Incremental Encoder Kit and Low Cost I/56CJ
- Manufacturer: ELCIS Encoder
- Category: Encoder, Incremental Encoder, Incremental Encoder Kit Low Cost, SENSORS
This low-cost Incremental Encoder Kit I/56CJ solves the problem of expensive sensors in industrial applications where budget is limited but reliability cannot be compromised. The patented design allows direct coupling to the motor shaft without the need for complex external adapters.
The technical solution integrates a composite base and Valox 420 cover to withstand harsh environments. It supports up to 6000 continuous RPM with a starting torque of 15 gcm, ensuring accurate position detection without sacrificing mechanical durability.
The construction uses sealed bearings with a lifespan of 1.5 x 10^9 revolutions and an impact resistance of 50 G. Available by special order in guemisa.es.
- Patented coupling for hollow shaft integrated into the motor.
- Composite base and Valox 420 lid guarantee industrial robustness.
- Impact resistance of 50G and vibration resistance of 12G.
- Bearing life of 1.5 x 10^9 turns.
Technical Frequently Asked Questions
How does the I/56CJ model differ from the I/E6?
The I/56CJ model differs from the I/E6 primarily in its patented hollow shaft and composite base instead of cast aluminum. The 56CJ offers a starting torque of 15 gcm and a bearing life of 1.5 x 10^9 revolutions, optimized for reduced costs.
What alignment precautions are required for the hollow shaft of the I/56CJ?
For the installation of the Ø4÷10 hollow shaft, it is crucial to ensure that the patented coupling has no excessive lateral play. The maximum permissible radial load is 1 kg, and the vibration resistance is 12 G between 10 and 2000 Hz during normal operation.
What connectors and output options are available for the I/56CJ?
Output options include open collector NPN, Push-Pull PRO, and 88C30 line driver for demanding industrial applications. Available connectors range from terminal blocks to IP65-rated cable end connectors, depending on the selected configuration.
Properties
| Feature | Specification |
|---|---|
| Sensor Type | Incremental |
| Main Application | Engines / Low Cost |
| Base and Lid Materials | Composite Material / Valox 420 |
| Total Weight | 95 g |
| Axle Type | Hollow Stainless Steel Ø4÷10 |
| Maximum Radial Load | 1 kg |
| IP Protection (Axis Side) | 65 (Sealed) |
| Maximum Continuous RPM | 6000 rpm |
| Starting Torque | 15 gcm |
| Bearing Life | 1.5 x 10^9 turns |
| Impact Resistance | 50 G x 11ms |
| Vibration Resistance | 12 G (10 ÷ 2000 Hz) |
| Operating Temperature | 0 ÷ 60 °C |
| Pulses for Revolution | 1 ÷ 1024 PPR |
| Maximum Frequency | 60 kHz |
Other products
