SSA Road Condition Sensor

Budget-friendly price Request a quote
RS485 | Water film 0–4 mm | Dry / Damp / Wet / Ice / Snow | IP68 | -30–+70°C | 120 x 50 mm

The NESA SSA is a walk-through sensor for measuring the physical and chemical characteristics of the road surface. It allows for determining the condition of the road surface and distinguishes between dry, damp, wet, icy, snowy, and salty conditions, in addition to measuring temperature and assessing critical moisture levels.

Its operating principle is based on the variation of electrical conductivity, detected with a series of precision electrodes. It has a temperature measurement range of -30 to +70°C and a water film thickness of 0 to 4 mm, with an RS485 digital output.

Key points

  • Temperature measurement range -30 ÷ +70°C; water film 0÷4mm
  • Sensitivity and resolution 0.1mm
  • Freezing point curves 1÷10 (NaCl, CaCl, MgCl) from -20 ÷ 0°C, max. error ±1°C
  • RS485 digital output; 12÷24Vdc power supply, <8mA@12Vdc
  • IP68; operating temperature -40 ÷ +70°C, 0 ÷ 100%RH
  • Metal casing and reinforced, walkable ABS body; 120 x 50 mm; 0.8 kg

Technical Frequently Asked Questions

What does the SSA measure?

The physical-chemical characteristics of the road surface: temperature, water film of 0 to 4 mm and pavement condition (dry, damp, wet, ice, snow, residual salt).

What is their measure based on?

In the variation of electrical conductivity induced by the physical phenomena present on the measurement surface, detected with a series of precision electrodes.

What's the way out?

Digital RS485.

Properties

FeatureSpecification
Measurement and operating principle
Measurement principleVariation of electrical conductivity induced by physical phenomena present on the sensor's measuring surface; a series of precision electrodes detects the conductivity
Temperature measurement field-30 to +70°C
Water film measurement range0÷4mm
Sensitivity and resolution0.1mm
Freezing point curves1÷10 (NaCl, CaCl, MgCl) from -20 ÷ 0°C, max. error ±1°C
Temperature accuracy0.2÷0.5°C
Water film accuracy0.1 mm + 20% of the measured value
Ability to recognizeTemperature, dry, wet, humid, critical humidity, ice, snow, residual salt
Regulatory complianceEC
Exit sign
Exit signDigital RS485
Power supply, environment, and mechanical data
Feeding12÷24Vdc
Consumption<8mA@12Vdc
Operating temperature-40 to +70°C
Operating humidity0 ÷ 100%Rh
Degree of protectionIP68
MaterialMetal housing and sensor body in reinforced, walkable ABS
Dimensions120 x 50 mm
Weight0.8kg
ReferenceConfiguration
SSASSAOutput: RS485 · Description: Passive road surface condition sensor with isolated RS485 interface
NESA SSA Pavement and Road Surface Condition Sensor
Dimensions and connections of the NESA SSA road surface sensor

Other products

Monitran-Logo
4-20 mA proportional to rms acceleration (g rms) | Two wires for PLC, DCS and controllers | 12-32 V DC | 2 Hz to 1 kHz ±10% | Faraday cage electronics | Stainless steel | IP67 (IP68 on 2287W)
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Hollow shaft Ø6–12.7 mm | Housing Ø46.5 mm | 1 to 2540 impedances/revolution | NPN, PNP, push-pull, line driver | Power supply 5–30 V | IP53 shaft side | Oldham, electrical zero alignment
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Ø58 mm, servo, Ø10 h8 shaft | Up to 25 bits in 4096 revolutions | Parallel or parallel with preset | Push-pull 20 mA | 10–30 V power supply | IP64 shaft (IP66 sealed) | Step frequency 200 kHz
ATESTEO LOGO, manufacturer of torque sensors
100 · 200 · 500 N·m | Clase 0,04 % | 21 000 rpm (25 000 opc.) | Rotor Ø107 mm | Taladros 84,0 mm | RS422, tensión, bus CAN
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Through shaft Ø6, 8, 10, 12 or 15 mm | Housing Ø59 mm | 1 to 3600 impedances/revolution | NPN, PNP, push-pull, driver, 1 Vpp | Power supply 5–30 V | IP64 shaft (IP65 sealed) | Collar, elastic ±0.2 mm axial
NESA Environmental Meters
0÷2Vdc · 4÷20mA · RS485/Modbus | 0÷100% VWC · 0-20 mS/cm | FDR 70MHz · PT100 | AISI 316L STAINLESS STEEL electrodes | 71 x 45 x 16mm | 12÷24Vdc | IP68
Pesacam logo: Weighing systems for trucks
Onboard scale | Bluetooth to Android and iOS app | Wireless to cabin | 3 sensors | Manufactured in Bellvei (Tarragona)
Official logo of Novotechnik, manufacturer of linear sensors, position transducers, and industrial encoders
Ratiometric output 0.25…4.75 V | Ø 22mm | Resolution 16 bits | Shaft Ø 6 mm | 5 VDC (4.5 … 5.5 VDC) | IP50/IP65 | Measurement range: 44 turns (15840°)
NESA Environmental Meters
0-2 / 0-20 / 0-200 kcd/m² | ±5 % fs | Silicon photodiode | 4÷20mA loop, 2 wires | 16 ÷ 40Vdc | IP67
Shopping Basket