Monitran MTN/1310 Triaxial Load Accelerometer

Budget-friendly price Request a quote
Triaxial (three axes) | Load sensitivity 5 pC/g ±10% | Three in-line load amplifiers: 10, 100 or 500 mV/g | 1 Hz to 30 kHz | ±2000 g | -55 to 140 °C | IP64

The Monitran MTN/1310 is a triaxial accelerometer ideal for any application requiring vibration measurement along the three spatial axes: aerospace, automotive, and research and development. It features a load sensitivity of 5 pC/g ±10%, a frequency response of 1 Hz to 30 kHz, and an acceleration range of ±2000 g.

It is supplied with an integral 4-conductor cable with stainless steel over-braiding and three charge amplifiers encapsulated in a single die-cast housing, in-line with the sensor, with outputs of 10 mV/g, 100 mV/g, and 500 mV/g. The 35 g stainless steel housing features 4-point mounting with supplied M3x16 screws and IP64 sealing. Guemisa is an official distributor of Monitran in Spain.

Key points

  • Triaxial charge sensor: 5 pC/g ±10%, 1 Hz to 30 kHz, ±2000 g and capacitance of 300 pF (nominal)
  • Three in-line load amplifiers in a single die-cast enclosure, with outputs of 10 mV/g, 100 mV/g, and 500 mV/g.
  • Operating temperature from -55 to 140 °C, 35g stainless steel housing, IP64 sealed

Technical Frequently Asked Questions

What type of signal does the Monitran MTN/1310 deliver?

The triaxial sensor is a charge sensor (5 pC/g ±10%) and is supplied with three in-line charge amplifiers, encapsulated in a single die-cast case, with outputs of 10 mV/g, 100 mV/g and 500 mV/g.

What are its measurement ranges, frequency, and temperature capabilities?

Acceleration range of ±2000 g, frequency response of 1 Hz to 30 kHz and operating temperature of -55 to 140 °C, with capacitance of 300 pF (nominal).

How is the load amplifier circuit powered?

The system drawing on the sheet shows a constant current source with a +18 to +30 V input and a constant current diode of 0.5 to 8.0 mA; the AC output is taken through a 1 µF capacitor.

Properties

FeatureSpecification
Measure and signal
Load sensitivity5 pC/g ±10%
Load amplifier output10 mV/g; 100 mV/g; 500 mV/g
Acceleration range±2000 g
Frequency response1 Hz to 30 kHz
Capacitance300 pF (nominal)
Output circuit
Constant current source+18 to +30 V; constant current diode from 0.5 to 8.0 mA (according to the system diagram)
AC OutputOutput of the charge-coupled amplifier with 1 µF and 200 k
Environment and mechanics
Operating temperature-55 to 140 °C
SealedIP64
Housing materialStainless steel
Mounting4 points, M3x16 Allen screws (supplied)
WireIntegral ETFE with stainless steel overbraid
Standard cable length5 m to the in-line amplifier; then, 1 m of 4-conductor shielded cable with overtwisting
Dimensions (according to plan)Base 25.4 x 25.4mm; height 26.0 mm
Weight35 g (nominal)
ReferenceConfiguration
MTN/1310 MTN1310Triaxial accelerometer with 5 pC/g charge sensor and three in-line charge amplifiers (10 mV/g, 100 mV/g, and 500 mV/g output) Technical data sheet MTN/1310 (PDF)
Triaxial accelerometer in load mode Monitran MTN/1310
Dimensional drawing of the Monitran MTN/1310 triaxial accelerometer

Other products

Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Servo-type clamping Ø90 | Centering Ø80 h7 and Ø40 h7 | Ø12 h7 stainless steel shaft | 1 to 3600 impedances/revolution | NPN, push-pull, line driver, TTL | 5–30 V power supply | IP65 shaft (IP66 with Z-seal)
DPF Sensors logo
LVDT displacement sensor, pencil type, diameter 8 mm, repeatability better than 1 micron, ranges 2.5, 5 and 10 mm.
LVDT Manufacturer Logo Schreiber Messtechnik
Half-bridge inductive transducer | Strokes from 12 to 360 mm depending on series | Housing Ø12 mm | Linearity 0.25 % / 0.5 % | Up to IP68 | External electronics 10 kHz
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Servo mounting Ø58, shaft Ø10 h8 | Up to 16 bits per revolution | SSI or SSI + preset, RS422/RS485 | 10–30 V | IP64 shaft (IP66 sealed) | Gray or binary | LSB step 800 kHz
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Servo flange Ø44 mm, shaft Ø6 h7 | 8192 steps/revolution (13 bits) | SSI (RS422), natural binary | Power supply 5 V, 5–30 or 10–30 V | Max. frequency 500 kHz | Impacts 100 G (6 ms)
Official logo of Novotechnik, manufacturer of linear sensors, position transducers, and industrial encoders
Voltage divider | Stroke 10 … 200 mm | Linearity ±0.05 … ±0.25 % | Repeatability 0.01 mm | 42 V max. | IP54 | Cable or M8 connector
NESA Environmental Meters
0÷10Vdc or 4÷20mA | 0.02 ÷ 200 klux (3 ranges) | Silicon photodiode, V(λ) curve | 65x58x52mm | 16 ÷ 30Vdc (0÷10Vdc) · 10.8 ÷ 30Vdc (4÷20mA) | IP67
DPF Sensors logo
SIL Pressure. Liquids.
Shopping Basket