LUX illuminance sensor

Budget-friendly price Request a quote
0÷10Vdc or 4÷20mA | 0.02 ÷ 200 klux (3 ranges) | Silicon photodiode, V(λ) curve | 65x58x52mm | 16 ÷ 30Vdc (0÷10Vdc) · 10.8 ÷ 30Vdc (4÷20mA) | IP67

The NESA LUX is an indoor/outdoor (IP67) illuminance (lux) sensor with a silicon photodiode whose spectral response matches that of the human eye (standard photopic curve V(λ)). Three selectable ranges: 0.02 ÷ 2 klux, 0.2 ÷ 20 klux, and 2 ÷ 200 klux.

Output 0-10Vdc or 4-20mA. Supplied with a 5m cable and calibration report. For offices and laboratories, industrial buildings, shopping centers, theaters, museums, sports facilities, roads, tunnels, and nurseries.

Key points

  • Ranges 0.02 ÷ 2, 0.2 ÷ 20 or 2 ÷ 200 klux
  • Sensitivity 5-500 mV/lux, accuracy < 8% with respect to V(λ)
  • Silicon photodiode, photopic curve V(λ)
  • Output 0÷10Vdc or 4÷20mA
  • IP67, -20 ÷ +60 °C, < 200 g

Technical Frequently Asked Questions

What are the measurement ranges of LUX?

Three, to be indicated in the order: a) 0.02 ÷ 2 klux, b) 0.2 ÷ 20 klux and c) 2 ÷ 200 klux.

What exits does it have?

LUX-A: 0÷10Vdc, with a 16 ÷ 30Vdc power supply. LUX-B: 4÷20mA, with a 10.8 ÷ 30Vdc power supply.

How do I order it?

Sensor (LUX), range (a, boc), output (A or B), sensor-datalogger cable (05, 10 or xx, length in meters to be specified) and SSU support of L = 700-750 mm. Manufacturer example: LUX b B 10 SSU.

Properties

FeatureSpecification
Measurement and operating principle
Measured magnitudeIlluminance (lux)
Measuring rangea: 0.02 ÷ 2 klux · b: 0.2 ÷ 20 klux · c: 2 ÷ 200 klux (to be specified when ordering)
Spectral rangeV(λ) curve
Typical sensitivity5-500 mV/lux
Precision< 8% compared to the standard photopic curve V(λ)
Transducer typeSilicon photodiode
Regulatory complianceEC
Output signals and interface
Output (version A)0-10Vdc
Output (version B)4÷20mA
CalibrationBy comparison with a primary standard instrument of known constant; delivered with calibration report
Power supply, environment, and mechanical data
Power supply and consumption (output 0÷10Vdc)16 ÷ 30Vdc, ~ 10 mA @ 12Vdc
Power supply and consumption (4÷20mA output)10.8 ÷ 30Vdc, ~ 10 mA @ 12Vdc
ProtectionsAgainst polarity reversal and transients
Operating conditions-20 to +60 °C
Degree of protectionIP67
Dimensions65 x 58 x 52 mm (see drawing)
Weight< 200 g
SupplyUsing a 5mm cable, I got calibration information.
ReferenceConfiguration
LUX-ALUXAModel: LUX · Output signal: 0÷10Vdc · Supply: Range a, mouth indicate; with 5m cable calibration report
LUX-BLUXBModel: LUX · Output signal: 4÷20mA · Supply: Range a, mouth indicate; with 5m cable calibration report
NESA LUX Photopic Illuminance Sensor
Dimensions and connections of the NESA LUX illuminance sensor

Other products

Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Shaft Ø14 h6, housing Ø170 mm | Centering Ø140 h6 | 18000–90000 imp/rev | NPN, PNP, push-pull, driver, TTL | 5–30 V | IP65 shaft (IP53 under torque) | 100 kHz (1000 kHz optional)
Dimetix_AG-1
Advanced High-Speed, High-Performance Industrial Communication Solution Range: Native IP65 integration with 10/100 Mbit/s transfer
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Servo flange Ø41.5 mm, shaft Ø6.35 h7 | 8192 steps/revolution (13 bits) | SSI (RS422), natural binary | Power supply 5 V, 5–30 or 10–30 V | IP64 shaft (IP66 sealed) | 12000 rpm with low torque (option B) | Impacts 100 G (6 ms)
DPF Sensors logo
Industrial pressure transducer
NESA Environmental Meters
8-32 differential inputs @24bit | 5 digital inputs | Linux with Apache web server | USB, RS232, RS485, Ethernet | -40 to +70°C | IP20 | 200 x 110 x 74.5 mm
Official logo of Novotechnik, manufacturer of linear sensors, position transducers, and industrial encoders
CANopen | Ø 79 mm | Resolution 14 bits | Shaft Ø 13 mm or Ø 10 mm | 12/24 VDC (8 … 34 VDC) | IP67/IP69K | 360°, 1 or 2 channels
DPF Sensors logo
Pressure switch
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Housing Ø90 mm, double O-ring | Shaft Ø12 h7 stainless steel | 1 to 25000 imp/rev | NPN, PNP, push-pull, driver, 1 Vpp | Power supply 5–30 V | IP66 shaft (IP67 sealed) | 100 kHz (300 kHz optional)
ATESTEO LOGO, manufacturer of torque sensors
Inductive Transducer | Limit 5,000 N·m | 15,000 RPM | PCD Flange 155.5 mm | Accuracy 0.02% | Inertia 0.0167 kg·m²
Official logo of Novotechnik, manufacturer of linear sensors, position transducers, and industrial encoders
Ratiometric output 0.25…4.75 V | Length 40mm, 7mm high | Resolution 12 bits | Without shaft: magnetic position marker | 5 VDC (4.5 … 5.5 VDC) | IP67 / IP68 / IP69 | 1 or 2 channels
Shopping Basket