SZ3252 CONDUCTIVITY SENSOR
Black platinum electrodes, K=1cm-1 (2 to 2,000mS) Diameter 12 and 110 lake, body material PVidrio and epoxy, temperature, up to 70ºC, BNC connector with 1.5m long cable
- Manufacturer: B&C Electronics
- Category: Water quality, SENSORS, Conductivity Sensors
The B&C Electronics SZ3252 Conductivity Sensor is a conductivity cell designed to measure electrical conductivity in a wide variety of industrial processes.
The electrical conductivity sensor works using the principle of measuring the electrical conductivity of a solution, which is directly related to the concentration of ions in the liquid.
The sensor uses two black platinum electrodes that are immersed in the solution. An alternating current is applied between the electrodes to avoid polarization processes that could alter the measurement. The ions present in the solution conduct the electric current between the electrodes, and this ability to conduct current is proportional to the ionic concentration of the solution.
Properties
| Technical Features B&C Electronics Conductivity Sensor | |
| Cell constant | K=1 cm-1 (2 µS to 2,000 mS) |
| Body material | Epoxy and Glass |
| Electrodes | Black Platinum |
| Size | 110mm and diameter 12 |
| Maximum working temperature | 70ºC |
| Electrical connection | BNC connector with 1.5m cable |
| Maximum working pressure | 3Bar |
Other products
CONDUCTIVE ELECTRODES WITH BUILT-IN AMPLIFIER
4 electrodes, K=1cm-1 (2 to 2,000mS) 1″ BSP thread, PVC body material, PT-100 for temperature measurement, up to 80ºC, 7pin connector
CONDUCTIVE ELECTRODES WITH BUILT-IN AMPLIFIER
Conductivity sensor, range K=0.1, working temperature 85ºC
Wire displacement sensor, ranges from 4000 mm to 20000 mm, with output signal in 5 Kohm resistance, 0-5 / 10 Vdc, 4-20 mA, RS485 or pulses, option with IP67 environmental protection
SI 31012 conductivity probe (4 electrodes) with Pt100 – DN40 DIN 11851-52 – 5 m cable
Distance and Positioning Control (50 m / ±5 mm / -10…+50ºC / 10 Hz)