Single-turn Absolute Encoder A/390A

Properties

FeatureSpecification
Main ApplicationLaminators and Adverse Environments
Vcc Power Supply18–28 V, 5 V ±5%, 15 V ±5%, 8–24 V, 10–30 V
AxisØ 10 mm / 12.7 / 14 mm Stainless Steel
Weight800 g
Max. Radial/Axial Load15 Kg
Maximum RPM6.000 / 3.000
Bearing Life1.5× 10⁹ rev.
Impact Resistance40 G x 11 ms
Operating Temperature0 – +70 °C
Resolution (positions)Up to 16384 (14 bits)
Maximum Frequency25 kHz
Electronic OutputNPN, 70mA, Analog
Starting Torque90 / 150 gcm
Vibration Resistance12 G (10 – 2000 Hz)
Single-turn Absolute Encoder A/390A
Dimension drawing of the A/390A single-turn absolute encoder

Other products

B&C ELECTRONICS Logo 2026 WATER QUALITY
ISO 7027 online turbidity sensor for continuous measurement in drinking water and industrial processes with 4…20 mA, RS485 and Modbus RTU output.
Indoor CO2 sensor, range up to 4000 ppm, analog output and relay alarm
LOGO TORQUE CERTIFICATION
Steady Reaction Transducer | 30,000 – 50,000 N·m | 0 RPM | PCD Flange 290.0 mm | Base Inertia 0.5695 kg·m²
Housing Ø115 mm | Shaft Ø 8 mm / 9.52 / 12 / 12.7 mm Stainless Steel | Operating Temp. 0 – +70 °C | Resolution 2 to 13 bits (4 to 8192 positions) | Max. Load 18 Kg | Max. Frequency 50 kHz | Weight 850 g | Vibration 12 G (10 – 2000 Hz) | Impacts 50 G x 11 ms | Protection IP65 | Max. RPM 6,000 / 3,000 | Power Supply 5V to 30V | Bearing Life 1.5×10^9 revolutions
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Power supply 5-30V | 10mm Stainless Steel Shaft | Max. Load 10kg | IP65/IP66 | Weight 1.3kg | Bearing Life 10^9 Revs | Impact Resistance 50G | Temperature -30-85°C | ATEX T5/T6 | Push-Pull/Driver Output
B&C ELECTRONICS Logo 2026 WATER QUALITY
pH sensor for range 0 to 13pH with S7 connector Compatible with all controllers on the market
Wire displacement sensor, ranges from 11000 ….. 35000 mm, with output signal in 5 Kohm resistance, 0-5 / 10 Vdc, 4-20 mA, RS485 or pulses
Schreiber Messtechnik logo
LVDT Sensor | Ranges 30°, 60°, 90°, 120° | Accuracy up to 0.25% | External (SM60) or Integrated (SM61) Electronics | Housing Ø 36.5 mm
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
I/44S – Compact Incremental Encoder, Shaft Ø 6×10 mm, Body: Ø 44×56 mm, Pulse range: 1 to 2,540
Keller logo
LEVEL RECORDER
Shopping Basket