SIL
Industrial LOW pressure transducer
- Manufacturer: DPF Sensors
- Category: Pressure, SENSORS
Low pressure sensor for gases and liquids.
Properties
 | 0…10 mbar to 0…40 bar |
|---|---|
| -40…85°C medium temperature |
| 1 % precision |
| Output signal 4…20 mA, 0…10 Vdc, 1…5 Vdc |
| 1/4″ – 1/2″ thread and special ones. |
| Absolute or relative pressure. |
| LEVEL MEASUREMENT |
Other products
PID controller (heat-cold), temperature probe reading, regulation output control, integrated in power SSR module
Power supply 5V | Shaft Ø14mm | Weight 3.5kg | Stainless steel base | Sinusoidal output | IP65 protection | Bearing life 10^9 revolutions | Starting torque 5000 gcm | Max frequency 2.2MHz | Temperature -30 to 85°C
Dual Output | 4-20mA Acceleration + AC Output | Configurable Acceleration Range | 2Hz-1kHz Frequency | 12-32V DC Power Supply | -25 to 90°C Temperature | IP67 Protection | Stainless Steel | Insulated Base | 3-pin Connector | 62GB
Change Analysis | ±200 N (Optional 500 N) | ±125 mm (Optional 150 mm) | 400 kHz Sampling | 8 Channels
High Capacity Inductive Torque Transducer (20,000 … 30,000 Nm)
Cell content K=1cm-1 (2 to 2,000µS) Thread 1″ BSP, body material polypropylene
Top Outlet, Intrinsically Safe ATEX/IECEx | 4-20mA DC Output | RMS Acceleration Measurement | Configurable Range | Frequency 2Hz-1kHz | Power Supply 12-32V DC | Temperature -55 to 90°C | IP67 Protection | Stainless Steel | Mil-C-5015 Connector
Novotechnik TR-0025 Industrial Potentiometric Linear Sensor · Reference 400023261 · Electrical travel 25 mm · Shielded cable output
6 potentiometer SETPOINTS (precision adjustable), externally selectable via contact. (e.g. 6 preset speeds for variable speed drives) 6 contacts (potential-free) without power supply
I/45 – Standard Incremental Encoder, Shaft Ø 6×10 mm, Body: Ø 45×56 mm, Pulse range: 1 to 2,540