Reflective plate for Dimetix 500113 laser distance sensor

Reflective plate for laser distance sensor It is used as a measurement target when it is necessary to improve the signal received by the sensor, work at long distances, or have a defined reference surface for the laser beam.

Directing the laser at a suitable reflective surface produces a stronger return signal than on many natural, dark, or poorly reflective surfaces. This allows Improve the reliability of the measurement and increase the range of a laser distance sensor, always within the specifications of the model used.

The Dimetix 500113 It is an orange reflective plate of 210 × 297 mm, made of aluminum 1.5 mm thick and designed for laser distance sensors of the Dimetix D Series. Depending on the sensor used, the reflector measurement can reach distances of up to 500 meters.

What is the purpose of a reflective plate in a laser distance sensor?

Laser distance sensors calculate distance from the optical signal that returns to the device after reaching the object being measured. The amount of reflected signal depends on several factors, including the color, finish, angle, and surface characteristics.

A reflective plate for laser measurement It provides the sensor with a known and defined target, facilitating a more favorable return signal. Its use is particularly interesting in industrial automation, positioning, and long-distance measurement applications.

• Long-distance laser measurements in which the natural reflection of the object is not sufficient.
• Measurement on dark or low reflectivity surfaces.
• Systems where it is necessary to have a fixed and clearly defined objective.
• Positioning of trolleys, overhead cranes, gantries, stacker cranes and mobile machinery.
• Measurement of displacements and positions in industrial facilities.
• Applications where desired improve the intensity of the reflected signal received by the sensor.

Long-distance laser measurement with reflector

In laser measurement, the maximum range depends not only on the reflective plate. It also depends on the sensor model, the distance, the environmental conditions, and the geometry of the installation.

Within the Dimetix D Series, there are sensors designed to reach different distances on a reflective target. The longer-range models can take measurements up to 500 m using a suitable reflective surface.

For this reason, the 500113 board is particularly suitable when using laser distance sensors for long-range measurements and it is necessary to increase the optical signal received compared to that which would be provided directly by the measured object.

How to install a reflective plate for a laser sensor?

To obtain a reliable measurement, it is important to correctly install the reflector in relation to the sensor beam.

• The laser dot must remain within the useful surface of the plate throughout the entire measurement range.
• It is advisable to avoid a perfectly perpendicular orientation to the beam when an excessively direct reflection may occur.
• Dimetix recommends a slight approximate tilt of 1st to 3rd with respect to the perpendicular of the beam.
• Whenever possible, avoid having a source of intense light, especially the sun, shine directly on the lens.
• The minimum and maximum distance specified for each sensor model must be respected.

Proper alignment of the sensor and the plate allows for better use of the reflected signal and provides stable measurement in industrial positioning applications.

Dimetix 500113 Reflective Plate

The reference 500113 from Dimetix It corresponds to a reflective plate of 210 × 297 mm format specially designed as a target for the D Series laser distance sensors.

Its size makes it easy to keep the laser dot on the reflector even when there is movement between the sensor and the object being measured. The plate can be installed on either the moving or stationary part of the machine, depending on the application configuration.

It is a passive accessory: It requires no power supply, electronic configuration, or electrical maintenance..

Common applications

• Positioning of overhead cranes and gantries.
• Position control of trolleys and stacker cranes.
• Displacement measurement in industrial machinery.
• Positioning of material handling systems.
• Distance measurement in automated warehouses.
• Automation systems with large travel distances.
• Position control in outdoor or indoor installations, depending on the sensor's working conditions.

Compatibility with Dimetix laser sensors

The 500113 reflective plate is designed for use with the Dimetrix D Series laser distance sensors.

The available range depends on the model used. For example, within the family there are sensors designed to work on reflectors at 50 m, 150 m, and up to 500 m. Therefore, Using this board does not automatically turn any sensor into a 500m deviceThe appropriate sensor must be selected for the required distance.

If you need to measure a specific distance and don't know which sensor or reflector to use, Guemisa can help you select the right combination of laser sensor, reflective plate, and mounting accessories.

You can also check out our full range of Dimetix sensors and accessories.