SPIDER rockfall warning device

Budget-friendly price Request a quote
Rockfall alert | 1 to 8 electromechanical sensors | SigFox / LoRa 868/915MHz radio | 5-year lithium polymer battery | -40 to +60°C | Ø 30cm | CE

The NESA SPIDER device is an alert device for protection systems such as rockfall barriers and adhesion nets. It detects events (rockfall, stress, failure) in a single network module or in blocks of modules, even from different directions, with 1 to 8 electromechanical detection sensors and a series of redundant electronic sensors.

Minimum sensitivity 100N, response time < 5s, LPWan, SigFox or LoRa 868/915MHz radio, internal GPS, standard AA type lithium polymer battery with 5-year autonomy, -40 ÷ +60°C, ergal and aluminum alloy, 8Kg, 30cm.

Key points

  • Sensors: 1 to 8 electromechanical detection sensors and a series of redundant electronic sensors
  • Minimum sensitivity 100N, depending on the energy level per minimum barrier category; response time < 5 s
  • Barrier category: ETAG – EOTA classification from 0 to 8 classes for SEL and MEL
  • Frequency 868MHz (Europe) – 915MHz outside Europe; LPWan, SigFox or LoRa radio
  • Transmission via SigFox network, or via proprietary protocol or LoRa to a concentrator at a maximum distance of 4-5 km, with automatic switching between both systems
  • «Alive» signal with daily frequency; information transmitted: alarm status, device status, battery level and position
  • Features: automatic false alarm reset, mechanical memory of key events, functional test, and internal GPS
  • Standard AA type lithium polymer battery, 5-year autonomy; -40 ÷ +60°C; ergal and aluminum alloy; 8 kg; 30 cm; CE

Technical Frequently Asked Questions

What sensors does it have?

1 ÷ 8 electromechanical detection sensors and a series of redundant electronic sensors. Minimum sensitivity 100N, depending on the energy level per minimum barrier category; response time < 5 s.

How does it transmit data?

Via LPWAN, SigFox, or LoRa 868/915MHz radio: over a SigFox network, or via proprietary protocol or LoRa to a concentrator up to 4-5 km away, with automatic switching between the two systems. The concentrator transmits via cable, fiber, GPRS/UMTS, or satellite.

How does it feed?

With a standard AA type lithium polymer battery, with a 5-year autonomy.

Properties

FeatureSpecification
Product and detection
Product typeWarning device for protection systems: rockfall barriers and adhesion nets
Events detectedDetachment, effort, failure
Sensors1 ÷ 8 electromechanical detection sensors
Electronic sensorsRedundant electronic sensor array
Sending the alarm from a sensorManaged redundantly
Minimum sensitivity100N, according to the energy level per minimum barrier category
Response time< 5 s
Category of barriersAdhesion nets and barriers provided for by the ETAG – EOTA standard: classification of rockfall barriers according to service energy, from 0 to 8 classes for SEL and MEL
StandardsTechnical Standards for Construction 2018 – Geotechnical Project on the Need to Verify the Performance of Works. Guidelines for Planning Activities to Combat Hydrogeological Risk – Presidency of the Council of Ministers – September 2017
Functions
False alarmsAutomatic Re-entry
Mechanical memoryOf the most important events
Functional testPossible
Event PositionInternal GPS, with mapping of the areas under alert (cadastre)
Transmission
Frequency868MHz (Europe) – 915MHz outside of Europe
Radio technologyLPWan, SigFox or LoRa 868/915MHz
Radio coverageSeveral kilometers from the transmission point
SigFox transmissionSigFox network with at least three existing radio bridges
Transmission via proprietary protocol or LoRaConcentrator at a maximum of 4-5 km from the transmission point
Transmission from the concentratorCable, fiber, GPRS/UMTS, satellite
Protocols from the concentratorStandard (FTP, SFTP) or specific (ANAS)
Hub functionLocal control of traffic lights or hazard signs
Switching between both systemsAutomatic, for maximum redundancy
Status and control information«Alive» signal with daily frequency
Information transmittedAlarm status, device status, battery level, and position
Message contentDevice identifier, date, time, sensor status, alarm status, battery level, GPS position
Normal stateOne «alive» message per day
State of alarmMessage sent continuously until it returns to normal (if the event was elastic) or until the batteries run out and it rearms
Power supply, environment, and mechanical data
FeedingStandard AA type lithium polymer battery
Autonomy5 years
Operating conditions-40 to +60°C
MaterialErgal and aluminum alloy
Weight8Kg
Diameter30cm
Regulatory complianceEC
NESA SPIDER landslide warning device
Dimensions of the NESA SPIDER rockfall warning device

Other products

Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Through-hole shaft Ø30–50 H7 | Ø170 h5, anti-rotation pin | 18000–90000 imp/rev | NPN, PNP, push-pull, driver, TTL | 5–30 V | IP65 shaft (IP66 sealed) | 100 kHz (500 kHz optional)
DPF Sensors logo
Indoor CO2, humidity and temperature sensor with ModBus RS485 communication
NESA Environmental Meters
RS485 | Water film 0–4 mm | Dry / Damp / Wet / Ice / Snow | IP68 | -30–+70°C | 120 x 50 mm
NESA Environmental Meters
K-band radar <25GHz | 0÷20 m | 0.01% fs (±2 mm) | 4÷20mA | Current loop or 10÷28 Vdc | IP66 – IP68 (0.2 bar) | 285 x 72 mm
Dimetix_AG-1
Dynamic Industrial Communication Extension Module for DIN Rail Range: Effective range of the data bus extended up to 1200 meters (1.2 Km)
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Metal housing Ø50 mm | Stainless steel shaft Ø8 mm | 10 to 2500 pulses/revolution | NPN, push-pull or line driver | 5 V ±5 % or 12–24 V | IP52 shaft, IP65 output | Max. frequency 180 kHz
Official logo of Novotechnik, manufacturer of linear sensors, position transducers, and industrial encoders
CAN SAE J1939 | Ø 30 mm | 16 bits per revolution | Shaft Ø 6 mm | 12/24 VDC (8 … 32 VDC) | IP54 … IP67 | Measuring range: 44 revolutions (15840°)
Dimetix_AG-1
Extra Large Laser Reflection Sheet for Structural Customization Range: Extended extreme measurement scalability up to 500 meters
ATESTEO LOGO, manufacturer of torque sensors
Inductive (Dual-Frequency) | 500 N·m – 4,000 N·m | Up to 40,000 RPM | PCD Flange 105.0 mm
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Ø11 h7 stainless steel spindle | Up to 65536 steps × 4096 revolutions | SSI with preset, Gray or binary | Optional Sin/Cos 1024 or RS422 16384 ppr | 10–30 V power supply | IP64 spindle (IP66 sealed) | Optional spindle diameters: Ø6, 8, 9.52 or 10
Shopping Basket