High-temperature accelerometer up to 250 °C Monitran MTN/1105C

Budget-friendly price Request a quote
Load output 50 pC/g (100 mV/g after amplifier) | 2 Hz to 10 kHz ±5 % | -55 to 250 °C | No electronics in the head | 5 m cable | Stainless steel, IP67

The Monitran MTN/1105C is a premium entry-level industrial accelerometer for vibration analysis at elevated temperatures. It requires a charge amplifier: its sensitivity is 50 pC/g, equivalent to 100 mV/g after the amplifier. Constructed entirely of stainless steel for extended analysis in harsh environments, it withstands surface temperatures up to 250 °C because the sensor head contains no electronics.

An in-line charge amplifier, connected with extra-high temperature cable (265 °C), can be located 5 meters from the heat source, where the temperature is 120 °C or less; another 5 meters (or more) of over-twisted cable connects to the junction box or data collector, with an output of 100 mV/g. The datasheet cites paper machinery, turbines, and high-temperature applications as examples. Guemisa is an official distributor of Monitran in Spain.

Key points

  • Temperature range from -55 to 250 °C, with a sensor head without electronics
  • Sensitivity of 50 pC/g (equivalent to 100 mV/g after the load amplifier) and nominal capacitance of 470 pF
  • Frequency response of 2 Hz to 10 kHz ±5% (-3 dB at 0.8 Hz), mounted base resonance of 18 kHz (nominal) and 5 m cable (20 m max. between accelerometer and load amplifier)

Technical Frequently Asked Questions

What load amplifier does the Monitran MTN/1105C need?

According to the datasheet, the MTN/CA003 and MTN/CA096 SMC part numbers are used for the version with a connector; adding "E" to the order code makes the charge amplifier integral. The amplifier delivers 100 mV/g, with input/output via SMC, BNC, or integral cable connectors, ±50 g (±5 V AC), a noise level of 1 mg, and a temperature range of -25 to 125 °C.

At what temperature can the MTN/1105C operate?

The sensor operates from -55 to 250 °C because its head contains no electronics. The in-line charge amplifier connects with extra-high temperature cable (265 °C) and can be located up to 5 meters from the heat source, where the temperature is 120 °C or lower.

What cable length does it support between the accelerometer and the charge amplifier?

The sensor uses 5 m of low-noise over-twisted cable, with a maximum of 20 m between the accelerometer and the charge amplifier. From the amplifier, another 5 meters (or more) of over-twisted cable connects to the junction box or data collector.

Properties

FeatureSpecification
Measure and signal
Measured magnitudeAcceleration (vibration)
Sensor outputCharge: 50 pC/g (equivalent to 100 mV/g after the charge amplifier)
Capacitance470 pF nominal
Measurement ranges±50 g (±5 V AC), with the load amplifier
Frequency response2 Hz to 10 kHz ±5% (-3 dB at 0.8 Hz)
Mounted base resonance18 kHz (nominal)
Cross-sectional sensitivityLess than 5%
Charge amplifier
Amplifier referencesMTN/CA003 and MTN/CA096 SMC for the version with connector; adding E to the order code, integral load amplifier
Polarization voltage12 V DC (nominal)
Noise level1 mg
Amplifier temperature-25 to 125 °C
Entrance/ExitSMC connector, BNC or integral cable
Environment and mechanics
Sensor temperature range-55 to 250 °C
IsolationIsolated base
Wire5 m of low-noise overtwisted cable (20 m max. between accelerometer and load amplifier)
Housing materialStainless steel
SealedIP67
Tightening torque8 Nm
Weight100 g (nominal)
Dimensions (according to plan)37 mm high, Ø22 mm, 25 mm between faces; MTN/CA003 amplifier: 75 mm long, Ø16 mm
ReferenceConfiguration
MTN/1105C MTN1105CMounting: ¼" UNF female Technical data sheet MTN/1105C (PDF)
MTN/1105CQ MTN1105CQMounting: Quick Fit female MTN/1105CQ technical sheet (PDF)
High temperature accelerometer up to 250 °C Monitran MTN/1105C with 5 m cable
Dimensions of the Monitran MTN/1105C accelerometer: 37 mm high, Ø22 mm, 25 mm between faces

Other products

Monitran-Logo
Checks accelerometers and cable assemblies | Low/high polarity, open circuit, and short circuit detection | Tri-color LED | BNC input | 2 x 9V PP3 batteries | 158 x 95 x 33 mm
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Adjustable metal supports | Stroke 50–1000 mm | 5 kΩ (≤600 mm), 10 kΩ (≥750 mm) | Linearity <±0.07 % | Potentiometric output (divider) | Max. supply 60 V | IP50 · shaftless · DIN 43650
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Through shaft Ø6, 8, 10 or 12 mm | Housing Ø40 mm | 10 to 2500 RPM | NPN, push-pull or line driver | Power supply 5 V ±5 %, 12–24 V | IP52 shaft side | Tangential coupling
Official logo of Novotechnik, manufacturer of linear sensors, position transducers, and industrial encoders
Voltage divider | Stroke 10 … 300 mm | Linearity ≤ ±0.05 … ±0.25 % | Repeatability 0.01 mm | 42 V max. | -40 … +100 °C | Mounting by adhesive or clamping
DPF Sensors logo
COMPACT pressure transducer, low pressure.
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Servo mounting Ø58, shaft Ø6 f6 | 360, 4096, 8192 or 65536 steps | Parallel, push-pull 20 mA | 10–30 V | IP64 shaft (IP66 sealed) | Gray or binary | Optional preset (P1)
Official logo of Novotechnik, manufacturer of linear sensors, position transducers, and industrial encoders
Magnetostrictive | CANopen DS-406 | Stroke 50 … 4250 mm | Resolution 1 or 5 µm | 1 or 2 position markers | 13 … 34 VDC | 350 bar · IP67 / IP68
B&C Electronics – Italian manufacturer of industrial water sensors and analyzers
pH probe for immersion in PVC tube. Length 720 mm.
NESA Environmental Meters
Pt100 4-wire | -40 ÷ +60°C | Pt100 1/3DIN | ±0.1°C @ 0°C | WMO · EN 15518-3:2011 | 10÷30Vdc | 700g
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Absolute, wire diameter 0.9 mm | Stroke up to 3 m | Resolution 0.1 or 1 mm | PROFIBUS-DP Class 2 | 10–30 V DC | IP64 (cable gland IP65) | Linearity ±0.05 % fs.
Shopping Basket