S parts (replacement cursors)
Budget-friendly price Request a quote
4 cushioned fingers | Contact force 0.14 N | Shaft Ø 3 mm and Ø 6 mm
- Manufacturer: Novotechnik
- Category: Novotechnik Accessories
Novotechnik S Parts. Replacement cursor assemblies for PRS-25, PRS-45 and PRS-65 resistive elements.
Technical Frequently Asked Questions
What sensors are the S parts used with?
They are used with PRS (planar rotating resistive element).
What types of S parts are there?
These types are available: cushioned replacement cursor for Ø 3 mm shaft (S-094) and cushioned replacement cursor for Ø 6 mm shaft (S-098 and S-152).
How do I order S parts?
For example, S-094 (Art. 400070137): cushioned replacement slider for Ø 3 mm shaft, Ø 3 mm shaft g5 (Rz 1), 0.14 ± 0.04 N (4 fingers). All order references with their corresponding Art. are listed in the reference table on this page.
Properties
| Feature | Specification |
|---|---|
| S-094 · Cushioned replacement cursor for Ø 3 mm shaft | |
| Required axis | Shaft Ø 3 mm g5 (Rz 1) |
| Contact force | 0.14 ± 0.04 N (4 fingers) |
| Adjustment force | 80 … 250 N |
| It is used with | PRS |
| S-098 · Cushioned replacement cursor for Ø 6 mm shaft | |
| Required axis | Shaft Ø 6 mm g5 (Rz 1) |
| Contact force | 0.14 ± 0.04 N (4 fingers) |
| Adjustment force | 200 … 360 N |
| It is used with | PRS |
| S-152 · Cushioned replacement cursor for Ø 6 mm shaft | |
| Required axis | Shaft Ø 6 mm g5 (Rz 1) |
| Contact force | 0.14 ± 0.04 N (4 fingers) |
| Adjustment force | 200 … 360 N |
| It is used with | PRS |
| Reference | Configuration |
|---|---|
| S-094S094 | Art. 400070137 · Cursor type: Cushioned replacement cursor for Ø 3 mm shaft · Shaft required: Ø 3 mm g5 (Rz 1) shaft · Contact force: 0.14 ± 0.04 N (4 fingers) · Drawing force: 80 … 250 N · Supply: 1 pc. |
| S-098S098 | Art. 400070138 · Cursor type: Cushioned replacement cursor for Ø 6 mm shaft · Shaft required: Ø 6 mm g5 (Rz 1) shaft · Contact force: 0.14 ± 0.04 N (4 fingers) · Drawing force: 200 … 360 N · Supply: 1 pc. |
| S-152S152 | Art. 400070139 · Cursor type: Cushioned replacement cursor for Ø 6 mm shaft · Shaft required: Ø 6 mm g5 (Rz 1) shaft · Contact force: 0.14 ± 0.04 N (4 fingers) · Drawing force: 200 … 360 N · Supply: 1 pc. |
Related documentation, cases, and guides
Technical documentation
- Novotechnik General Catalogue: Linear and Angular Position Sensors
- Technical definitions of potentiometers: linearity, RGV and hysteresis
- Novotechnik position sensors with IO-Link interface
- Position sensors for valves and actuators: Novotechnik series
- Novotechnik linear and rotary sensors for automotive applications
Other products
Output 4 … 20 mA or 0 … 20 mA | Electrical stroke 10 mm | Linearity ±0.1 … ±0.4 % | Return stem | 18 … 30 VDC | IP50 or IP67 | 2 m cable
Voltage divider | Profile 18 x 18 mm | Stroke 25 … 150 mm | Linearity ±0.05 … ±0.2 % | Repeatability ±0.002 mm | IP40 | Cable, connector M8 or M16
Inductive, contactless | Output 0.1 … 10 V or 4 … 20 mA | Stroke 100 … 1000 mm | Linearity ≤ ±0.025 % FS (min. ±100 µm) | Resolution 10 / 20 µm | 18 … 32 VDC | IP67
Magnetostrictive, non-contact | CANopen DS-406 | Stroke 50 … 2000 mm | Linearity ≤ ±0.04 % FS (min. 300 µm) | Resolution ≤ 0.1 mm | 12/24 VDC (8 … 34 VDC) | 350 bar · IP67
Potentiometer input 0.5…100 kΩ | Output 0…10 V or 4…20 mA | Power supply 18…30 VDC | Typical linearity 0.1 % | Temperature coefficient 25 ppm/°C | DIN rail 35 mm | IP20
Output ±10 VDC | Defined stroke 5 … 20 mm | Linearity ±0.1 … ±0.3 % | 24 VDC ±20 % | IP67 with EEM 30-70 connector
-40 … +125 °C (Z-RFC) | Offset up to ±4 mm | Encapsulated magnet
Potentiometric output | Stroke 50 … 750 mm | Linearity ±0.04 … ±0.2 % | Resolution < 0.01 mm | 42 VDC max. | IP65 | M12 connector or cable
Voltage divider | Ø 28 mm | Shaft Ø 6 mm or push-in coupling | Max. Ub 42 VDC | IP54 or IP65 | 100° to 345°, 1 or 2 channels
Analog voltage output | Shaft Ø 6 mm | 3 M4 threaded holes | Max. Ub 42 V | IP40 | 3, 5 or 10 turns