DS1 / DS2

Differential pressure switch for air

Category: Pressure, SENSORS

Dirt in filters or fans, pressurized rooms, flow.

Properties

	±20 to 300 pa /±1 Kpa to 5 Kpa
	-30…85°C medium temperature
	5.00 % precision
	Switched contact
	Differential pressure.
	Pipe 3.5mm

Other products

SMX-2

ATEX pressure transducer

Pressure, SENSORS

Linear LVDT Schreiber Series SM26 and SM28

Inductive Differential | Ranges 24 mm to 360 mm | Frequency 10 kHz | 30.0 mm PCD Flange (Support) | Housing Ø 10/12 mm | IP68 / M12 Optional

Displacement, LVDT Unamplified, SENSORS, LVDT Sensors

DPF-MIC02

NDIR CO2 controller sensor (4000 ppm) RS485 output with LED signaling

SENSORS, Gas Sensors

I/45 Standard Incremental Encoder

I/45 – Standard Incremental Encoder, Shaft Ø 6×10 mm, Body: Ø 45×56 mm, Pulse range: 1 to 2,540

Encoder, Incremental Encoder, Miniature Incremental Encoder, SENSORS

Incremental Encoder for Motors I/149C

Shaft Diameter 30-50mm | Max. Load 15kg | Weight 950g | Bearing Life 1.5×10^9 revs | Impact Resistance 50G | Temperature 0-70°C | Pulses/Rev 1-3600 | Max. Frequency 100kHz | Power Supply 5-30V | IP65 Protection

Encoder, Incremental Encoder, Incremental Encoder for Motors, SENSORS

BPSE

The BPSE load cell, used to measure compressive forces in industrial applications, especially test benches. Measuring ranges from 500 kg to 350 tons.

SENSORS

I/90A Robust Incremental Encoder

I/90A – Incremental Encoder Ø 90 mm, solid shaft Ø 12 mm, robust metal body, resolution up to 25,000 dpi

Encoder, Incremental Encoder, Robust Incremental Encoder, SENSORS

SMF

Flush diaphragm pressure transducer (supply)

Pressure, SENSORS

DMF FLOW METERS

FUEL FLOW METERS

Caudal, SENSORS

Incremental Encoder for I/90CBB Motors

5V Power Supply | Hollow Shaft Ø12-25mm | Push-Pull Output | IP65 Protection | Weight 700g | Anodized Aluminum Base | Bearing Life 1.5×10^9 Rev | Impact Resistance 50G | Operating Temperature 0-70°C | Maximum Frequency 100kHz

Encoder, Incremental Encoder, Incremental Encoder for Motors, SENSORS