Soil moisture sensor SUT

Budget-friendly price Request a quote
Soil moisture in VWC | 0–100% VWC | High frequency, non-resistive | 4–20 mA · 0–2 Vdc · RS485/Modbus | -40–85°C | 10–20 Vdc | Ø = 7 mm, L = 150 mm

The NESA SUT is a soil moisture sensor that detects the soil's dielectric constant using high-frequency measurements. The value responds to changes in soil moisture and is independent of salinity. It is temperature compensated and interconnectable with MCS modules.

Measurement range 0–100% VWC (ground water volume), time constant <1 s, and operating temperature -40–85°C. Standard output signal 4–20 mA (0–2 Vdc or RS485/Modbus); power supply 10–20 Vdc, 5 mA @ 12 Vdc (typical). Aluminum body, copper electrodes, 110 g.

Key points

  • Measurement range 0÷100% VWC (volume of water in the ground); time constant <1 s (average time)
  • High-frequency measurement of the soil's dielectric constant; non-resistive; insensitive to salinity; does not corrode over time
  • Temperature compensated sensor; -40 ÷ 85°C
  • Standard output signal 4÷20mA, (0÷2Vdc or RS485/Modbus); with MCS module (optional): 4÷20mA (B) or RS485 / Modbus (C)
  • Power supply 10÷20 Vdc; 5mA@12Vdc (typical); protections against reverse polarity and transients
  • Aluminum body, copper electrodes; 110g; Ø = 7 mm, L = 150 mm; WMO; CE; supplied with calibration report

Technical Frequently Asked Questions

What is its measurement range and time constant?

Measurement range 0÷100% VWC and time constant <1 s (average time).

What exit signals does it have?

Standard output signal 4÷20mA, (0÷2Vdc or RS485/Modbus). In the order code, A is 0÷2Vdc; B (4÷20mA) and C (RS485 Modbus) have MCS option.

What kind of diet does it need?

10÷20 Vdc, with a consumption of 5mA@12Vdc (typical), and protections against reverse polarity and transients.

Properties

FeatureSpecification
Measurement and operating principle
Measured magnitudeSoil moisture in VWC (volume of water in the soil)
Measurement principleDielectric constant of the soil, measured at high frequency
Sensitive elementElectrodes sensitive to variations in the dielectric constant of the ground
Sensor typeNon-resistive
Measurement range0÷100% VWC (volume of water in the ground)
Time constant<1 s (average time)
SalinityInsensitive to salinity
CorrosionIt does not corrode over time
Temperature compensationTemperature compensated sensor
Voltage-VWC correlationApproximated with 4 line segments, VWC = α*V-β (see graph)
CalibrationIt comes with a calibration report
Regulatory complianceWMO; CE
Exit signals
Standard exit sign4÷20mA, (0÷2Vdc or RS485/Modbus)
Output signal (A)0÷2Vdc
With MCS module (optional)4÷20mA (B) or RS485 / Modbus (C)
MCS ModulesInterconnectable with MCS modules
Power supply, environment, and mechanical data
Feeding10÷20 Vdc
Consumption5mA@12Vdc (typical)
Operating temperature-40 ÷ 85°C
ProtectionsAgainst polarity reversal and transients
Done in (body)Aluminum
Performed on (electrodes)Copper
Weight110g
DimensionsØ = 7 mm, L = 150 mm
NESA SUT Soil Moisture Sensor
Dimensions of the NESA SUT soil moisture sensor

Other products

NESA Environmental Meters
PM2.5 · PM10 | 0÷1000 µg/m³ | Laser scattering | 2 x 4-20mA or ModBus RTU485 | 10 ÷ 28Vdc | IP53 | 120 × 95 × 70 mm
Monitran-Logo
Dual output: 4-20 mA proportional to acceleration rms + AC proportional to acceleration | AC 100 mV/g 50 mV/g | 2 Hz to 1 kHz ±10% | 12-32 V DC | -25 to 90 °C | Stainless steel, IP67
DPF Sensors logo
Analog CO2 sensor with configurable scaling function
DPF Sensors logo
SENSORS FOR MEASURING DISPLACEMENT BY EDDY CURRENT, RANGES 1-2-4-5 mm, output signal 4-20 mA – 0-10 Vdc, RS485
NESA Environmental Meters
Soil moisture in VWC | 0–100% VWC | High frequency, non-resistive | 4–20 mA · 0–2 Vdc · RS485/Modbus | -40–85°C | 10–20 Vdc | Ø = 7 mm, L = 150 mm
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Housing Ø102, spindle Ø12 h7 | Up to 8192 steps (13 bits) | Parallel, SSI or analog (mA or V) | 5, 15, 8–24, 18–28 or 10–30 V | IP65 spindle (IP66 sealed) | Gray, Binary, Excess or BCD | Front or side mounting
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Servo mounting Ø58, shaft Ø10 h8 | Up to 16 bits per revolution | SSI or SSI + preset, RS422/RS485 | 10–30 V | IP64 shaft (IP66 sealed) | Gray or binary | LSB step 800 kHz
Transit time ultrasonic flow meter
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Ø58 mm, servo flange | Ø6 h7 stainless steel shaft | 1 to 25000 pulses/revolution | NPN, PNP, push-pull, driver, TTL | 5–30 V power supply | IP64 shaft, IP66 sealed | 100 kHz (300 kHz optional)
Shopping Basket