Incremental Encoder with Tachymetric Dynamo I/115TT
- Manufacturer: ELCIS Encoder
- Category: Encoder, Incremental Encoder, Incremental Encoder with Tachometric Dynamo, SENSORS
The industrial environment demands robust control systems resistant to vibration, dust, and constant humidity. This Incremental Encoder with Tachometer Dynamo I/115TT addresses the critical need to measure mechanical speed under adverse conditions without premature electronic failure or signal integrity loss.
The technical solution integrates a tachymeter generator protected by an IP65 cover, guaranteeing a stable signal at 6000 RPM continuous with a starting torque of 350 gcm and a bearing life of more than 1.5 x 10^9 turns to ensure long-term operational reliability.
Constructed from anodized aluminum, it withstands operating temperatures from 0 to 70 °C and mechanical impact resistance of 50G, allowing for direct installation on heavy machinery. Available in guemisa.es.
- Tachometric generator protected by an IP65 cover for harsh environments.
- Versatile power supply between 5÷30V with standard consumption of 120 mA.
- Bearing life of 1.5 x 10^9 turns guaranteed by the factory.
- Vibration resistance of 12 G and storage temperatures up to 85 °C.
Technical Frequently Asked Questions
How does the I/115TT differ from the standard I/115T model?
The I/115TT incorporates a tachymeter generator protected by an IP65 cover, while the I/115T is the basic version without additional protection against dust and moisture at the sensor output.
What alignment precautions are required for the I/115TT axle?
The Ø11mm stainless steel shaft supports a maximum radial load of 18 kg, requiring careful assembly to avoid misalignments that affect the phase tolerance of ±15°.
What connectors and output options are available for the I/115TT?
NPN, PNP, Open Collector, Push-Pull PRO and 26LS31 or 88C30 line driver outputs are offered depending on the electronic configuration selected in the model code.
Properties
| Feature | Specification |
|---|---|
| Sensor Type | Incremental with Dynamo Tachymetric |
| Main Application | Mechanical speed and position measurement |
| Power Supply | 5÷30V DC (Standard) |
| Output Shaft | Stainless Steel Ø11mm |
| Maximum Radial/Axial Load | 18 kg |
| Maximum Continuous Speed | 6000 RPM |
| Starting Torque | 350 gcm |
| Bearing Life | 1.5 x 10^9 turns |
| Impact Resistance | 50 G x 11ms |
| Vibration Resistance | 12 G (10 ÷ 2000 Hz) |
| Operating Temperature | 0 ÷ 70 °C |
| Storage Temperature | -30 to 85 °C |
| Number of Impulses/Revolution | 1 ÷ 3600 PPR |
| Maximum Frequency | 100 kHz (Option 160) |
| IP protection | IP65 (Standard) / IP66 (Option) |
Other products
