Travel switches
SCROLL SWITCH
- Category: SENSORS, Level Sensors, Level sensors for solids
Control of high level in products that form slopes during silo loading. For installation on silo roof
Properties
Suitable for controlling high level in products that form slopes during silo loading.
They also control flows and obstructions in pipes, screw conveyors, chain conveyors, etc.
The sensor probe must be exposed to the material to be detected. The thrust exerted by the material forces the probe to move back, triggering a switch that must be connected to the control systems to stop or start the signaling and transport mechanisms.
Other products
Illuminance sensor, lux meter, measuring range: 0-2000lux / 0-20klux / 0-200klux
Power supply 5V ±5% | Shaft Ø 10mm Stainless Steel | Weight 1300 g | Push-Pull Output | IP65 Protection | Maximum RPM 6000 | Starting Torque 18 gcm | Bearing Life 1.5 x 10^9 rev | Impact Resistance 50 G | ATEX Certification Ex d II C T6/T5
Power supply 5V | Shaft Ø10mm Stainless Steel | Weight 600g | Protection IP65 | Bearing life 1.5×10^9 revs | Max RPM 3000 | Starting torque 18 gcm | Temperature 0-70°C | Pulses/rev 25000 | Frequency 100kHz
Miniature size wire displacement sensor, ranges from 100 to 350 mm
Power supply 5-30V | Shaft Ø8mm Stainless Steel | Weight 380g | Bearing life 1.5×10^9 rev | Impact resistance 50G | Vibration resistance 12G | Operating temperature 0-70°C | Pulses/Rev 1-1000 | Max frequency 40kHz | IP64 rating
4-20mA DC Output | Range 0-10 to 0-100 mm/s | RMS Speed Measurement | Frequency 2Hz-1kHz | Power Supply 12-32V DC | Temperature -25 to 90°C | IP67 Protection | Stainless Steel | Insulated Base | Configurable Connection
Incremental Encoder for Motors I/59P | Anodized Aluminum Body | Valox 420 Cover | Hollow Shaft Ø 6–10 mm | Maximum Load 6 kg | IP65/IP66 Protection | Continuous RPM 3000 | Starting Torque > 50 g·cm | Bearing Life 1.5 x 10⁹ revs | Temperature 0–70 °C
Produal RTX environment transmitter for temperature, humidity, CO₂, VOCs, and PIR presence. Outputs: 0-10 V, Modbus RTU, BACnet MS/TP, and P/PI control for HVAC and BMS
145 g | 10 mm Stainless Steel Shaft | 5-30V Power Supply | IP65 Shaft Side | 6000 RPM Continuous | Starting Torque 18 gcm | Bearing Life 1.5 × 10⁹ revolutions | Impact Resistance 50 g | Operating Temperature 0-60°C | NPN/Push-Pull Output