Linear Potentiometer RPF

Budget-friendly price Request a quote
Adjustable metal supports | Stroke 50–1000 mm | 5 kΩ (≤600 mm), 10 kΩ (≥750 mm) | Linearity <±0.07 % | Potentiometric output (divider) | Max. supply 60 V | IP50 · shaftless · DIN 43650

The ELCIS RPF is a shaftless linear potentiometer with a stroke of 50 to 1000 mm and a resistance value of 5 kΩ (strokes of 50 to 600 mm) or 10 kΩ (strokes of 750 to 1000 mm). It is characterized by its minimal installation length, compared to the RPC, which does have a shaft. It has a potentiometric output (voltage divider) proportional to the cursor position. Applications indicated by the manufacturer include: hydraulic and pneumatic cylinders, plastic molding, packaging, textile machinery, etc.

The cursor has a bearing that reduces the effects of misalignment with the actuating part.

Available in stroke lengths from 50 mm to 1000 mm, with resistive values of 5 kΩ or 10 kΩ and linearity < ±0.07% (0.05% from 425 mm). It connects via a DIN 43650 IP65-ISO 4400 swivel connector. It must be used as a voltage divider. Maximum wiper current is 1 mA; < 1 µA is recommended for use as a voltage divider. If the downstream system requires more current, an additional circuit will be necessary. Weight ranges from 521 to 1693 g depending on the stroke; other lengths are available upon request.

Connecting to a PLC: signal converters

ELCIS specifies that the RPF should operate as a voltage divider with a maximum cursor current of 1 µA, and that if the system reading the signal requires more current, an additional circuit is needed. The output is ratiometric: it depends on the cursor position and the voltage supplied to the trace. To supply this to a PLC as 4–20 mA or 0–10 V, a converter with a 3-wire potentiometric input is inserted, which supplies the trace with a stable voltage and reads the cursor.

For the resistive values of the RPF (5 and 10 kΩ): DPF POSI Plus (input 500 Ω to 500 kΩ, excitation 2.5 V, isolated universal power supply 20 to 250 V AC/DC, output 4–20 mA or 0–10 V) and DPF POSI Trio (3 channels, 1.5 to 500 kΩ, 5 MΩ input). More options in the category Resistance and Potentiometers.

  • Potentiometric output (voltage divider), proportional to the cursor position.
  • Shaftless structure with minimum installation length.
  • Sliding cursor with bearing which reduces the effects of misalignment.
  • Max. operating speed. 10 m/s and useful life of more than 100 × 10⁶ cycles.
  • Resistive element of conductive plastic with infinite resolution and linearity ±0.07 % (0.05 % from 425 mm).

Technical Frequently Asked Questions

What technical differences does the RPF model present compared to other axle-based models?

It is characterized by the absence of a shaft (mod. RPC) and by its minimum installation length.

How does the RPF cursor react to misalignment?

The cursor has a bearing that reduces the effects of misalignment with the drive part. The drawing shows the coupling joint with an angular travel of +10° / -10°.

What races and endurance events does the RPF series cover?

It covers strokes from 50 mm to 1000 mm, with 5 kOhm up to 600 mm and 10 kOhm from 750 mm.

Properties

FeatureSpecification
Mechanics
Standard stroke50 to 1000 mm (see technical specifications)
Housing and mountingAnodized aluminum • Nylon 66 fiberglass-reinforced cable ties • Adjustable metal brackets
Weight521 to 1693 g (see technical specifications)
Electric
Resistive value5 kOhm (strokes 50 to 600 mm) · 10 kOhm (strokes 750 to 1000 mm), ±20 %
Resistive elementConductive plastic
Linearity< ± 0.07 % (see technical specifications)
Resolution and repeatabilityInfinite · < ± 0.013 mm
Food and consumption60 V max. · 3 W to 10 W
Max currents.Cursor max. 1 mA (recommended < 1 µA as a voltage divider) · Resistance ≤ 10 mA
Insulation and corrugationResidual current < 5 µA at 500 V (1 min) · Output ripple < ± 0.1 % with respect to input voltage
Protection and environment
ProtectionIP50 (standard)
Speed and starting forceMax speed 10 m/s • Starting force ≤ 2 N standard
Shelf life> 100 × 10⁶ cycles
Impact, vibration and temperaturesImpact 10 G • Vibration: 40 G • Operating Temperature: -30 to +100 °C • Storage Temperature: -50 to +120 °C
Other features
Electrical connectionAdjustable connector DIN 43650 IP65-ISO 4400
ReferenceConfiguration
L/RPF-50-05LRPF5005stroke 50 mm · 5 kOhm
L/RPF-50-10LRPF5010stroke 50 mm · 10 kOhm
L/RPF-75-05LRPF7505stroke 75 mm · 5 kOhm
L/RPF-75-10LRPF7510stroke 75 mm · 10 kOhm
L/RPF-100-05LRPF10005stroke 100 mm · 5 kOhm
L/RPF-100-10LRPF10010stroke 100 mm · 10 kOhm
L/RPF-130-05LRPF13005stroke 130 mm · 5 kOhm
L/RPF-130-10LRPF13010stroke 130 mm · 10 kOhm
L/RPF-150-05LRPF15005stroke 150 mm · 5 kOhm
L/RPF-150-10LRPF15010stroke 150 mm · 10 kOhm
L/RPF-175-05LRPF17505stroke 175 mm · 5 kOhm
L/RPF-175-10LRPF17510stroke 175 mm · 10 kOhm
L/RPF-200-05LRPF20005stroke 200 mm · 5 kOhm
L/RPF-200-10LRPF20010stroke 200 mm · 10 kOhm
L/RPF-225-05LRPF22505stroke 225 mm · 5 kOhm
L/RPF-225-10LRPF22510stroke 225 mm · 10 kOhm
L/RPF-250-05LRPF25005stroke 250 mm · 5 kOhm
L/RPF-250-10LRPF25010stroke 250 mm · 10 kOhm
L/RPF-275-05LRPF27505stroke 275 mm · 5 kOhm
L/RPF-275-10LRPF27510stroke 275 mm · 10 kOhm
Other combinations of resolution, power supply, electronics and connection are available upon request: please contact us and we will confirm the exact reference.
ELCIS RPF Linear Potentiometer
Dimensional drawing of the ELCIS RPF linear potentiometer

Related documentation, cases, and guides

Other products

Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
PROFIBUS-DP Class 2, 12 Mbaud | Hollow shaft Ø10 H7, housing Ø90 | Internal star coupling | 16-bit; 30-bit at 16384 turns | 10–30 V DC | IP65 shaft (IP66 sealed)
DPF Sensors logo
TSM-xxx Series
ATESTEO LOGO, manufacturer of torque sensors
Strain Gauges | 500 N·m – 5,000 N·m | 25,000 RPM | PCD Flanges 84.0 – 196.0 mm
Official logo of Novotechnik, manufacturer of linear sensors, position transducers, and industrial encoders
IO-Link | Ø 30 mm | 16 bits per revolution | Shaft Ø 6 mm | 24 VDC (16 … 30 VDC) | IP54 … IP67 | Measuring range: 44 revolutions (15840°)
Digital pressure gauge
NESA Environmental Meters
6 real-time parameters | RS485 or USB (with IS485/USB module) | pH 0÷14 | Level 0÷20 m / 0÷50 m | -5 ÷ +60°C | 10.8 ÷ 16Vdc | 512 x 70 mm
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Hollow shaft Ø16 H7 | B10 flange Ø115 mm | 1 to 3600 imp/rev | NPN, PNP, push-pull, driver, 1 Vpp | Power supply 5–30 V | IP64 shaft (IP66 Z-seal) | 100 kHz (300 kHz optional)
Monitran-Logo
4-20 mA ∝ rms speed | 0-10 to 0-100 mm/s | 2 Hz to 1 kHz ±10 % | Ex ia I Ma | Ui 28 V · Ii 93 mA · Pi 0.65 W | 12-32 V DC | Stainless steel, IP67 | Group I (mining)
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Absolute, wire diameter 0.9 mm | Stroke up to 3 m | Resolution 0.1 or 1 mm | SSI, Gray or binary; preset S1/S4 | 10–30 V DC | IP64 (IP65 connectors) | Linearity ±0.05 % fs.
Dimetix_AG-1
For travel distances of a few meters and up to ~50 m, with typical accuracy of ±1 mm @2σ, 100 Hz and extended thermal range of -40 to +60 °C.
Shopping Basket