Incremental Encoder for Racks I/62C
- Manufacturer: ELCIS Encoder
- Category: Encoder, Incremental Encoder, Incremental Encoder for Rack and Pinion, SENSORS
El ELCIS 62C (I/62C) es un encoder incremental con piñón y carcasa Ø62 mm, de 1 a 10000 impulsos por vuelta. Es similar al mod. 172C, pero sin sistema de precarga del piñón.
The I/62C offers 1 to 10,000 pulses per revolution, a maximum frequency of 60 kHz (100 kHz optional), and NPN, PNP, push-pull, TTL 7404 electronics, 26LS31 and 88C30 drivers, and a 1 Vpp sine wave output. It is powered by a voltage between 5 and 30 V depending on the version.
Base y tapa de aluminio anodizado y piñón de acero inoxidable, con piñones de 13, 16 o 34 dientes o eje Ø8. Admite 4 kg de carga radial/axial, trabaja de 0 a +70 °C con protección IP66 en el lado del eje y se conecta por cable de 1 m o con conector en extremo de cable, con salida radial.
- Encoder with pinion, similar to mod. 172C, without pinion preload system.
- Resolution of 1 to 10000 pulses per lap and frequency up to 60 kHz (100 kHz optional).
- Stainless steel pinion 13, 16 either 34 teeth, or axis of Ø8.
- Nutrition 5 to 30 V depending on the version and electronics: NPN, PNP, push-pull, TTL 7404, 26LS31 and 88C30 drivers and sinusoidal 1 Vpp.
Technical Frequently Asked Questions
What pinions does the I/62C accept?
13-tooth pinion (B), 16-tooth pinion (C) or 34-tooth pinion (D), or Ø8 shaft (A).
What connections does it offer?
1 m cable (CV) or cable end connector; the output is radial.
What is the maximum frequency it supports?
60 kHz as standard; 100 kHz with option V (75 kHz with option R).
Properties
| Feature | Specification |
|---|---|
| Mechanics | |
| Housing | Ø62 mm |
| Weight | 200 g |
| Pinion | Stainless steel, without preload system (see "Possible Sprockets") |
| max radial/axial load. | 4 kg |
| Electric | |
| Exit-side protection | According to connection: IP65 (see technical specifications) |
| Feeding | 5–30 V according to version (see technical specifications) |
| Max. consumption. | 120 mA Standard · 180 mA line driver (customizable upon request) |
| Impulses per lap | 1 to 10000 |
| Max frequency. | 60 kHz (100 kHz optional) |
| Protection and environment | |
| axle-side protection | IP66 standard (without sealing or low torque options) |
| max. continuous RPM | 3000 (intermittent: +30 %) |
| Impact resistance | 50 G × 11 ms |
| Vibration resistance | 12 G (10–2000 Hz) |
| Operating temperature | 0 … +70 °C (customizable upon request) |
| Storage Temp. | -30 … +85 °C |
Other products
