LU06 Ultrasonic Level Sensor

Budget-friendly price Request a quote
Piezoelectric Ultrasound 65 kHz | 0÷6 m | 0.1 % fs @ 20°C | 4÷20mA | 10.8÷30 Vdc | IP66 | 180 x 162 mm

The NESA LU06 is an ultrasonic hydrometer or snow level sensor with a piezoelectric transducer housed in a screen that protects it from direct sunlight and wind gusts. It is used as a hydrometer and snow gauge, with automatic temperature compensation.

Typical range 0–6000 mm with a 300 mm dead zone, sensitivity 1 mm, accuracy 0.1% fs @ 20°C (ΔT < 2%), response time < 1 s, and operating frequency 65 kHz. Output 4–20 mA (LU06-B), power supply 10.8–30 Vdc, IP66 aluminum housing.

Key points

  • Typical range 0÷6000mm; dead zone 300mm
  • Sensitivity 1 mm; accuracy 0.1% fs @ 20°C (∆T < 2%); response time < 1s
  • Piezoelectric transducer, working frequency 65 kHz; automatic temperature compensation
  • 4÷20mA output; with MCS module (optional) RS485 ModBus
  • Power supply 10.8÷30 Vdc, consumption < 1.2 W (measured); protections against reverse polarity and transients
  • Operating conditions -25 ÷ +70°C; aluminum body IP66; 330g; CE

Technical Frequently Asked Questions

What is its range and accuracy?

Typical range 0÷6000mm with a dead zone of 300mm. Accuracy 0.1% fs @ 20°C (∆T < 2%) and sensitivity 1 mm.

What kind of outlet and power supply does it have?

4÷20mA output (LU06-B), with MCS module (optional) RS485 ModBus. Power supply 10.8÷30 Vdc, consumption < 1.2 W (measured).

What level of protection does it have?

IP66 aluminum body, with protection against reverse polarity and transients.

Properties

FeatureSpecification
Measurement and operating principle
Measured magnitudeHydrometric or snow level
Transducer typePiezoelectric
Typical range0÷6000mm
Dead zone300mm
Sensitivity1 mm
Accuracy0.1% fs @ 20°C (∆T < 2%)
Response time< 1s
Operating frequency65 kHz
Temperature compensationAutomatic
Regulatory complianceEC
Exit signals
Output signal (LU06-B)4÷20mA
With MCS module (optional)RS485 ModBus
Power supply, environment, and mechanical data
Feeding10.8÷30 Vdc
Consumption< 1.2 W (in measurement)
Operating conditions-25 to +70°C
ProtectionsAgainst polarity reversal and transients
BoxAluminum body IP66
Weight330g
ReferenceConfiguration
LU06-BLU06BRange: 0–6 m · Output: 4–20 mA · Supply: With calibration report
NESA LU06 Ultrasonic Level Sensor
Dimensions of the NESA LU06 ultrasonic level sensor

Other products

DPF Sensors logo
Load cells equivalent to TLC-6L and NLC-24L UH34-2.4-0
DPF Sensors logo
Conductive plastic linear potentiometer.
B&C Electronics – Italian manufacturer of industrial water sensors and analyzers
Conductivity range from 0 to 20 mS/cm. Output 4/20mA
Dimetix_AG-1
Industrial laser sensor for measuring up to ~100 m directly on natural surfaces and up to 150 m with reflector, with ±1 mm @2σ and up to 100 Hz.
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
B10 flange mounting Ø115 mm | Housing Ø96 mm, shaft Ø11 h7 | 1 to 3600 imp/rev | NPN, PNP, push-pull, driver, TTL | Power supply 5–30 V | IP64 shaft (IP66 with Z option) | Up to 6000 rpm (3000 with Z)
DPF Sensors logo
Wire displacement sensor, ranges from 4000 mm to 20000 mm, with output signal in 5 Kohm resistance, 0-5 / 10 Vdc, 4-20 mA, RS485 or pulses, option with IP67 environmental protection
Official logo of Novotechnik, manufacturer of linear sensors, position transducers, and industrial encoders
CANopen | Ø 69 mm | 14-bit resolution | Shaftless: magnetic placeholder | 12/24 VDC (8 … 34 VDC) | IP67 / IP69K | 360°, 1 or 2 channels
Official logo of Novotechnik, manufacturer of linear sensors, position transducers, and industrial encoders
Output 4 … 20 mA or 0 … 20 mA | Electrical stroke 10 mm | Linearity ±0.1 … ±0.4 % | Return stem | 18 … 30 VDC | IP50 or IP67 | 2 m cable
DPF Sensors logo
Humidity and temperature sensor for walls, ducts and exteriors
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Hollow shaft Ø4–10 mm | Housing Ø46.5 mm | 1 to 2540 impedances/revolution | NPN, PNP, push-pull, line driver | Power supply 5–30 V | IP53 shaft side | Helical, electrical zero alignment
Shopping Basket