Explosion-Proof Single-Turn Absolute Encoder A/0B80EXS

Budget-friendly price Request a quote
B10 flange Ø115, centered Ø85 h7 | Shaft Ø10 h7 | 7 to 12 bit (up to 4096 steps) | Parallel, SSI RS422 or analog | 5, 15, 8–24 or 18–28 V | IP65 shaft (IP66 with Z option) | ATEX Ex d IIC T6

The ELCIS 0B80EXS (A/0B80EXS) is a 7-12 bit explosion-proof single-turn absolute encoder with B10 Ø115 flange. Certified by ISSeP according to CENELEC and ATEX standards, suitable for environments with explosive atmospheres (except firedamp), with markings II 2 G Ex d IIC T6 Gb and D Ex tb IIIC T85°C Db IP6X.

Resolution up to 4096 steps per revolution (12 bits) in Gray, Excess, or custom code. Versions: Parallel Gray or Excess (GP, EP), serial Gray or Excess (GS, ES, RS422 transmission), and analog current (A) or voltage (V) versions, the latter two only with 15 V or 18–28 V power supply and 4096 resolution. Electronics: NPN open collector, NPN open collector + PTC, NPN open emitter + PTC, and push-pull in parallel version; serial SSI; analog 4–20 mA and 0–10 V.

Aluminum housing with B10 flange (Ø115) and Ø85 h7 centering, stainless steel shaft Ø10 h7, and a weight of 1300 g. Connection via 1 m IP66 cable (CV1, CV7) or 26c IP65 cable end connector (VM5, TM5, only outside potentially explosive atmospheres). The device has a permanently connected cable suitable for a minimum temperature of 100 °C. Options: sealed bearings (Z), stainless steel housing (N), tropicalization (G), and custom options (X).

  • Marked II 2 G Ex d IIC T6 Gb and D Ex tb IIIC T85°C Db IP6X, ISSeP07ATEX018X certificate.
  • B10 (Ø115) flange with centering Ø85 h7.
  • One-way trip 7 to 12 bit, until 4096 steps per lap.
  • Exit parallel, SSI series (RS422) either analog (the latter only with 15V or 18-28V and 4096 resolution).
  • Stainless steel shaft Ø10 h7, max. radial/axial load. 10 kg.

Technical Frequently Asked Questions

What electronic outputs and interfaces does the 0B80EXS single-turn encoder have?

Parallel versions (GP, EP) with NPN open collector 10 mA, NPN open collector 10 mA + PTC, NPN open emitter 10 mA + PTC or push-pull 10 mA + PTC electronics; SSI series (GS, ES) with RS422 transmission and 125 kHz clock, only with Gray or Excess code; and analog in current (A) or voltage (V), only with 15 V or 18÷28 V power supply and 4096 resolution.

What shaft, flange, and feeds does it support?

Stainless steel shaft Ø10 h7 and B10 flange (Ø115) with centering Ø85 h7. Power supply 5 V ±5 %, 15 V ±5 %, 8÷24 V or 18÷28 V.

What connections and IP rating does it support?

1 m IP66 cable (CV1, and CV7 only in parallel GP, EP version) or 26c IP65 cable end connector (VM5) and 26c sealed IP65 (TM5), these two only outside of potentially explosive atmospheres. Shaft side: IP65 standard and IP66 with sealed bearings (Z). Ambient temperature T6: -20 … +40 °C.

Properties

FeatureSpecification
Mechanics
Weight1300 g
AxisØ10 h7 stainless steel
max radial/axial load.10 kg
Starting torque18 g·cm standard · 50 g·cm with sealed bearings (Z)
bearing life1.5 × 10⁹ revolutions (at 1000 rpm with a load of 1/4 of the maximum allowed)
Electric
Exit-side protectionAccording to connection: IP66 cable, connector at IP65 end of cable
Max resolution.4096 steps (12 bits) single turn (7 to 12 bits)
Exit codesGray, Excess, Custom
Max frequency.50 kHz (SSI clock: 125 kHz)
Feeding5 V ±5 %, 15 V ±5 %, 8÷24 V, 18÷28 V
Max. consumption.180 mA
Protection and environment
axle-side protectionIP65 standard · IP66 with sealed bearings (Z) (IP rating according to CEI EN 60529, EN 60529, IEC 529)
max. continuous RPM6000 standard · 3000 with sealed bearings (Z)
Impact/vibration resistance50 G (11 ms) · 12 G (10 ÷ 2000 Hz)
Ambient temp. (ATEX) / storageT6: -20 … +40 °C / -30 … +85 °C
ReferenceConfiguration
A/0B80EXS-10-5-GP-1-CV7-RA0B80EXS105GP1CV7R10 steps/turn · 5 V ±5 % · gray · NPN open collector 10 mA; parallel version only (GP, EP) · 1 m cable, IP66 (parallel version GP, EP only) · radial output
A/0B80EXS-12-5-GP-1-CV7-RA0B80EXS125GP1CV7R12 steps/turn · 5 V ±5 % · gray · NPN open collector 10 mA; parallel version only (GP, EP) · 1 m cable, IP66 (parallel version GP, EP only) · radial output
Other combinations of resolution, power supply, electronics and connection are available upon request: please contact us and we will confirm the exact reference.
Explosion-proof absolute encoder ELCIS A/0B80EXS
Dimensional drawing of the explosion-proof absolute encoder ELCIS A/0B80EXS

Related documentation, cases, and guides

Other products

DPF Sensors logo
TSM-xxx Series
NESA Environmental Meters
µV, 0÷1Vdc, 4÷20mA, RS485/Modbus | 0 ÷ 2000 W/m² | 0,3 ÷ 3 µm | Clase A (ISO 9060) | 165 x 105 mm | IP67
Official logo of Novotechnik, manufacturer of linear sensors, position transducers, and industrial encoders
Potentiometric output | Stroke 50 … 750 mm | Linearity ±0.04 … ±0.2 % | Resolution < 0.01 mm | 42 VDC max. | IP65 | M12 connector or cable
B&C Electronics – Italian manufacturer of industrial water sensors and analyzers
Measuring range 0-4,000/40,00/400,0/4,000NTU High chemical resistance
Official logo of Novotechnik, manufacturer of linear sensors, position transducers, and industrial encoders
4 cushioned fingers | Contact force 0.14 N | Shaft Ø 3 mm and Ø 6 mm
Official logo of Novotechnik, manufacturer of linear sensors, position transducers, and industrial encoders
Voltage divider | Stroke 10 … 300 mm | Linearity ±0.05 … ±0.25 % | Repeatability 0.01 mm | 42 V max. | IP54 | Cable or M8 connector
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Housing Ø90, spindle Ø12 h7 | Up to 16384 steps (14 bits) | Parallel, SSI or analog (mA or V) | 5, 15, 8–24, 18–28 or 10–30 V | IP66 spindle (IP67 sealed) | Gray, Binary, Excess or BCD
B&C Electronics – Italian manufacturer of industrial water sensors and analyzers
Inductive toroidal conductivity probe with 4-20 mA output and RS485 Modbus RTU. Configurable ranges from 4 to 2,000 mS/cm and TDS up to 1,000 ppt.
NESA Environmental Meters
Pt100 4-wire | -40 ÷ +60°C | Pt100 1/3DIN | ±0.1°C @ 0°C | WMO · EN 15518-3:2011 | 10÷30Vdc | 700g
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Power supply 5-30V | Shaft Ø11mm Stainless Steel | Weight 1450g | Maximum load 18kg | Continuous RPM >6000 | Starting torque 90gcm | Impact resistance 50G | Temperature -30-85°C | Push-Pull PRO output | Protection IP65/67
Shopping Basket