LR20 Radar Level Sensor

Budget-friendly price Request a quote
K-band radar <25GHz | 0÷20 m | 0.01% fs (±2 mm) | 4÷20mA | Current loop or 10÷28 Vdc | IP66 – IP68 (0.2 bar) | 285 x 72 mm

The NESA LR20 is a K-band radar water level sensor from the VEGAplus series, featuring a microwave transducer housed in a resin body. It is used for measuring water levels in open fields or stilling basins and is a programmable hydrometer and nivometer.

Typical range 0÷20 m (also 0÷15, 0÷35 and 0÷75 m), sensitivity 1 mm, accuracy 0.01% fs (±2 mm), response time < 1 s and typical beam angle 5°. Output 4÷20mA (LR20-B), resin housing IP66 – IP68 (0.2 bar).

Key points

  • Typical range 0÷20 m; other ranges 0÷15 m, 0÷35 m, 0÷75 m
  • Sensitivity 1 mm; accuracy 0.01% fs (±2 mm); response time < 1 s
  • K-band radar (<25GHz); typical beamwidth 5°
  • 4÷20mA output; with MCS module (optional) 0÷2Vdc (A) or RS485 / Modbus (C)
  • Power supply: current loop or 10–28 Vdc; protections against reverse polarity and transients
  • Operating conditions -40 ÷ +80°C; resin housing IP66 – IP68 (0.2 bar); 285 x 72 mm; <350 g; CE

Technical Frequently Asked Questions

What is its range and accuracy?

Typical range 0÷20 m; also 0÷15, 0÷35 and 0÷75 m. Accuracy 0.01% fs (±2 mm) and sensitivity 1 mm.

What kind of outlet and power supply does it have?

4÷20mA output (LR20-B), with MCS module (optional) 0÷2Vdc (A) or RS485 / Modbus (C). Power supply: current loop or 10÷28 Vdc.

What level of protection does it have?

IP66 – IP68 (0.2bar) resin enclosure, with protection against reverse polarity and transients.

Properties

FeatureSpecification
Measurement and operating principle
Measured magnitudeWater level
Transducer typeK-band radar (<25GHz)
Typical range0÷20 m
Other ranges0÷15 m, 0÷35 m, 0÷75 m
Sensitivity1 mm
Accuracy0.01% fs (±2 mm)
Response time< 1 s
Beam aperture (typical)5°
Regulatory complianceEC
Exit signals
Output signal (LR20-B)4÷20mA
With MCS module (optional)0÷2Vdc (A) or RS485 / Modbus (C)
Power supply, environment, and mechanical data
Food and consumptionCurrent loop or 10÷28 Vdc
Operating conditions-40 to +80°C
ProtectionsAgainst polarity reversal and transients
BoxIP66 – IP68 resin (0.2 bar)
Dimensions285 x 72 mm (see drawing)
Weight<350g
ReferenceConfiguration
LR15-BLR15BRange: 0-15 m · Output: 4-20 mA · Supplied with: Calibration report and 5 m cable
LR20-BLR20BRange: 0-20 m · Output: 4-20 mA · Supplied with: Calibration report and 5 m cable
LR35-BLR35BRange: 0÷35 m · Output: 4÷20mA · Supply: With calibration report
NESA LR20 Radar Level Sensor
Dimensions of the NESA LR20 radar level sensor

Other products

Dimetix_AG-1
Non-contact measurement and positioning up to 100 m over natural surfaces and 500 m with reflector, with typical accuracy of ±1 mm and measurement speed of up to 250 Hz.
Official logo of Novotechnik, manufacturer of linear sensors, position transducers, and industrial encoders
Inductive, contactless | SSI 24 and 25 bit | Stroke 100 … 1000 mm | Resolution 1, 5 or 10 µm | Linearity ≤ ±100 µm | 18 … 32 VDC | IP67
Official logo of Novotechnik, manufacturer of linear sensors, position transducers, and industrial encoders
IO-Link | Ø 30 mm | 16 bits per revolution | Shaft Ø 6 mm | 24 VDC (16 … 30 VDC) | IP54 … IP67 | Measuring range: 44 revolutions (15840°)
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Section 18×54 mm | Stroke 70–2440 mm | Resolution 5, 1 and 0.5 µm (x4) | Line driver output (VD) | Power supply 5 V ±5 % | IP53 (IP64 with compressed air) | Accuracy ±10 µm (opt. ±5 µm)
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
CANopen (C2) or fiber optic (CF) | Ø59 mm, servo-type mounting | Hollow shaft Ø15 F7 with coupling | 16 bit; 30 bit at 16384 turns | 10–30 V DC | IP64 shaft (IP66 sealed)
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Through shaft Ø6, 8, 10, 12 or 15 mm | Housing Ø59 mm | 1 to 50000 imp/revolution | NPN, PNP, push-pull, driver, 1 Vpp | Power supply 5–30 V | IP64 shaft (IP65 Z-seal) | Elastic coupling
DPF Sensors logo
Submersible pressure level sensor, up to 150 meters of water column
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Ø59, hollow shaft Ø15 F7 | Elastic coupling | Up to 65536 steps (16 bits) | SSI, RS422/RS485 | 10–30 V | IP64 shaft (IP66 sealed) | Gray or binary
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Servo mounting Ø58, shaft Ø6 f6 | 360, 4096, 8192 or 65536 steps | Parallel, push-pull 20 mA | 10–30 V | IP64 shaft (IP66 sealed) | Gray or binary | Optional preset (P1)
Disibeint Electronic, manufacturer of level sensors and control relays
MAGNETIC LEVEL SWITCHES · FIXED LENGTH
Shopping Basket