M936 Absolute Magnetic Encoder

Budget-friendly price Request a quote
Ø36.5 mm, Ø6 h6 shaft | Servo flange or front screws | 12 bits/revolution; 25 bits/8192 revolutions | SSI (RS422), Gray or binary | 10–30 V power supply | IP64 shaft | 12000 rpm

The ELCIS M936 is a 36.5 mm diameter absolute magnetic encoder with a synchronous serial SSI interface and 12-bit resolution in single-turn mode and up to 25-bit resolution in multi-turn mode. Suitable for use in industrial environments. Mounting options include servo-type flanges or front screws.

Aluminum housing Ø36.5 mm and 150 g. It offers 12 bits per revolution (4096 steps) in single revolution and, in multi-turn, 4096 or 8192 revolutions (up to 25 bits), with output in Gray or binary code.

It withstands impacts of 100 G (6 ms) and vibrations of 10 G (10 ÷ 1000 Hz), with EMC certification according to EN 61000-6-2 and EN 61000-6-4. It is powered by 10÷30 Vdc with a maximum consumption of 0.25 W (S1) and is protected against reverse polarity and overvoltages.

  • Casing aluminum of Ø36.5 mm and 150 g, with servo-type flange or front screw fixing.
  • Resolution of 12-bit single-turn and even 25-bit multiturn (8192 laps).
  • Serial interface SSI (RS485 / RS422) with clock frequency from 100 kHz to 2 MHz.
  • Maximum speed of 12000 rpm continuous and IP64 on the axle side.
  • Nutrition 10 to 30 VDC, with protection against reverse polarity and overvoltages.

Technical Frequently Asked Questions

What angular resolution and number of revolutions options does the M936 encoder offer?

It has single-turn resolution of 12 bits (4096 steps per turn) and multi-turn resolution with 4096 or 8192 turns, up to 25 bits.

What type of communication interface does the M936 incorporate?

It incorporates the SSI synchronous serial interface, with RS485/RS422 transmission (line driver according to RS422) and supported clock frequency from 100 kHz to 2 MHz.

How is the M936 encoder mechanically fixed?

It is secured by means of a servo-type flange or by means of front screws.

Properties

FeatureSpecification
Mechanics
HousingAluminum (customizable upon request)
Weight150 g
AxisØ6 h6 stainless steel
max radial/axial load.40 / 110 N
Electric
Exit-side protectionIP54 with axial CAW cable (1 m)
Resolution / Turns12 bit single-turn (4096 steps) · Up to 25-bit multi-turn (8192 turns)
Exit codeGray, Binary
Output interface(S1) SSI, RS485/RS422 (line driver according to RS422)
Food / Consumption10÷30 Vcc · 0.25 W max. (S1)
Division accuracy±½ LSB (<13 bit)
Protection and environment
axle-side protectionIP64 (standard)
max. continuous RPM12000 rpm (intermittent: +30%) (max. intermittent speed +30% over continuous)
Impact/vibration resistance100 G (6 ms) · 10 G (10 ÷ 1000 Hz)
Operating/storage temperature-30 … +85 °C / -30 … +85 °C
Technology / ProtectionsSMD; protected against reverse polarity and overvoltages
ReferenceConfiguration
M936-12-13-06-G-S1-0-CAWM936121306GS10CAWResolution: 12 · Number of turns: 13 · Axis: 06 · Gray Code · SSI · 1 m axial cable (IP54)
Other combinations of resolution, power supply, electronics and connection are available upon request: please contact us and we will confirm the exact reference.
ELCIS M936 Absolute Magnetic Encoder
Dimensional drawing of the ELCIS M936 absolute magnetic encoder

Related documentation, cases, and guides

Other products

Official logo of Novotechnik, manufacturer of linear sensors, position transducers, and industrial encoders
Inductive, contactless | SSI 24 and 25 bit | Stroke 100 … 1000 mm | Resolution 1, 5 or 10 µm | Linearity ≤ ±100 µm | 18 … 32 VDC | IP67
DPF Sensors logo
INCLINOMETER RANGE (±) 10°/30°/60° /90°/ To be specified, 1 or 2 axes, ACCURACY: ±0.02º, RESOLUTION: 0.05º
DPF Sensors logo
Load cell for 3-axis stress measurement, design-based measurement range, output signal 2 mV/vx axis
Official logo of Novotechnik, manufacturer of linear sensors, position transducers, and industrial encoders
CANopen | Ø 36 mm | 16 bits per revolution | Shaft Ø 6 mm, Ø 10 mm or hollow Ø 6 mm | 12/24 VDC (8 … 32 VDC) | IP67 / IP69K | Measuring range: 44 revolutions (15840°)
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Absolute, wire diameter 0.51 mm | Stroke up to 6 m | Resolution 0.1 or 1 mm | PROFIBUS-DP Class 2 | 10–30 V DC | IP64 (cable gland IP65) | Linearity ±0.05 % fs.
Official logo of Novotechnik, manufacturer of linear sensors, position transducers, and industrial encoders
Ø 3…10 mm | Max. torque up to 1 Nm | Fork · Double articulation | IPX arms and plates
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Hollow shaft H7, tangential pin | SSI with preset, RS422 | Up to 65536 steps (16 bits) | Gray or binary programmable | 10–30 V | IP64 shaft (IP66 sealed) | Optional Sin/Cos 1024 or RS422 16384 ppr
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Shaft Ø8 h7 | 80 mm square flange | 1 to 1024 imp/rev | NPN, push-pull or line driver | Power supply 5–30 V | IP54 shaft (IP65 Z-seal) | Max. frequency 60 kHz
Shopping Basket