High Resolution Incremental Encoder I/90Z
- Manufacturer: ELCIS Encoder
- Category: Encoder, Incremental Encoder, High Resolution Incremental Encoder, SENSORS
The I/90Z High Resolution Incremental Encoder solves the critical need for precise incremental signal in dividing tables and complex mechanical applications where internal tangential coupling ensures stability without external elements vulnerable to wear or environmental interference.
Its electronics support a maximum frequency of 100 kHz and a starting torque greater than 80 gcm, allowing position detection with adjustable resolution up to 36000 pulses per revolution in demanding industrial environments that require high reliability.
Constructed from anodized aluminum, it withstands 12 G vibrations and operating temperatures between 0 and 70 °C to ensure durability. This I/90Z High Resolution Incremental Encoder is available in guemisa.es.
- Internal tangential coupling adjusted for dividing tables.
- Anodized aluminum base and lid for industrial durability.
- Lifespan of ball bearings of 1.5 x 10^9 revolutions.
- Impact resistance of 50 G x 11ms and vibration resistance of 12 G.
Technical Frequently Asked Questions
How does the I/90Z model differ from the I/E6 model of the same series?
The I/90Z is specifically designed for internal tangential coupling on dividing tables, whereas the I/E6 typically requires external configuration. Furthermore, the I/90Z weighs 750g and features axial joint tolerances of ±0.2 mm optimized for its specific application.
What alignment precautions does the I/90Z shaft require during installation?
The datasheet specifies a maximum angular joint offset of ±1° and a radial offset of ±0.05 mm. It is crucial to ensure that the Ø16÷30mm shaft passes through, not just through, to maintain the integrity of the internal tangential coupling and avoid reading errors.
What connectors and output options are available for the I/90Z?
The model supports multiple electronic configurations, including standard NPN, PNP, Open Collector, Push-Pull PRO, and Line Driver. Connection options range from terminal boxes to specific connectors such as VH6 or VM5, as specified in the connection datasheet.
Properties
| Feature | Specification |
|---|---|
| Sensor Type | Incremental |
| Main Application | Dividing tables and internal tangential coupling |
| Base Material | Anodized Aluminum |
| Cover Material | Anodized Aluminum |
| Total Weight | 750 grams |
| Shaft Diameter | Ø 16÷30 mm (Goes through) |
| Maximum Radial/Axial Load | 6 kg |
| IP Outgoing | 65 (Standard) |
| Bearing Life | 1.5 x 10^9 revolutions |
| Impact Resistance | 50 G x 11ms |
| Vibration Resistance | 12 G (10 ÷ 2000 Hz) |
| Operating Temperature | 0 ÷ 70 °C |
| Impulses for Revolution | 1 ÷ 36000 |
| Maximum Frequency | 100 kHz (Option 500) |
| Maximum Consumption | 120 mA (Standard) |
Other products
