Incremental Encoder for I/48 Motors

Budget-friendly price Request a quote
Hollow shaft Ø4–8 mm | Housing Ø48 mm | 1 to 2540 imp/rev | NPN, PNP, push-pull, line driver | Power supply 5–30 V | IP64 shaft (IP66 Z-seal) | Helical, optional flanges

The ELCIS 48 (I/48) is a miniature incremental encoder with a diameter of 48 mm, internal helical coupling, and a pulse rate of 1 to 2540 pulses per revolution. It allows for alignment of the electrical zero with the mechanical zero and accepts different flanges as an option.

The maximum compensation of the coupling is axial ±0.2 mm, radial ±0.05 mm and angular ±2°. The base and cover are made of anodized aluminum and the hollow shaft, made of Ergal, from Ø4 to Ø8 mm; the weight is 180 g.

It offers 1 to 2540 pulses per revolution with a maximum frequency of 60 kHz (75 or 100 kHz with the R and V options) and a 5–30 VDC power supply. The shaft side is IP64 as standard and IP66 with a sealed bearing (Z option, 3000 rpm max. continuous); the output side depends on the connection. The cable exits axially or radially.

  • Internal helical coupling: max. axial compensation ±0.2 mm, radial ±0.05 mm and angular ±2°.
  • Zero alignment: allows aligning the electrical zero with the mechanical zero.
  • Hollow Ergal shaft: Ø4, Ø6 or Ø8 mm; other diameters available upon request.
  • Max. frequency 60 kHz: 75 kHz with option R and 100 kHz with option V.

Technical Frequently Asked Questions

What type of coupling does the I/48 model integrate?

An internal helical coupling, with max. axial compensation ±0.2 mm, radial compensation ±0.05 mm and angular compensation ±2°.

What hollow shaft diameters does the I/48 encoder support?

Ø4, Ø6 and Ø8 mm, in Ergal; other diameters available upon request.

What is the weight of the I/48 encoder?

180 g. The base and lid are made of anodized aluminum.

Properties

FeatureSpecification
Mechanics
HousingAnodized aluminum (base and lid)
Weight180 g
AxisHollow shaft Ø4÷8 mm in Ergal (customizable upon request)
max. axial/radial load.1 kg
Bearing life1.5 × 10⁹ revolutions
Electric
Exit-side protectionAccording to connection: IP65 (see technical specifications)
Feeding5÷30 Vcc (see technical specifications)
Max. consumption.120 mA (standard) / 180 mA (line driver) (customizable upon request)
Impulses per lap1 to 2540
Max frequency.60 kHz (75 or 100 kHz optional)
Protection and environment
axle-side protectionIP64 standard / IP66 sealed (option Z)
max. continuous RPM6000 rpm (standard) / 3000 rpm (option Z) (max. intermittent rpm: +30 % of the max. continuous rpm)
Impact resistance50 G × 11 ms
Vibration resistance12 G (10 ÷ 2000 Hz)
Operating temperature0 … +70 °C (customizable upon request)
ReferenceConfiguration
I/X486-100-1828-BZ-B-CV-R-01IX4861001828BZBCVR01Custom options · 6 mm diameter shaft · 100 pulses/revolution · 18 ÷ 28 V · Bidirectional with zero · Push-pull pro · Cable · Radial output
I/X486-100-1828-BZ-B-CV-R-02IX4861001828BZBCVR02Custom options · 6 mm diameter shaft · 100 pulses/revolution · 18 ÷ 28 V · Bidirectional with zero · Push-pull pro · Cable · Radial output
Incremental encoder for ELCIS I/48 motors
Dimensional drawing of the incremental encoder for ELCIS I/48 motors

Related documentation, cases, and guides

Other products

Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Ø12 mm shaft with keyway | Ø90 mm housing | 1 to 90000 imp/v | NPN, PNP, push-pull, line driver | 5–30 V | IP65 shaft (IP66 with Z option) | 100 kHz (300 kHz optional)
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Contactless, 45×45 mm housing | Hollow shaft Ø4–10 mm with magnet | 8 to 2048 bpm/rotation | Line driver 26LS31/ET7272, NPN | Power supply 5, 8–24, 18–28, 10–30, 5–30 V | IP67 shaft | 30000 rpm, 600 kHz
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Wire diameter 0.51 mm | Stroke 1000, 1500 or 2000 mm | Potentiometric output (divider) | Potentiometer 1 kΩ | Linearity ±0.25 % fs | IP50 potentiometer (IP54 mechanical) | Connection length 1 to 5 m
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Through shaft Ø75, 90, 100, 110, 125 | Housing Ø250 mm | 400, 420 … 2304 impedances/revolution | NPN, PNP, push-pull, line driver | Power supply 5–30 V | IP54 shaft side | Internal tangential coupling
AIVIM logo
ATEX Certification | Electrochemical Technology | Titanium and Zinc | RS485 Modbus and 4-20mA
ATESTEO LOGO, manufacturer of torque sensors
Light Telemetry | 20,000 N·m | Structural Limit 13,000 RPM | PCD Flange 218.0 mm | Inertia 0.1485 kg·m²
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Incremental output | 32-pole input (SM/AM heads) | II 2 G Ex d IIC T6 / T5 | D Ex tD A21 IP66 T85°C / T100°C | 1024 imp, 300 kHz max. | 5 V or 30 V line driver output | 5, 10–30 or 10–30/5 V power supply
DPF Sensors logo
Resistive linear position sensor with spring probe • up to 200 mm • ±0.1 % FS
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Absolute, wire Ø 1.35 mm | Stroke 40, 50 or 60 m | Resolution 0.1 or 1 mm | PROFIBUS-DP Class 2 | 10–30 V DC | IP64 (IP65 connection covers) | Linearity ±0.05 % fs.
Monitran-Logo
IEPE: isolated AC output 100 mV/g ±10% | 2Hz to 10kHz ±5% | Base mounted resonance 18 kHz | Ex ia IIC T4/T6 Ga · Ex ia IIIC T135/T85 °C Da | Ui 28 V · Ii 93 mA · Pi 0.65 W | Constant current 0.5 to 8 mA, 12 V DC | Stainless steel, IP67 (IW and ISW: IP68)
Shopping Basket