimensions and pin connection of the Monitran MTN/2285-2P speed transmitter

Other products

DPF Sensors logo
Tilt sensor for platform control, on 1 or 2 axes, programmable alarm range, range +-15º, accuracy 0.1º, 1Amp contact, NC or NO, 24 VDC power supply, IP67
Official logo of Novotechnik, manufacturer of linear sensors, position transducers, and industrial encoders
Magnetostrictive, non-contact | CAN SAE J1939 | Stroke 50 … 2000 mm | Linearity ≤ ±0.04 % FS (min. 300 µm) | Resolution ≤ 0.1 mm | 12/24 VDC (8 … 34 VDC) | 350 bar · IP67
DPF Sensors logo
Combined humidity and temperature sensor, high quality sensor, duct and outdoor.
ATESTEO LOGO, manufacturer of torque sensors
Inductive (Dual-Frequency) | 1,000 – 3,000 N·m | 16,000 RPM | PCD Flange 130.0 mm
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Housing Ø65, shaft Ø10 h7 | Up to 8192 steps (13 bits) | Parallel, SSI or analog (mA or V) | 5, 15, 8–24, 18–28 or 10–30 V | IP65 shaft (IP66 sealed) | Gray, Binary, Excess or BCD
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
B10 flange Ø115, shaft Ø11 h7 | SSI with preset, RS422 | Up to 65536 steps (16 bits) | Gray or binary programmable | 10–30 V | IP64 shaft (IP66 sealed) | Optional Sin/Cos 1024 or RS422 16384 ppr
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Housing Ø59 mm | Shaft Ø6 h7 stainless steel | 1 to 25000 pulses/revolution | NPN, PNP, push-pull, driver, TTL | Power supply 5–30 V | IP64 shaft, IP65 output | 100 kHz (300 kHz optional)
DPF Sensors logo
HIGH PRECISION RANGE ±1…90º, 2 axes, output signal 4-20mA / 0-5 Vdc / Rs485 / CanBus, PRECISION: ±0.005º, RESOLUTION: 0.001º
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Incremental output | Square flange □45 mm | 100 imp/revolution with latching | 1–2500 imp/revolution (option F) | NPN, PNP, push-pull, driver | 5 V or 8–28 V depending on version | IP64 shaft side (IP65 cable)
Shopping Basket