CV-0x Flowmeter
Vortex flowmeter with temperature and pressure compensation
- Manufacturer: DPF Sensors
- Category: Caudal, SENSORS
The Vortex flowmeter works on the principle of the generated vortex and the relationship between the vortex and the flow according to the theory of Karman and Strouhal, who specialize in the measurement of steam, gas and lower viscosity liquids.
Pipe diameter: DN10-DN500
Accuracy: 1.0% 1.5%
Range ratio: 1:8
Ingress protection: IP65
Properties
Other products
Reference Torque Gauge | 20,000 – 30,000 N·m | 0 RPM | PCD Flange 218.0 mm | Inertia 0.1558 kg·m²
Precision tilt sensor with ranges from ±1…90º, 2 axes, output signal 4-20mA / 0-5 Vdc / RS485 / CanBus, ACCURACY: ±0.005º, RESOLUTION: 0.001º
I/63SC – Incremental Encoder Ø 63 mm, “servo-mount” for direct coupling, configurable resolution up to 25000 ppi
Salida 4-20mA DC | Rango 0-10 a 0-100 mm/s | Medida Velocidad RMS | Frecuencia 2Hz-1kHz | Alimentación 12-32V DC | Temp. -25 a 90°C | Protección IP67 | Acero Inoxidable | Base Aislada | Conexión Configurable
Bidirectional RS232 to TTL/CMOS converter (5V)
Salida Superior | Sensor de Velocidad Lineal | Sensibilidad 4mV/mm/s | Rango de Frecuencia 5Hz-4kHz | Salida AC | Temp. -55 a 140°C | Protección IP67 | Acero Inoxidable | Conector Militar 2-Pin | Base Aislada
ISOLATOR FOR ACTIVE COLLECTOR PASSIVE OUTPUT
Industrial inclinometer. Range 10º to 360º, 1 and 2 axes, Output signal 0.5-4.5 Vdc / 4…20 mA, CAN / RS485/ TTL / 422, Power supply 9…36 Vdc, IP67, Working temperature -40…+85ºC, accuracy ±0.2º
TDC, digital MEMS dynamic tilt sensor, can measure (roll ±180°, pitch ±180°, and azimuth ±180°) of a moving object. RS485 output signal. Withstands vibrations up to 2000g
PT100 TEMPERATURE PROBE with cable