Single-turn Absolute Encoder A/345

Square □45, Ø4 h7 shaft | Up to 256 steps (8 bits) | Parallel NPN open collector | 5 V ±5 % | IP64 shaft (IP65 sealed) | Gray, Excess or custom

El ELCIS 345 (A/345) es un encoder absoluto monovuelta óptico de 2 a 8 bits, con electrónica incorporada, apto para aplicaciones robóticas.

As an optical single-turn absolute encoder with LED source and phototransistors, the A/345 offers up to 256 steps per revolution (8 bits) in Gray, Excess, or custom code. The output is parallel, via a 1 m cable with radial or axial output, and the direction of rotation (CW or CCW) is selected at the time of ordering.

Tiene formato cuadrado de 45 mm y eje de acero inoxidable Ø4 h7 para 0,5 kg de carga radial/axial, resiste impactos de 50 G y vibraciones de 12 G, y trabaja entre 0 y +70 °C con protección IP64 en el lado del eje (IP65 en versión sellada).

  • Resolution of 2 to 8 bits: until 256 steps per lap.
  • Code Gray, Excess either personalized (bajo pedido).
  • Direction of rotation CW either CCW to choose in the order.
  • Impact resistance of 50 G (11 ms) already vibrations of 12 G (10–2000 Hz).

Technical Frequently Asked Questions

What resolutions does the A/345 offer?

In Gray code, 8, 16, 32, 64, 128 or 256 steps per revolution; in Excess, 180. Other resolutions available upon request.

How do you choose the direction of rotation of the A/345?

In the order code: leave the box empty for clockwise (CW) rotation or AR for counterclockwise (CCW). The direction of rotation is not switchable (up/down).

What connection and output stages does the A/345 support?

1 m cable (CV, IP65) with radial (R) or axial (–) output, and 10 mA open collector NPN stage, with parallel interface.

Properties

FeatureSpecification
Mechanics
Exit stageNPN open collector 10 mA (standard)
AxisØ4 h7 acero inoxidable (opc. Ø5, Ø6, Ø8 o bajo pedido) (personalizable bajo pedido)
max radial/axial load.0,5 kg
Electric
InterfaceParallel (standard)
Exit-side protectionIP65 (CV cable)
Feeding5 V ±5 %
Max. consumption.200–400 mA according to number of bits (customizable upon request)
Max frequency.50 kHz (customizable upon request)
Exit codesGray, Excess, customized
Max resolution.256 steps/turn (8 bit)
Protection and environment
axle-side protectionIP64 standard • IP65 sealed • IP53 low torque
max. continuous RPM6000 standard · 3000 sealed · 8000 low torque (intermittent: +30 %)
Impact/vibration resistance50 G (11 ms) 12 G (10–2000 Hz)
Operating/storage temperature0 … +70 °C / -30 … +85 °C (customizable upon request)
Other features
FormatCuadrado □45 mm
ReferenceConfiguration
345-G-16-5-CV345G165CVGray · 16 pasos/vuelta · 5 V ±5 % · NPN colector abierto 10 mA · Paralelo · Cable 1 m · IP65 · salida axial · Horario (CW)
A/345-G-256-5-CV-R-01A345G2565CVR01Gray · 256 pasos/vuelta · 5 V ±5 % · NPN colector abierto 10 mA · Paralelo · Cable 1 m · IP65 · salida radial · Horario (CW)
ELCIS A/345 single-turn absolute encoder
Dimensional drawing of the ELCIS A/345 single-turn absolute encoder

Other products

B&C Electronics – Italian manufacturer of industrial water sensors and analyzers
Range 2mS to 20S, For use in line with DIN11851 connector and C565.2 or C7685 controller.
Dimetix_AG-1
Up to ~100 m over natural surfaces, 500 m with reflector, ±3 mm @2σ, 100 Hz and operating from -10 to +60 °C.
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Servo flange Ø44 mm, shaft Ø6 h7 | 8 to 2048 bpm/rotation | Line driver 26LS31/ET7272, NPN | Power supply 5, 8–24, 18–28, 10–30, 5–30 V | IP66 shaft (IP53 with low torque) | 12000 rpm with low torque (option B) | Impacts 100 G (6 ms)
SIL Pressure. Liquids.
ATESTEO LOGO, manufacturer of torque sensors
Dual Inductive Metrology | Limit 500 N·m | 21,000 RPM | PCD Flange 84.0 mm | Accuracy 0.04% | Inertia 0.0017 kg·m²
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Through shaft Ø30, 35, 40 or 42 mm | 1 to 5000 impedances/revolution | NPN, PNP, push-pull, line driver | Power supply 5–30 V | IP65 shaft side | 100 kHz | Internal tangential coupling
Differential pressure transducer for air
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Servo-type clamping Ø90 | Centering Ø80 h7 and Ø40 h7 | Ø12 h7 stainless steel shaft | 1 to 3600 impedances/revolution | NPN, push-pull, line driver, TTL | 5–30 V power supply | IP65 shaft (IP66 with Z-seal)
B&C Electronics – Italian manufacturer of industrial water sensors and analyzers
Conductivity sensor range -5 to 85ºC, K=1

Request a quote or technical information

Please tell us the quantity you need to measure, the range, the accuracy, the output signal, or any other requirements of your application.

We will help you select the right equipment and send you a quote or technical documentation.

You can also contact us by phone:

91 764 21 00

Shopping Basket