PVC cable set with over-shield and connector 62GB Monitran MTN/CA522

Budget-friendly price Request a quote
For versions with 1186 accelerometer connector | 62GB 3-pin socket with bare ends | Four-conductor PVC plus over-mesh shield | 5 m

The Monitran MTN/CA522 cable set is used with the connector versions of the 1186 series accelerometers: 62GB 3-pin to bare end socket with four-conductor PVC cable plus shield, over-mesh, and 5m standard length.

Pin configuration: pin A to red, pin B to blue, and pin C to green. Guemisa is an official distributor of Monitran in Spain.

Key points

  • Takes 62GB 3-pin to free ends for versions with 1186 connector
  • Four-conductor PVC cable with shield and over-mesh
  • Standard length of 5 m

Technical Frequently Asked Questions

Which sensor is used with the MTN/CA522?

With the connector versions of the Monitran 1186 series accelerometers.

What is the difference between this and the MTN/CA410?

Both have a 62GB 3-pin connector for the 1186; the MTN/CA522 uses four-conductor PVC cable plus shielding with over-mesh, and the MTN/CA410 uses three-conductor PVC.

How do I connect it?

Pin A to the red thread, pin B to the blue thread, and pin C to the green thread.

Properties

FeatureSpecification
Cable and connection
Connector62GB 3-pin socket (MC028)
Another extremeFree extremes
WirePVC with four conductors plus screen, with over-mesh
Standard length5 m
Pin configurationPin A to red, pin B to blue, pin C to green
Compatible sensorsVersions with Monitran 1186 accelerometer connector
ReferenceConfiguration
MTN/CA522 MTNCA522DS0553 Sheet: For versions with 1186 connector; four-conductor PVC cable plus shield with over-mesh, 62GB 3-pin socket to bare ends, 5 m
Drawing of the Monitran MTN/CA522 cable assembly with 62GB 3-pin socket and PVC cable with over-shield
Monitran MTN/CA522 cable connection diagram: 62GB 3-pin MC028 socket, 30mm heat shrink tubing and free ends

Other products

Official logo of Novotechnik, manufacturer of linear sensors, position transducers, and industrial encoders
Magnetostrictive | Stroke 50 … 4250 mm | Incremental A/B/Z, RS422 | Resolution 1 or 5 µm | Linearity ≤ ±25 … ±120 µm | 13 … 34 VDC | IP67 / IP68
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Hollow shaft H7 up to Ø15 | Ø59, tangential anti-rotation pin | Up to 8192 steps (13 bits) | Parallel, SSI or analog (mA or V) | 5, 15, 8–24, 18–28 or 10–30 V | IP64 shaft (IP66 sealed)
B&C Electronics – Italian manufacturer of industrial water sensors and analyzers
Combined glass/gel reference pH electrode, 9.5mm diameter Epoxy body and 1.5m cable with BNC connector.
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Pinion module 0.796 | Stroke 100 to 34000 mm | Incremental, resolution 1 µm–1 mm | Output NPN, PNP, push-pull or driver | Power supply 5, 12, 24 V or 8–24 V | IP65 in CV connection | Max. error ±4 µm (1 and 2 µm)
NESA Environmental Meters
Modbus RS485 · Modbus TCP-IP · RS232 | 500÷1200 hPa | ±0.15 hPa @ +20°C | Capacitive transducer | 200 x 110 x 60mm | 10.8÷15Vdc | IP67
Monitran-Logo
Standalone RMS acceleration indicator | 2-digit LCD display | Displayed range 0-20 g RMS | Bandwidth 6 Hz – 5 kHz (nominal) | Lithium-manganese battery, 5 years | IP65 | -20 to +85 °C
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Housing Ø38 mm, shaft Ø6.35 h7 | 8 to 2048 bpm | Line driver 26LS31/ET7272, NPN | Power supply 5, 8–24, 18–28, 10–30, 5–30 V | IP64 shaft (IP66 sealed) | 12000 rpm with low torque (option B) | Impacts 100 G (6 ms)
Encardio Rite vibrating wire sensors and geotechnical instrumentation
Vibrating wire piezometer for pore pressure (interstitial water pressure) and groundwater level | Ranges 0.2 to 10 MPa | Accuracy ±0.25 % FS
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Housing Ø58 mm | Shaft Ø10 h7 stainless steel | 1 to 25000 pulses/revolution | NPN, PNP, push-pull, driver, TTL | Power supply 5–30 V | IP64 shaft, IP66 sealed | Radial/axial load 4 kg
ATESTEO LOGO, manufacturer of torque sensors
30 · 40 · 50 kN·m | Clase 0,10 % | 10 000 rpm | Rotor Ø348,00 / 330,00 mm | Taladros 290,0 mm | Frecuencia, tensión, corriente, bus CAN
Shopping Basket