Incremental Encoder for I/115C Motors

Budget-friendly price Request a quote
Hollow shaft Ø16 H7 | B10 flange Ø115 mm | 1 to 3600 imp/rev | NPN, PNP, push-pull, driver, 1 Vpp | Power supply 5–30 V | IP64 shaft (IP66 Z-seal) | 100 kHz (300 kHz optional)

The ELCIS 115C (I/115C) is an incremental encoder with a Ø16 H7 hollow shaft and a standardized Ø115 mm B10 flange, offering 1 to 3600 pulses per revolution. It is designed for mounting on the shaft of large motors.

Anodized aluminum base and cover and hollow Ø16 H7 stainless steel shaft, weighing 1700 g. High MTTFd according to UNI EN ISO 13849-1. IP64 protection rating on the shaft side (IP66 with sealed bearings Z, IP53 with low torque bearings B); on the output side, depending on the connection.

From 1 to 3600 pulses per revolution, max. frequency of 100 kHz (300 kHz optional) and 5÷30 V power supply. Connection by 1 mu cable or other length nm (order code 01 on), connectors, cable end connector or terminal box.

  • B10 Flange Ø115 mm: centering Ø85 h7 and Ø6.5×6 drills at 60° on Ø100 mm.
  • Hollow shaft Ø16 H7Made of stainless steel; max. radial/axial load 18 kg.
  • Output electronics: NPN, PNP, push-pull, line driver 26LS31 and 88C30, TTL 7404, discriminator or sinusoidal 1 Vpp.
  • Sealed and low torque: IP66 with option Z (3000 rpm max.); IP53 with option B (8000 rpm max.).

Technical Frequently Asked Questions

What type of flange does the I/115C encoder use?

B10 flange of Ø115 mm with front centering of Ø85 h7.

What are the characteristics of the I/115C model axle?

Hollow stainless steel shaft Ø16 H7, with max. radial/axial load of 18 kg.

What levels of water tightness are available?

IP64 on the shaft side in the standard version, IP66 with option Z (sealed bearings), and IP53 with option B (low-torque bearings). On the output side, it depends on the connection: IP65 cable, IP63 to IP67 connectors, MS IP00 terminal box.

Properties

FeatureSpecification
Mechanics
HousingB10 flange Ø115 mm, centered Ø85 h7 (anodized aluminum) (customizable upon request)
Weight1700 g
AxisHollow shaft Ø16 H7 stainless steel (customizable upon request)
max. axial/radial load.18 kg
Electric
Exit-side protectionAccording to connection (IP00 to IP67)
Feeding5÷30 V according to code
Max. consumption.120 mA (standard) / 180 mA (line driver) (customizable upon request)
Impulses per lap1 to 3600
Max frequency.100 kHz (300 kHz optional)
Output electronicsNPN, PNP, push-pull, line driver, TTL, discriminator, sine 1 Vpp
Protection and environment
axle-side protectionIP64 standard (IP66 sealed Z, IP53 under torque B)
max. continuous RPM6000 rpm (standard) / 3000 rpm (Z) / 8000 rpm (B)
Impact resistance50 G × 11 ms
Vibration resistance12 G (10 ÷ 2000 Hz)
Operating temperature0 … +70 °C (customizable upon request)
ReferenceConfiguration
I/115C-3600-824-BZ-B-CV-R-01I115C3600824BZBCVR013600 pulses/revolution · 8 ÷ 24 V · bidirectional with zero · Push-pull PRO · IP65 · length 1 m (01) onm (n) · radial output · cable length: 01
I/A115C-1024-18285-BZ-N-CV-R-02IA115C102418285BZNCVR02High temperature · 1024 pulses/revolution · 18 ÷ 28 / 5 V · Bidirectional with zero · Driver 26LS31 · IP65 · Length 1 m (01) onm (n) · Radial output · Cable length: 02
I/A115C-1500-18285-BZ-N-CV-R-02IA115C150018285BZNCVR02High temperature · 1500 pulses/revolution · 18 ÷ 28 / 5 V · Bidirectional with zero · Driver 26LS31 · IP65 · Length 1 m (01) onm (n) · Radial output · Cable length: 02
Incremental encoder for ELCIS I/115C motors
Dimensional drawing of the incremental encoder for ELCIS I/115C motors

Related documentation, cases, and guides

Other products

Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Adjustable metal supports | Stroke 50–1000 mm | 5 kΩ (≤600 mm), 10 kΩ (≥750 mm) | Linearity <±0.07 % | Potentiometric output (divider) | Max. supply 60 V | IP50 · shaftless · DIN 43650
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Flange Ø90, shaft Ø12 h7 | SSI with preset, RS422 | Up to 65536 steps (16 bits) | Gray or binary programmable | 10–30 V | IP66 shaft (IP67 sealed) | Optional Sin/Cos 1024 or RS422 16384 ppr
Monitran-Logo
Isolated AC speed output | 4 mV/mm/s | 5 Hz to 4 kHz ±5% | Constant current 0.5 to 8 mA | -25 to 140 °C | 2-pin C5015 connector | Stainless steel, IP67
Official logo of Novotechnik, manufacturer of linear sensors, position transducers, and industrial encoders
SPI, TTL level, binary code | Ø 28 mm | 16-bit resolution | Ø 6 mm spindle or push-in coupling | 5 VDC (4.5 … 5.5 VDC) | IP54 / IP65 / IP67 | 14 or 16 turns (up to 5760°)
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Ø58 mm, servo, Ø10 h8 shaft | Up to 25 bits in 4096 revolutions | Parallel or parallel with preset | Push-pull 20 mA | 10–30 V power supply | IP64 shaft (IP66 sealed) | Step frequency 200 kHz
Monitran-Logo
Probe and driver in IP65 die-cast aluminum housing | Linear range 0 – 2 mm | Sensitivity 8 mV/µm nominal | DC to 10 kHz | Linearity 1% nominal | Power supply 24 V DC at 30 mA | Probe operating temperature -30 to 180 °C
Official logo of Novotechnik, manufacturer of linear sensors, position transducers, and industrial encoders
Ratiometric output 0.25…4.75 V | Ø 22mm | Resolution 16 bits | Shaft Ø 6 mm | 5 VDC (4.5 … 5.5 VDC) | IP50/IP65 | Measurement range: 44 turns (15840°)
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Square flange □63.5, shaft Ø9.52 h7 | Up to 8192 steps (13 bits) | Parallel, SSI or analog (mA or V) | 5, 15, 8–24, 18–28 or 10–30 V | IP65 shaft (IP66 sealed) | Gray, Binary, Excess or BCD
B&C Electronics – Italian manufacturer of industrial water sensors and analyzers
Conductivity range from 0 to 20 mS/cm. Output 4/20mA
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
B10 flange Ø115, centered Ø85 h7 | Shaft Ø10 h7 | 7 to 12 bit (up to 4096 steps) | Parallel, SSI RS422 or analog | 5, 15, 8–24 or 18–28 V | IP65 shaft (IP66 with Z option) | ATEX Ex d IIC T6
Shopping Basket