A/959C Multi-Turn Absolute Encoder

Budget-friendly price Request a quote
Ø59 mm, hollow shaft Ø15 F7 | Up to 25 bits in 4096 turns | Parallel or parallel with preset | Push-pull 20 mA | Power supply 10–30 V | IP64 shaft (IP66 sealed) | Built-in elastic coupling

The ELCIS 959C (A/959C) is a 59 mm diameter, 15 mm diameter, F7 hollow shaft (optional 8, 10, 12, or other sizes available upon request) with integrated elastic coupling. It offers up to 25 bits in 4096 turns and features a 20 mA push-pull parallel output. Suitable for general industrial use, it boasts coupling tolerances of ±0.1 mm axial, ±0.2 mm radial, and ±1° angular, radial/axial loads of 40 and 110 N, IP64 protection on the shaft side (IP66 sealed), resistance to 30 G of shock and 10 G of vibration, and operating temperatures from -30 to +70 °C.

The A/959C is a multi-turn absolute encoder with optical readout via LED and IR photodiode array. It allows selection of 4096, 8192, or 65536 steps per revolution and 16, 256, or 4096 revolutions, with a maximum resolution of 25 bits at 4096 revolutions. It outputs the position in Gray or Binary code via a parallel (PP) or parallel with preset (P1) interface, with a 20 mA push-pull output stage and a 200 kHz LSB step rate.

Constructed with a Ø59 mm aluminum housing and a Ø15 mm F7 hollow stainless steel shaft (optional Ø8, Ø10, Ø12 or other dimensions available upon request), it supports radial loads of 40 N and axial loads of 110 N. It features IP64 protection on the shaft side (IP66 in the sealed version), withstands impacts of 30 G and vibrations of 10 G, and operates within a temperature range of -30 to +70 °C.

  • Maximum resolution of 25 bit in 4096 turns.
  • Hollow shaft with integrated elastic coupling: compensates for axial misalignments of ±0.1 mm, radials of ±0.2 mm and angular ±1°.
  • Parallel output interface (PP) or parallel with preset function (P1).
  • Push-pull output stage of 20 mA fed to 10–30 V DC with 200 kHz LSB.

Technical Frequently Asked Questions

What misalignments does the A/959C elastic coupling allow?

The built-in elastic coupling allows a maximum compensation of ±0.1 mm axial, ±0.2 mm radial and ±1° angular.

What hollow shaft options are available?

The standard diameter is Ø15 mm with F7 tolerance, and options are also available for shafts of Ø8, Ø10, Ø12 mm or special diameters upon request.

What functions do the PP and P1 interfaces offer?

The PP interface displays the angular value on the output connector in parallel; the number of conductors is proportional to the resolution and the code type. The P1 interface is the same as the PP interface, but with a preset function.

Properties

FeatureSpecification
Mechanics
HousingAluminum (options available upon request)
Weight400 g
AxisF7 Hole: Standard Ø15 mm; Ø8, Ø10, Ø12 or others upon request
Elastic couplingAxial ±0.1 mm · radial ±0.2 mm · angular ±1°
max radial/axial load.40 / 110 N
Electric
Shaft/outlet protectionIP64 shaft (IP66 sealed) · IP65 outlet
Food / Consumption10–30 V DC · 100–400 mA depending on bits
LSB pitch frequency200 kHz
Exit codesGray, Binary
Division accuracy±½ LSB (<13 bit) ±2 LSB (13–16 bit)
Max resolution.25 bit / 4096 laps
Interface / OutputParallel (PP / P1) · Push-pull 20 mA
Protection and environment
max. continuous RPM6000 standard · 3000 sealed (intermittent: +30 %)
Impact/vibration resistance30 G (11 ms) 10 G (10–1000 Hz)
Operating/storage temperature-30 … +70 °C / -40 … +85 °C
ReferenceConfiguration
A/959C-12-12-15-B-P1-0-CVA959C121215BP10CV4096 steps/rev. · revolutions: 4096 · standard Ø15 mm shaft · Binary · Parallel + Preset · 1 m axial cable · max. 25 bits · IP65
Other combinations of resolution, power supply, electronics and connection are available upon request: please contact us and we will confirm the exact reference.
ELCIS A/959C Multi-Turn Absolute Encoder
Dimensional drawing of the ELCIS A/959C multi-turn absolute encoder

Related documentation, cases, and guides

Other products

DPF Sensors logo
Linear position sensor by wire with incremental encoder, 1,000 mm travel and resolution up to 0.04 mm/pulse, with push-pull output or line driver.
Monitran-Logo
Isolated velocity output of 4 mV/mm/s | Constant current of 0.5 to 8 mA | 5 Hz to 5 kHz ±5% | Dynamic range ±80 g | -25 to 140 °C | Stainless steel | IP67
Official logo of Novotechnik, manufacturer of linear sensors, position transducers, and industrial encoders
Voltage, current or ratiometric output | Ø 36mm | Resolution 12 bits | Shaft Ø 6 mm, Ø 10 mm or hollow Ø 6 mm | 5 VDC or 24 VDC | IP67 / IP6K9K | Up to 360°, 1 or 2 channels
Official logo of Novotechnik, manufacturer of linear sensors, position transducers, and industrial encoders
Voltage or current output | 18 x 18 mm profile | 25 … 200 mm electrical stroke | M5x0.5 threaded stem | 16 … 30 VDC | IP40 | Teach-in with LED
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Housing Ø58.5 mm, flange Ø63 | Shaft Ø9.52 h7 stainless steel | 1 to 25000 imp/rev | NPN, PNP, push-pull, driver, 1 Vpp | Power supply 5–30 V | IP65 shaft (IP66 sealed) | 100 kHz (300 kHz optional)
Official logo of Novotechnik, manufacturer of linear sensors, position transducers, and industrial encoders
Current output 4 … 20 mA | Ø 69 mm | 12-bit resolution | Shaftless: magnetic position marker | 12/24 VDC (9 … 34 VDC) | IP67 / IP69K | 60° to 360°, 1 or 2 channels
Differential pressure switch for air
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Through shaft Ø30, 35, 40 or 42 mm | 1 to 5000 impedances/revolution | NPN, PNP, push-pull, line driver | Power supply 5–30 V | IP65 shaft side | 100 kHz | Internal tangential coupling
LVDT Manufacturer Logo Schreiber Messtechnik
Angular and Rotational Sensor | 1 to 64 Rotations | Metal Housing Ø 22 mm | IP68 | Analog and SSI Output | Floating Shaft or Magnet
Shopping Basket