DPK900, miniature stations
DPK900 Compact Weather Station
- Manufacturer: DPF Sensors
- Category: Complete weather stations, SENSORS, Weather sensors
The compact DPK900 station can simultaneously measure temperature, humidity, air pressure, wind speed and direction, solar radiation, illumination/UV, dust concentration and precipitation.
Properties
The parameters measured are:
- Wind
- Temperature
- Humidity
- Pressure
- Solar radiation
- Precipitation
- GPS
Exit sign: RS-485 / SDI12
3 STATION VERSIONS:
M6: | Wind direction and speed, temperature, humidity and atmospheric pressure |
M6: | Wind direction and speed, temperature, humidity and atmospheric pressure + rain |
M9: | Wind direction and speed, temperature, humidity and atmospheric pressure + rain + solar radiation, luminance, dust particle concentration |
Other products
Outer diameter Ø36.5 mm | Mounting via servo-type flange or front screws | 12-bit single-turn (4096 steps/rotation) | Multi-turn up to 25-bit (8192 rotations) | Synchronous serial output SSI, line driver via RS422 | Clock frequency from 100 kHz to 2 MHz | Stainless steel shaft Ø6 h6 | Maximum continuous speed of 12000 rpm | IP64 on the shaft side; temperature from -30 to +85 °C | Power supply from 10 to 30 VDC
Housing Ø68 mm | Servo mounting via clamps | Ø6 h7 stainless steel shaft | 1 to 10000 pulses/revolution | Max. frequency 100 kHz | Power supply 5–30 V | Outputs NPN, PNP, push-pull, line driver, TTL and sinusoidal | IP64 shaft side (IP66 sealed) | 6000 rpm continuous | Weight 300 g
Very robust, Ø59 mm | Collar mounting | Internal tangential coupling | Hollow shaft Ø6 to Ø15 mm in stainless steel | Max. frequency 100 kHz (300 kHz optional) | Resolution 1 to 25000 imp/v | Aluminum base and Valox 420 cover | Weight 290 g | IP65 on the shaft side (IP66 sealed) | Outputs NPN, PNP, push-pull, line driver and 1 Vpp sinusoidal
Power supply 5V to 30V | Shaft Ø15÷30mm Stainless Steel | Push-Pull Pro Output | IP65 Protection | Weight 650g | Starting Torque >200 g·cm | Maximum Continuous RPM 1000 | Bearing Life 1.5×10⁹ rev | Impact Resistance 50G | Temperature 0÷70°C
Hollow shaft H7 from Ø12 to Ø16 mm | Torque or pivot support | Housing Ø104 mm | 100 to 2048 pulses/revolution | Max. frequency 120 kHz | Power supply 5–30 V | Operating temp. -20 … +85 °C | IP65 shaft side (IP66 sealed) | 6000 rpm continuous | ATEX 3 · CE Ex II 3GD
Short-stroke potentiometric transducer with direct analog output for PLC, strokes from 25 to 150 mm and versions with stem or spring-loaded probe
Inductive (Dual-Frequency) | 10,000 N·m | 12,000 RPM | PCD Flange 196.0 mm
ISOLATOR FOR ACTIVE COLLECTOR PASSIVE OUTPUT
Industrial resistive displacement sensor, range from 50 mm to 1250 mm
Temperature and humidity transmitter. For ambient and duct use. Output signal: 4-20 mA, 0-10 VDC, and RS485.