SP-2500 Conductive Plastic Rotary Potentiometer

Budget-friendly price Request a quote
Voltage divider | Ø 27mm | Shaft Ø 3 mm | Ub max. 42V | IP40 | 335° ±2, linearity ±0.3 %

Novotechnik SP-2500 rotary potentiometer. Plastic housing, Ø 27 mm, weight 15 g.

Rotary potentiometer with plastic housing, conductive resistive element, and voltage divider output. Ø 27 mm, shaft Ø 3 mm. Actual electrical travel 335° ±2 (A5033), continuous rotation. Independent linearity ±0.3%, resolution better than 0.01°. Life of 50 × 10⁶ movements.

Key points

  • Life: 50 × 10⁶ moves
  • Standard linearity ±0.3%
  • Resolution better than 0.01°
  • Continuous mechanical travel
  • Synchro flange with 3 mounting plates
  • Connection via integrated pressure connector

Technical Frequently Asked Questions

What can be connected to the SP-2500 rotary potentiometer?

It can be connected to a ZK1-500 cable set, Z103 G3 fork coupling, process indicators with MAP display and signal conditioners for standardized MUP and MUK output signals.

How do I order the SP-2500 rotary potentiometer?

For example, SPK2501 A5033 (Art. 400038001) is the version with 5 kΩ, 335° ±2. SPK2501 A1812 (Art. 400038002) = 1.8 kΩ and 120° ±2.

Under what conditions does the SP-2500 rotary potentiometer operate?

Operating temperature: -40 … +85 °C. Protection: IP 40 (DIN 400 50 / IEC 529).

Properties

FeatureSpecification
Measurement data
Mechanical tour360°, continuous
Resistance tolerance-0 … +40%
Repeatability0,003 % (0,01°)
Effective temperature coefficient of the output/applied voltage ratiotyp. 5 ppm/K
Electrical data
Maximum permissible applied voltage42 V
Recommended cursor current≤ 1 µA
Maximum cursor current in case of failure10 mA
Insulation resistance (500 VDC, 1 bar, 2 s)≥ 10 MΩ
Dielectric strength (50 Hz, 2 s, 1 bar, 500 VAC)≤ 100 µA
Environmental conditions
Working temperature-40 … +85 °C
Vibration5 … 2000 Hz, Amax = 0.75 mm, amax = 20 g
Shock50 g, 11 ms
Life50 × 10⁶ movements (limitation of movements over the dead zone)
ProtectionIP 40 (DIN 400 50 / IEC 529)
Mechanical data
Housing diameterØ 27 mm
HousingIn two pieces: casing and temperature-resistant plastic lid
AxisStainless steel
BearingsStainless steel
Resistive elementConductive plastic
Cursorprecious metal multi-finger
Electrical connection3-pole pressure connector
Fixation3 M2.5 cylindrical screws with washers
Allowable load on the shaft (axial and radial), static or dynamic15 N
Starting torque≤ 0.1 Ncm
Maximum permissible angular velocity10⁴ rad/s²
Weight15 g
Connection
Terminal 1Orange
Terminal 2Red
Terminal 3Brown
ZK1-500 cable set
Length500 ±5 mm
Separate insulation for each wire5 ±1 mm
ThreadsTinned copper
Wire insulationETFE
Outer diameter of the thread1.1 mm
ZK1-500 cable set
Thread section0.22 mm²
AWG24
Colors1 orange, 2 red, 3 brown
Connector housing3-pole, crimp type, JST XHP-3
Terminals3 pcs, with crimp connection, JST SXH-001T-P0.6
Novotechnik SP-2500 Conductive Plastic Rotary Potentiometer
Dimensional drawing of the Novotechnik SP-2500 conductive plastic rotary potentiometer

Other products

DPF Sensors logo
ATEX pressure transducer
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Servo mounting Ø58, shaft Ø6 h7 | Up to 8192 steps (13 bits) | Parallel, SSI or analog (mA or V) | 5, 15, 8–24, 18–28 or 10–30 V | IP64 shaft (IP66 sealed) | Gray, Binary, Excess or BCD
B&C Electronics – Italian manufacturer of industrial water sensors and analyzers
ST315, Measuring range 0 to 2,000 mS, extendable and submersible. Working range 0 to 40°C
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Hollow shaft Ø4–8 mm | Housing Ø38 mm | 1 to 2500 impedances/revolution | Push-pull; line driver (5 V only) | Power supply 5 V ±5 %, 5–12 V, 12–24 V | IP54 shaft side | Elastic coupling
LVDT Manufacturer Logo Schreiber Messtechnik
LVDT inductive sensor | Strokes 5–20 mm depending on version | M12×1 threaded housing | Linearity 0.25 % / 0.5 % | IP66/IP67 | Moving core or spring-loaded probe | External electronics
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Through-shaft Ø15–30 H7 | Ø90 mm, tangential coupling | 1–36000 imp/rev | NPN, PNP, push-pull, driver, TTL | 5–30 V | IP65 shaft | 100 kHz (300 kHz optional)
ATESTEO LOGO, manufacturer of torque sensors
Reference Torque Gauge | 20,000 – 30,000 N·m | 0 RPM | PCD Flange 218.0 mm | Inertia 0.1558 kg·m²
Dimetix_AG-1
It measures up to ~100 m over natural surfaces and up to 150 m with a reflector, with a typical accuracy of ±3 mm @2σ and a frequency of up to 100 Hz. It is geared towards position and level applications where ±1 mm accuracy is not required.
Shopping Basket