Linear Cable Transducer F300P

Budget-friendly price Request a quote
Absolute, wire diameter 0.9 mm | Stroke up to 3 m | Resolution 0.1 or 1 mm | PROFIBUS-DP Class 2 | 10–30 V DC | IP64 (cable gland IP65) | Linearity ±0.05 % fs.

The ELCIS F300P is an absolute wired linear transducer, with 0.9 mm diameter wire and Profibus-DP output, for measuring linear displacements up to 3 meters.

The electronics incorporate ASIC photodiodes with a 100,000-hour LED light source, a line driver (according to RS485), and status indication with two LEDs. It is protected against reverse polarity and overvoltage, with an unbreakable encoder disc and EMC certification according to EN 50081-2 and EN 61000-6-2.

Encoder and mechanics IP64; the output IP rating depends on the connection: cable gland (3PG, 3PG-VA, 2M20) IP65. Humidity 98% % (no liquid present). Operating temperature -20 to +70 °C and storage temperature -40 to +85 °C. Weight 1.2 kg depending on the stroke.

  • Max. standard stroke 3 meters (3000+50 mm according to the plan) and resolution of 0.1 mm either 1 mm.
  • Interface Profibus-DP Class 2 with programmable parameters (rotation direction, resolution per revolution, total resolution, preset value, output speed and Software Limit Switches).
  • Thread of stainless steel Ø 0.9 mm and half-life of >10⁶ cycles at 2 m/s.
  • Maximum linearity error of ±0.05 % fs., max. read speed of 4 m/s and max. acceleration of 2.5 G.
  • Encoder IP64; cable glands IP65.

Technical Frequently Asked Questions

What communication interface does the F300P transducer have?

(DP) Profibus-DP Class 2. The output electronics is a line driver (according to RS485).

What career paths and resolutions does it offer?

Max. standard stroke of 3 meters (3000+50 mm according to the plan), with resolutions of 0.1 mm (code 100) and 1 mm (code 1000) and binary output code.

What level of protection and connections does it have?

Encoder and mechanics IP64; cable glands 3PG, 3PG-VA and 2M20 are IP65. The IP rating of the outlet depends on the connection.

Properties

FeatureSpecification
Mechanics
Max standard stroke.3 m
Weight1,2 kg depending on the career
Electric
Resolution / Exit Code0,1 mm, 1 mm · Binary code
Maximum linearity error.±0.05 % fs.
Feeding and max. consumption.10÷30 Vcc · 2.5 W
Output interface(DP) Profibus-DP Class 2
Protection and environment
Max reading speed / acceleration.4 m/s / 2.5 G
Average life expectancy>10⁶ cycles at 2 m/s
Impact resistance30 G (11 ms)
Vibration resistance10 G (10 ÷ 1000 Hz)
Degree of protectionEncoder and mechanics: IP64 · Cable gland: IP65 · Output: according to connection
Operating/storage temperature-20 ÷ +70 °C / -40 ÷ +85 °C
Humidity98 % (without liquid present)
Other features
Traction threadØ 0.9 mm stainless steel
Forces on the cableExtraction 20 N · 10 N retraction
ReferenceConfiguration
F300P-B-1000-1030-3PGF300PB100010303PGBinary output code · 1 mm resolution · 10–30 V DC · 3 cable glands · IP65
F300P-B-100-1030-3PGF300PB10010303PGBinary output code · 0.1 mm resolution · 10–30 V DC · 3 cable glands · IP65
Other combinations of resolution, power supply, electronics and connection are available upon request: please contact us and we will confirm the exact reference.
ELCIS F300P Linear Wire Transducer
Dimensional drawing of the ELCIS F300P linear cable transducer

Related documentation, cases, and guides

Other products

Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Square flange □63.5, shaft Ø9.52 h7 | Up to 1024 steps (10 bits) | Parallel, SSI or analog (mA or V) | 5, 15, 8–24, 18–28 or 10–30 V | IP54 shaft (IP65 sealed) | Gray or Excess
DPF Sensors logo
Load cell for 3-axis stress measurement, design-based measurement range, output signal 2 mV/vx axis
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Shaft Ø6 h7, housing Ø44 mm | Centering Ø20 h7 | 1 to 2500 imp/rev | Push-pull or line driver | Power supply 5–24 V (driver: 5 V) | IP54 shaft side | 100 kHz (160 kHz optional)
DPF Sensors logo
Flush diaphragm pressure transducer (supply)
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Housing Ø65, shaft Ø10 h7 | Up to 8192 steps (13 bits) | Parallel, SSI or analog (mA or V) | 5, 15, 8–24, 18–28 or 10–30 V | IP65 shaft (IP66 sealed) | Gray, Binary, Excess or BCD
ATESTEO LOGO, manufacturer of torque sensors
Rotary Telemetry | 1,000 Nm | 20,000 RPM | PCD Flange 101.5 mm | Inertia 0.0033 kg·m²
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Absolute, thread Ø 0.51 mm | Stroke up to 6 m | Resolution 0.1 or 1 mm | DeviceNet | 10–30 V DC | IP64 (IP65 connections) | Linearity ±0.05 % fs.
NESA Environmental Meters
4÷20mA / ModBus RS485 | NO2 | 0÷20 / 0÷200 ppm | -30 ÷ 50°C | 11…30 Vdc | IP54 | 230g
Keller logo
Compact high-precision digital pressure gauge up to 700 bar
THERMOHYGROMETER H. Rel., Dew point, Temp., Wet bulb
Shopping Basket