Class A rocker rain gauge PL400 and PL400R
- Manufacturer: Nesa
- Category: Rain - Snow, Meteorology – Climatology, SENSORS
El NESA PL400 es un pluviómetro de balancín de clase A con cuerpo cilíndrico de aluminio anodizado y superficie de captación de 400 cm². Un orificio en forma de embudo con filtro específico dirige la lluvia hacia un balancín de acero inoxidable apoyado sobre un sistema de cuchillas, y un dispositivo reed detecta sus conmutaciones filtrando el ruido eléctrico y mecánico. El modelo PL400R lleva calefactor para clima frío y el módulo MCS normaliza la señal.
Intensidad máxima de conteo 0÷600 mm/h, sensibilidad 0,2 mm, constante de conversión 0,2 mm/imp. y precisión media ±2% @30mm/h. Salida N por impulsos de contacto seco reed, A 0÷2Vdc, B 4÷20mA y C RS485 / Modbus; alimentación 10÷30Vdc.
Key points
- Class A according to UNI 11452:2012 and UNI 17277:2020; WMO standards and CE regulations
- Superficie de captación 400 cm²; sensibilidad 0,2 mm; constante de conversión 0,2 mm/imp.
- Intensidad máxima de conteo 0÷600 mm/h; precisión media ±2% @30mm/h
- Output N: pulses by dry reed contact (R < 250 Ω; switching time < 10 ms); outputs A, B and C with 0÷100 mm accumulation and auto-reset at 100 mm
- Alimentación 10÷30Vdc; calefactor PL400R máx. 60W@12Vdc con sistema de control de temperatura integrado
- Condiciones de funcionamiento 0 ÷ 80°C (-40 ÷ +80°C con calefactor); 3,3kg con soporte
Technical Frequently Asked Questions
What intensity and precision does it have?
Intensidad máxima de conteo 0÷600 mm/h y precisión media ±2% @30mm/h. En las salidas A, B y C la medida es un acumulado de 0÷100 mm con autorreinicio a 100 mm.
What exits does it have?
N: impulsos por contacto seco reed (R < 250 Ω). Con módulo MCS: A 0÷2Vdc, B 4÷20mA (no autoalimentada) y C RS485 / Modbus con ID estándar 010 (9600 baudios, paridad N, 8 bits de datos, 1 bit de parada).
What food and what temperature does it support?
Alimentación 10÷30Vdc, consumo típico 4÷20mA @12Vdc en A, B y C. Condiciones de funcionamiento 0 ÷ 80°C; el PL400R, con calefactor de máx. 60W@12Vdc, -40 ÷ +80°C.
Properties
| Feature | Specification |
|---|---|
| Measurement and operating principle | |
| Measured magnitude | Precipitation |
| Class | According to UNI 11452:2012 and UNI 17277:2020 |
| Transducer type | Stainless steel rocker arm with magnetic reed switch |
| Switching time | < 10 ms |
| Catchment area | 400 cm² |
| Conversion constant | 0.2 mm/imp. |
| Sensitivity | 0.2 mm |
| Measurement range (N) | Unlimited reed contact |
| Measurement range (A, B, C) | Accumulated 0÷100 mm with auto-reset at 100 mm |
| Maximum counting intensity | 0÷600 mm/h |
| Average accuracy | ±2% @30mm/h |
| Regulatory compliance | WMO standards and CE standards |
| Exit signals | |
| Exit N | Reed dry contact impulses (R < 250 Ω) |
| Output A (with MCS module) | 0÷2Vdc (0÷100 mm) |
| Output B (with MCS module) | 4÷20mA (0÷100 mm), no autoalimentada |
| Output C (with MCS module) | RS485 / Modbus, Standard ID 010 |
| Output resistance | 100mΩ / 1MΩ |
| Comunicación RS485 / Modbus (salida C) | |
| RS485 interface | Semidúplex |
| Parámetros serie | 9600 baud, N parity, 8 data bits, 1 stop bit |
| Modbus RTU | Solo función 0x03 (lectura de registros de retención) |
| Registros Modbus | 40002-40003 (valor IEEE754 de 32 bit) |
| Power supply, environment, and mechanical data | |
| Feeding | 10÷30Vdc |
| Typical consumption (A, B and C) | 4÷20mA @12Vdc |
| Alimentación del calefactor (PL400R) | Max. 60W@12Vdc |
| Control de temperatura (PL400R) | Integrated temperature control system |
| Protections | Polarity reversal and transient protection; anti-bounce circuit |
| Operating temperature | 0 ÷ 80°C |
| Temperatura con calefactor (PL400R) | -40 to +80°C |
| Material | Anodized anticorodal aluminum alloy, painted white; stainless steel rocker arm |
| Flange | For posts with a max. diameter of 59/80 mm |
| Weight | 3,3kg con soporte |
| Reference | Configuration |
|---|---|
| PL400-APL400A | Heater: No · Output: 0÷2Vdc (0÷100 mm) · Class A according to: UNI 17277:2020 calibration procedure · Supplied: With flange for posts of max. Ø 59/80 mm and calibration report |
| PL400-BPL400B | Heater: No · Output: 4÷20mA (0÷100 mm) · Class A according to: UNI 11452:2012 · Supplied: With flange for poles of max. Ø 59/80 mm and calibration report |
| PL400-CPL400C | Heater: No · Output: RS485 / Modbus, Standard ID 010 · Class A according to: UNI 17277:2020 calibration procedure · Supplied with: Flange for poles of max. Ø 59/80 mm and calibration report |
| PL400-NPL400N | Heater: No · Output: Pulses · Class A according to: UNI 17277:2020 calibration procedure · Supplied: With flange for posts of max. Ø 59/80 mm and calibration report |
| PL400R-APL400RA | Heater: Max. 60 W, with integrated temperature control system · Output: 0÷2Vdc (0÷100 mm) · Class A according to: UNI 17277:2020 calibration procedure · Supplied with: Flange for posts of max. Ø 59/80 mm and calibration report |
| PL400R-BPL400RB | Heater: Max. 60 W, with integrated temperature control system · Output: 4÷20mA (0÷100 mm) · Class A according to: UNI 17277:2020 calibration procedure · Supplied with: Flange for posts of max. Ø 59/80 mm and calibration report |
| PL400R-CPL400RC | Heater: Max. 60 W, with integrated temperature control system · Output: RS485 / Modbus, Standard ID 010 · Class A according to: UNI 17277:2020 calibration procedure · Supplied with: Flange for poles of max. Ø 59/80 mm and calibration report |
| PL400R-NPL400RN | Heater: Max. 60 W, with integrated temperature control system · Output: Pulses · Class A according to: UNI 17277:2020 calibration procedure · Supplied with: Flange for posts of max. Ø 59/80 mm and calibration report |


Related documentation, cases, and guides
Other products









