ANESB Ultrasonic Anemometer
Budget-friendly price Request a quote
Biaxial ultrasonic anemometer with no moving parts for measuring wind speed and direction. Range 0-60 m/s, resolution <0.01 m/s, output 4-20 mA or RS485 Modbus.
- Manufacturer: Nesa
- Category: Anemometers and Wind Vanes, SENSORS, Weather sensors
El anemómetro ultrasónico ANESB mide la velocidad y la dirección del viento mediante tecnología ultrasónica, sin partes móviles. Es un sensor biaxial.
Cuatro transductores ultrasónicos, dispuestos en dos ejes ortogonales (X-Y), miden el tiempo de tránsito de pulsos acústicos entre los sensores. A partir de él se calcula el vector de velocidad del viento en el plano horizontal.
- Rango de medida de velocidad del viento: 0 … 60 m/s.
- Resolución de velocidad del viento: < 0.01 m/s.
- Medición de dirección del viento: 0 … 359°.
- Salidas: 4–20 mA o RS485 Modbus RTU.
- Protección: IP66 sensor / IP68 conector.
- Material: resina técnica y aluminio anodizado.
- Temperatura de funcionamiento: -40 °C … +70 °C.
- Altura: 320 mm. Diámetro: 162 mm.
- Conexión mecánica: rosca inferior 40 mm.
Las salidas 4–20 mA y RS485 Modbus RTU permiten la conexión a sistemas de monitorización ambiental, PLC o SCADA.
Aplicaciones: parques eólicos, estaciones meteorológicas, agricultura de precisión, presas, instalaciones solares, monitorización ambiental y offshore.
Properties
| Parameter | Worth |
|---|---|
| Wind speed measurement range | 0 … 60 m/s |
| Wind speed resolution | < 0.01 m/s |
| Wind direction measurement | 0 … 359° |
| Measurement principle | Ultrasonic with no moving parts |
| Number of transducers | 4 ultrasonic transducers |
| Available departures | 4–20 mA / RS485 Modbus RTU |
| Protection | IP66 sensor / IP68 connector |
| Material | Technical resin and anodized aluminum |
| Operating temperature | -40 °C … +70 °C |
| Sensor height | 320 mm |
| Sensor diameter | 162 mm |
| Mechanical connection | Bottom thread 40 mm |
| Applications | Weather stations, wind farms, agriculture, environmental monitoring, offshore |
Related documentation, cases, and guides
Other products
Electrochemical Technology | VARIVENT® Connection | -10 °C to +150 °C (SIP) | Stainless Steel and PEEK
General Purpose | Stainless Steel | TNC Connector | Sensitivity 100mV/g | Frequency 2Hz-13kHz | Non-Insulated Base | IP65 Protection | Range ±80g | Weight 52g | Temp. -25 to 120°C
Shaft Ø4, 6, 8, 9.52 or 10 mm H7 | Flange Ø59.5 mm | 1 to 2540 impedances/revolution | NPN, PNP, push-pull, line driver | Power supply 5–30 V | IP53 shaft side | Elastic, electrical zero alignment
Magnetostrictive | Stroke 50 … 4250 mm | SSI 24 and 25 bit | Resolution 1, 5 or 10 µm | Linearity ≤ ±25 … ±120 µm | 13 … 34 VDC | IP67 / IP68
Spindle Ø10 h7, optional Ø8, 12 or 12.7 | Up to 65536 steps × 4096 revolutions | SSI with preset, Gray or binary | Optional Sin/Cos 1024 or RS422 16384 ppr | Power supply 10–30 V | IP65 spindle (IP66 sealed) | Max. load 5 kg radial/axial
Servo-type clamping Ø90 | Centering Ø80 h7 and Ø40 h7 | Ø12 h7 stainless steel shaft | 1 to 3600 impedances/revolution | NPN, push-pull, line driver, TTL | 5–30 V power supply | IP65 shaft (IP66 with Z-seal)
PROFIBUS-DP Class 2, 12 Mbaud | Square flange □63.5 mm | Shaft Ø10 h8 | 16 bit; 30 bit at 16384 turns | 10–30 V DC | IP64 shaft (IP66 sealed)
Housing Ø63 mm, shaft Ø9.52 h7 | 100/127 to 2000/2540 pulses/revolution | Imperial or metric up/down counting | 26LS31 driver output | 5 V ±5 % power supply | IP65 shaft (IP66 sealed) | 10-pin connector
