DPK300.x
Dust concentration sensor
- Manufacturer: DPF Sensors
- Category: Gases - Particles, Meteorology – Climatology, SENSORS, Gas Sensors
The DPK300.x dust sensor uses the principle of laser scattering and detects the existence of concentration of dust particles in the air, the minimum it can detect is 1.0 µm particles.
Possible ranges: PM1.0, PM2.5, PM10, PM2.5 + PM10, PM1.0 + PM2.5 + PM10
Output signal 4-20mA, 0-10V, Rs485
Properties
Other products
Rain gauge Collection diameter 400cm2 maximum measurable intensity 300mm/h.
100% Digital Optical | 50 – 1,000 N·m | 30,000 RPM | Titanium Rotor
AC/DC current ammeter relay (16A). Overload and underload, 2 relays
Isolator for passive pickups. Passive output: 4/20 mA, input: 4/20 mA (for passive pickup) – 2 channels
Top Output | Sensitivity 100mV/g | Frequency 2Hz-10kHz | Range ±80g | IEPE Power Supply | Temp. -55 to 140°C | IP67 Protection | Stainless Steel | Insulated Base | 2-pin Connector Mil-C-5015
Ultrasonic level sensor, range up to 10 meters, RS485/4-20 mA/0-5 Vdc output signal.
Operating temperature 0 … +70 °C | Servo flange | Metal housing Ø41 mm | Front centering Ø34.92 h7 | Solid shaft Ø6.35 h7 | 1 to 2540 pulses/revolution | Max. response frequency 60 kHz | Power supply 5÷30 V | Protection up to IP66 | Weight 120 g
3-way isolator: 0/10V input, isolated excitation (24V/20mA), isolated 0/10V output, isolated 24VDC (20.. 30V) power supply * 2 channels *
Ø90 mm flange with servo mounting | Resolution 2²⁴ in 4096 revolutions | Gray / Binary / BCD codes | Parallel or SSI interface | Power supply 5 V / 8–24 V / 18–28 V | Ø12 h7 stainless steel shaft | Max. load 7 kg | IP64 shaft side (IP65 sealed) | 4000 rpm continuous | Weight 1300 g
Adapts the pulse signal from a Namur sensor to a PNP/NPN transistor