SZ3271 CONDUCTIVITY SENSOR

Graphite Sensor, 1.5m Cable with BNC connector, K=1cm Range from 2MicroSiemens to 2,000 milliSiemens,

Manufacturer: B&C Electronics
Category: Water quality, SENSORS, Conductivity Sensors

The B&C Electronics SZ3271 Graphite Electrical Conductivity Sensor is a conductivity transmitter designed to measure electrical conductivity in a wide variety of agricultural and industrial processes.

It is capable of operating up to 80 °C and 10 bar pressure, with a measurement range of 2µS to 2,000 mS.

It is equipped with concentric graphite electrodes on a flat surface and has a cell constant K=1 cm⁻¹. Its plastic body measures 110 mm in length and 12 mm in diameter and includes a 1.5 m cable with BNC connector.

By using graphite electrodes, polarization problems are minimized and measurement stability is ensured.

It is specially designed for applications such as: Monitoring of fertigation systems, hydroponic crops, greenhouses, quality control in industrial processes, analysis in water and soil laboratories.

Properties

Measuring range:	K=1 cm^-1 (2 µS to 2,000 mS)
Body material:	Strong plastic
Electrodes:	2 graphite electrodes in concentric configuration
Size:	110mm and diameter 12
Maximum working temperature:	80ºC
Electrical connection:	BNC connector with 1.5m cable
Maximum working pressure	10Bar

Other products

PROFINET Interface for Dimetix Sensors: Leading Industrial Solution

High-Speed Communication (500 Hz / 2 ms) with IP65 Industrial Protection: Synchronous Real-Time Data Transfer for Critical Processes

Communication, Signal converters, Displacement, INSTRUMENTATION, Laser distance sensor, SENSORS, Level Sensors, Level sensors for solids

H10PT

Soil moisture sensor

SENSORS, Humidity Sensors

I/63SC – “Servo-Mount” Incremental Encoder

I/63SC – Incremental Encoder Ø 63 mm, “servo-mount” for direct coupling, configurable resolution up to 25000 ppi

Encoder, Incremental Encoder, Normal Incremental Encoder, SENSORS

I/80 Robust Incremental Encoder

I/80 – Incremental Encoder Ø 80 mm, solid shaft Ø 10 mm or Ø 12 mm, robust metal body, resolution up to 25000 dpi

Encoder, Incremental Encoder, Robust Incremental Encoder, SENSORS

B&C Conductivity Sensor SZ3350.1

Conductivity sensor, CLAMP connection, K range = 0.1, temperature range -5 to 85ºC

Water quality, SENSORS, Conductivity Sensors

I/55 Standard Incremental Encoder

I/55 – Standard Incremental Encoder, Shaft Ø 6×10 mm, Body: Ø 55×56 mm, Pulse range: 1 to 2,540

Encoder, Incremental Encoder, Normal Incremental Encoder, SENSORS

I/58S Incremental Encoder “Servo-Mount”

I/58S – Incremental Encoder “Servo-Mount” Ø 58 mm, Shaft Ø 6X10 mm, Body: Ø 58×69 mm, Pulse range: 1 to 25,000

Encoder, Incremental Encoder, Normal Incremental Encoder, SENSORS

I-38S Miniature Incremental Encoder

I/38S Miniature Incremental Encoder, shaft diameter 6.35×10, housing diameter ø 38×45.5, Pulse range: 1÷2540

Encoder, Incremental Encoder, Miniature Incremental Encoder, SENSORS

xPT-xxx

Wall-mounted temperature sensors for indoor or outdoor use, with Pt100, 4-20 mA, 0-10 Vdc signal, with or without display

SENSORS, Temperature sensors, Temperature sensors for air conditioning

SMX

ATEX pressure transducer

Pressure, SENSORS