Rotary shovels
CNPR SERIES.
- Category: SENSORS, Level Sensors, Level sensors for solids
ROTARY BLADE LEVEL SWITCH: It is based on a slow-speed synchronous motor-reducer that makes the blade rotate constantly.
Properties
When the product reaches the pallet and it encounters resistance to its rotation, a gear motor rotates on its own axis, activating two micro-switches: one disconnects the motor and the other acts on the control mechanisms.
When the pallets are free of product, the gear motor reconnects by reversing the control signal.Slow speed synchronous gear motor
Delay on disconnection: 2 s
Types of blades: Different depending on the application
Blade material: AISI303 stainless steel
Other products
pH sensor for range 0 to 13pH with S7 connector Compatible with all controllers on the market
I/80 – Incremental Encoder Ø 80 mm, solid shaft Ø 10 mm or Ø 12 mm, robust metal body, resolution up to 25000 dpi
Sensor de Par Rotativo NCTE | Serie 7000 | 5.000 Nm | 3.600 RPM
Wind direction sensor for industrial use, with 4-20 mA output signal
Inductive (Dual-Frequency) | 4,000 – 5,000 N·m | 15,000 RPM | PCD Flange 155.5 mm
Inductive Transducer | 1,000 N·m | 20,000 RPM Limit | 101.5 mm PCD Flange | Class 0.02% | Inertia 0.0033 kg·m²
Entrada Superior | Sensibilidad 100mV/g | Frecuencia 2Hz-10kHz | Salida AC Aislada | Rango Dinámico ±80g | Alimentación IEPE | Temp. -55 a 140°C | Protección IP67 | Acero Inoxidable | Conector 2-pin Mil-C-5015
Load cell for 3-axis stress measurement, design-based measurement range, output signal 2 mV/vx axis
I/90Z – Incremental Encoder Ø 90 mm, through shaft Ø 30 mm, robust metal body, resolution up to 36,000 dpi