A/790 Multi-Turn Absolute Encoder

Budget-friendly price Request a quote
Spindle Ø10 h7, optional Ø8, 12 or 12.7 | Up to 65536 steps × 4096 revolutions | SSI with preset, Gray or binary | Optional Sin/Cos 1024 or RS422 16384 ppr | Power supply 10–30 V | IP65 spindle (IP66 sealed) | Max. load 5 kg radial/axial

The ELCIS 790 (A/790) is a programmable multi-turn absolute encoder with up to 65,536 steps (16-bit) in 4,096 turns (12-bit), featuring an SSI interface and incremental Sine/Cosine outputs at 1024 ppr or RS422 outputs of up to 16,384 pulses per turn. It has a Ø10 h7 stainless steel shaft with a 5 kg radial/axial load capacity, resistance to 40 G of impact and 12 G of vibration, and operates between -20 and +85 °C with a 10–30 V power supply.

As an optical multi-turn absolute encoder with an OptoASIC sensor, the A/790 is programmable up to 65,536 steps (16-bit) in 4,096 turns (12-bit), with Gray code or binary output via SSI serial interface with preset. It also supports Sine/Cosine output of 1024 ppr or incremental RS422 output of up to 16,384 pulses per turn, and, with the PR option, can be programmed via PC using USB or RS422 in ASCII code.

It has a Ø10 h7 stainless steel shaft with a radial/axial load capacity of 5 kg, impact resistance of 40 G (11 ms) and vibration resistance of 12 G (10–2000 Hz), and operates between -20 and +85 °C with a power supply of 10 to 30 V.

  • Programmable resolution up to 65536 steps in 4096 turns.
  • Serial interface SSI with Preset and additional incremental output RS422 up to 16384 pulses/turn.
  • Programmable (PR option) via PC software by USB, or via interface RS422 in code ASCII.
  • Impact resistance of 40 G (11 ms) already vibrations of 12 G (10–2000 Hz).

Technical Frequently Asked Questions

What interface does the A/790 use to transmit position?

A synchronous serial SSI interface with clock, address (DIR) and preset inputs, with RS422 output electronics. The value is transmitted starting from the most significant bit (MSB).

Can the encoder resolution be programmed?

Yes, with the Programmable (PR) option (max. 8192 div/revolution), the output code (Gray or Binary), resolution (up to the encoder's maximum physical resolution), preset value, and counting direction can be set using PC software connected via USB, or via an RS422 interface in ASCII code. The software and cable are available upon request.

What additional outputs does it support besides the SSI interface?

The A/790 supports Sin/Cos output of 1024 ppr (option S) or incremental RS422 output of up to 16384 pulses per revolution (options I1 to I5: 1024, 2048, 4096, 8192 or 16384).

Properties

FeatureSpecification
Mechanics
Weight750 g
AxisØ10 h7 stainless steel (optional Ø8, Ø12, Ø12.7 or on request)
max radial/axial load.5 kg
Electric
Exit-side protectionIP65 or IP66 according to connector
Exit codesGray, Binary (programmable)
Max resolution.65536 steps (16 bit)
max. number of turns.4096 (12 bit)
Feeding10–30 V
Max. consumption.200 mA
Maximum frequency (clock)500 kHz
Protection and environment
axle-side protectionIP65 standard · IP66 sealed
max. continuous RPM6000 standard · 3000 sealed (intermittent: +30 %)
Impact resistance40 G (11 ms)
Vibration resistance12 G (10–2000 Hz)
Temp. func. / warehousing.-20 … +85 °C / -30 … +85 °C
ReferenceConfiguration
A/790-MG-4096-1030-S1-PR-CV-RA790MG40961030S1PRCVRMultiturn · Gray · (B) · Resolution: 4096 · 10–30 V · SSI with Preset · Programmable (max. 8192 div/turn) · 1 m cable · IP65 · Output: R
Other combinations of resolution, power supply, electronics and connection are available upon request: please contact us and we will confirm the exact reference.
ELCIS A/790 Multi-Turn Absolute Encoder
Dimensional drawing of the ELCIS A/790 multi-turn absolute encoder

Related documentation, cases, and guides

Other products

Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Hollow shaft Ø4, Ø6 or Ø8 mm | Housing Ø46.5 mm | 1 to 5000 impedances/revolution | NPN, PNP, push-pull, line driver | Power supply 5–30 V | IP63 shaft (IP64 with Z) | Elastic coupling
ATESTEO LOGO, manufacturer of torque sensors
Digital Optical or Inductive | 100 – 1,000 N·m | 20,000 RPM | Titanium / Steel Rotor
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Square flange □80, centered Ø40 h7 | Shaft Ø10 h7 | 7 to 12 bit (up to 4096 steps) | Parallel, SSI RS422 or analog | 5, 15, 8–24 or 18–28 V | IP65 shaft (IP66 with Z option) | ATEX Ex d IIC T6
Monitran-Logo
Para las versiones con conector de 2 pines de los acelerómetros 2200/1100 y 2285/1185 | Toma MS de 2 pines a toma BNC pasamuros | Cable ETFE con sobremalla | 5 m
DPF Sensors logo
Vortex flowmeter with temperature and pressure compensation
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Thread Ø 0.9 mm, 8 m/s | Stroke up to 1500 mm | Incremental, resolution 0.1 or 1 mm | NPN, PNP, push-pull, 1 Vpp | 4–20 mA, 0–10 V or pot. 1kΩ | Power 5, 12, 24 V ±5 % or 8–30 V | IP64 encoder (IP53 mechanical)
DPF Sensors logo
INCLINOMETER RANGE (±) 10°/360°/ To be specified, 1 or 2 axes, PRECISION: ±0.2º, RESOLUTION: 0.1º, special solar sector.
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Pinion with 13, 16, or 34 teeth or Ø8 shaft | With pinion preload | Linear resolution 5 µm to 0.4 mm | 1 to 10,000 impedances/revolution | NPN, PNP, push-pull, driver, 1 Vpp | Power supply 5–30 V | IP66 shaft side
Monitran-Logo
Para las versiones con conector del acelerómetro 1186 | Toma 62GB de 3 pines a extremos libres | Cable de PVC de tres conductores | 5 m
Shopping Basket