Incremental Encoder for I/40Z Motors

Miniature design Ø40 mm | Through-shaft Ø6 to Ø12 mm | Tangential coupling | Aluminum base and steel cover | 10 to 2500 pulses/revolution | Max. frequency 180 kHz | Power supply 5÷24 V | Shaft load up to 2 kg | Max. consumption 60 mA | Weight 120 g

Manufacturer: ELCIS Encoder
Category: Encoder, Incremental Encoder, Incremental Encoder for Motors, SENSORS

The ELCIS I/40Z model is a miniature incremental encoder equipped with tangential coupling, suitable for general use.

It has an aluminum base, a steel cap and a steel through shaft of Ø6, Ø8, Ø10 or Ø12 mm, weighing 120 g and with a maximum radial/axial load of 2 kg.

It offers 10 to 2500 pulses per revolution with a maximum frequency of 180 kHz and standard NPN, open collector (R), push-pull (H), or line driver (N) electronics. Available in guemisa.es.

Diameter Ø40 mm: miniature encoder with through shaft Ø6, Ø8, Ø10 or Ø12 mm.
Four output electronics: Standard NPN, open collector NPN R, push-pull H and line driver N.
Maximum frequency 180 kHz: from 10 to 2500 pulses per revolution, in standard values (see technical data sheet).
Aluminum base and steel lid: 120g weight and IP52 on the shaft side.

Technical Frequently Asked Questions

What through shaft diameters does the I/40Z encoder support?

Ø6, Ø8, Ø10 or Ø12 mm (codes 6, 8, 10 and 12). The encoder shaft is made of steel.

What is the maximum frequency it reaches?

180 kHz, with 10 to 2500 pulses per revolution.

What is the weight of the I/40Z encoder?

It weighs 120g. The base is made of aluminum and the lid of steel.

Properties

Feature	Specification
Mechanics
Housing	Aluminum base and steel lid
Weight	120 g
Axis	Hollow through shaft Ø6÷12 mm steel
max. axial/radial load.	2 kg
Bearing life	1.5 × 10⁹ revolutions
Electric
Exit-side protection	According to connection (IP65 cable)
Feeding	5÷24 V (5 V ±5 %, 12÷24 V)
Max. consumption.	60 mA (standard) / 50 mA (line driver)
Impulses per lap	10 to 2500
Max frequency.	180 kHz
Protection and environment
axle-side protection	IP52
max. continuous RPM	5000 rpm (Intermittent max. RPM: Continuous max. RPM + 30 %)
Impact resistance	50 G × 11 ms
Vibration resistance	12 G (10 ÷ 2000 Hz)
Operating temperature	-10 … +70 °C

Other products

Schreiber SM24 Series Linear LVDT Sensor M12x1 Threaded

Passive Inductive | Range 5 to 15 mm | M12x1 Threaded Housing | Infinite Resolution | IP67 | External Analog Output

Displacement, LVDT Unamplified, SENSORS, LVDT Sensors

NCVR DB INOX * with level relay

CONDUCTIVE ELECTRODES WITH BUILT-IN AMPLIFIER

SENSORS, Level Sensors, Level Sensors for Liquids

Monitran MTN/2330 Triaxial Accelerometer

IEPE Triaxial Accelerometer Monitran MTN/2330 | ±80g | 10kHz | 100mV/g | IP67

Accelerometers and Vibration Sensors, Amplified, SENSORS

Torque Sensor F23iS 20000 Nm | 12,500 RPM | Continuous Rotational Test

Inductive Telemetry | 20,000 N·m | Rotational Limit 12,500 RPM | PCD Flange 218.0 mm | Inertia 0.1485 kg·m²

Very high torque (10,000-150,000 Nm), Rotary, Torque sensor

B&C SI161 Submersible pH Sensor

pH probe for immersion in PVC tube. Length 720 mm.

Water quality, SENSORS, pH and Redox Probes

I/40F Miniature Incremental Encoder

Threaded flange 18×1 | Metal housing Ø40 mm | Aluminum base and steel cover | Solid shaft Ø6 h7 (optional Ø8 mm) | Corteco oil seal (IP65) | 10 to 2500 pulses/revolution | Max. frequency response 180 kHz | Power supply 5 VDC or 12÷24 VDC | Protection IP52 / IP65 | Weight 150 g

Encoder, Incremental Encoder, Miniature Incremental Encoder, SENSORS

A/790 Multi-Turn Absolute Encoder

Programmable up to 65,536 steps in 4,096 revolutions | SSI serial interface with preset | Sine/Cosine 1024 ppr or incremental RS422 output | Gray or binary codes | 10–30 V power supply | Max. consumption 200 mA | Ø10 h7 stainless steel spindle | Max. radial/axial load 5 kg | Impact resistance 40 G (11 ms) | Weight 750 g

Encoder, Absolute Encoder, Multi-turn Absolute Encoder, SENSORS

HPS-Sxx

Miniature size wire displacement sensor, ranges 250, 500, 750, 1000 mm

Displacement, Linear by thread, SENSORS

Laser Connection Kit

Dimetix laser sensor setup starter kit

Laser distance sensors

Single-turn Absolute Encoder A/359ZP

Hollow through shaft H7: Ø6, Ø8, Ø10, Ø12 or Ø15 mm | Anti-rotation pin and set screws | Resolution up to 8192 steps/revolution (13-bit) | Gray code | Parallel output via 1 m cable (IP65) | Power supply 5 V, 15 V, 8–24 V, 18–28 V or 10–30 V | Max. radial/axial load 4 kg | Shaft-side protection IP64 (IP65 sealed) | Max. continuous speed 6000 rpm (8000 rpm under torque) | Operating temperature 0…+70 °C

Encoder, Absolute Encoder, Single-turn Absolute Encoder, SENSORS